Debate

  • Author: Anonymous
    Comment: They already got hackintosh for macOS Tahoe 26🥀🥀

    Reply to Anonymous
  • Author: Anonymous
    Comment: NO

    Reply to Anonymous
  • Author: Anonymous
    Comment: Same here

    Reply to Anonymous
  • Author: Anonymous
    Comment: i use sequoia on my 2011 imac but i recommend ventura because its the newest that doesnt have any glitches and after doing the root patches everything works

    Reply to Anonymous
  • Author: Anonymous
    Comment: Its works!

    Reply to Anonymous
  • Author: Anonymous
    Comment: Do you mind sharing your EFI file?

    Reply to Anonymous
  • Author: Anonymous
    Comment: tnx for sharing

    Reply to Anonymous
  • Author: Anonymous
    Comment: it doesn't support,i have it too:(


    Reply to Anonymous
  • Author: Anonymous
    Comment: i have written this on reddit

    Reply to Anonymous
  • Author: Anonymous
    Comment: Ventura works pretty straight forward, sonoma needs some tinkering, sequoia needs a lot of tinkering with wifi and bluetooth, but in the end it works.

    Reply to Anonymous
  • Author: Anonymous
    Comment: You both need to read the guide. Pentium and Celeron processors are NOT supported by macOS, period. You’d be better off trying to use an AMD machine.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Update link please

    Reply to Anonymous
  • Author: Anonymous
    Comment: Ссылки не работают.

    Reply to Anonymous
  • Author: Anonymous
    Comment: is not 11gen cometlake and not tigerlake?


    Reply to Anonymous
  • Author: Anonymous
    Comment: Wut happening?

    Reply to Anonymous
  • Author: Anonymous
    Comment: The oclp installer you have prepared for your mac is 14.7.1 (23H222) - newer than the already downloaded and "waiting" update.
    Make an oclp installer for your mac with macOS 14.7 (23H124) and install this version first.
    You have to "flush" the old updater, because it is already on your mac - and ready to install.
    ther is another way (yt: "OCLP SystemVersion.plist BuildVersion Mismatch Error - How to Fix!"), but this one works also fine

    Reply to Anonymous
  • Author: Anonymous
    Comment: Great work! But is there any updates on hynix ssd and wifi?

    Reply to Anonymous
  • Author: Anonymous
    Comment: Merci beaucoup


    Reply to Anonymous
  • Author: Anonymous
    Comment: Same Intel Gemini Lake...Please someone help we the pentium users hold a significant share dont leave us behind....Please create one EFI for Gemini Lake as well!

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Hi fellow, Intel Xe Graphics is supported on Hackintosh, but the support can be limited and requires careful configuration

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: Hackintosh doesnt support intel xe graphics


    Reply to Anonymous
  • Author: Denni
    Comment: DMG Could be incorrect or corrupt

    Reply to Denni
  • Author: Anonymous
    Comment: Thank you dude

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Hey there! The "https://panic.apple.com" error usually points to a kernel panic due to incompatible EFI settings or missing kexts. Here are some steps you can try to fix it on your Dell OptiPlex 7010:

    Update OpenCore and Kexts: Make sure you're using the latest OpenCore version and up-to-date kexts (especially Lilu, WhateverGreen, AppleALC, and VirtualSMC).

    SMBIOS Settings: Use an SMBIOS compatible with Ivy Bridge, like iMac13,1 or iMac13,2. Open config.plist and set PlatformInfo > Generic > SystemProductName to one of these.

    Disable Unnecessary Features: In config.plist, enable DisableIoMapper under Kernel > Quirks (helps with older systems) and disable AppleCpuPmCfgLock and AppleXcpmCfgLock if CFG Lock can’t be disabled in BIOS.

    BIOS Config: Go into BIOS and set SATA mode to AHCI, disable VT-d (if present), Secure Boot, and CFG Lock if possible.

    Handle Graphics: AMD Radeon HD 7470 might be causing issues. Use -wegnoegpu boot argument with WhateverGreen to disable unsupported GPUs temporarily or try running with only one GPU if possible.

    Verbose Mode: Add -v to boot args (in NVRAM > Add > boot-args in config.plist) to boot in Verbose Mode and get more detailed error messages.

    Extra Quirks: For Ivy Bridge CPUs, set ProvideCustomSlide to true under Booter > Quirks.

    After applying these changes, rebuild the EFI on your USB and give it another try. If you still get panics, check the Verbose output for any specific error messages – they can help pinpoint what’s wrong. Good luck!

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: did you find out? i also have a i5-1245 and want to make a
    hackintosh

    Reply to Anonymous
  • Author: Anonymous
    Comment: i have a dell optiplex 7010 dt, 12gb ram, i5-3540, 2 amd radeon hd 7470 graphics card, i tried installing monterey using opencore guide, but i got stuck at "please go to https //panic.apple.com to report this panic". i cant proceed any futher becuase i cant find a solution😔

    Reply to Anonymous
  • Author: Karmic Alice
    Comment: Already working 😍😘

    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: omg

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: Thank you 🙏

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Enjoy your fix

    Reply to Ufuk Durgun
  • Author: RoundAd
    Comment: That is my reddit post, quit stealing posts

    Reply to RoundAd
  • Author: Ufuk Durgun
    Comment: UPDATED: iDeneb v1.6 10.5.8 LE (For old PC) [2012]

    Reply to Ufuk Durgun
  • Author: birthday places in bangalore
    Comment: Searching for the best place to celebrate your birthday in Bangalore? Look no further, as the city provides a diverse range of venues and attractions to ensure an unforgettable celebration. From upscale restaurants to unique party spaces, Bangalore has everything you need to make your birthday a truly remarkable experience.

    Reply to birthday places in bangalore
  • Author: Anonymous
    Comment: link not work. EFI please :(

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hi I trying to install on my specs but not install
    I7-3770
    16 gb ram ddr3
    Main giga b75 uefi bios
    Rx 580 xfx
    Help me

    Reply to Anonymous
  • Author: Alexey
    Comment: Hello there! Can you help me with install? I have the same notebook (Fx 505DT), but ryzen 5 3550H. if you can, please contact me through Telegram: @memphis_exploit , im very bad speaking and writing on eng cause of i living in Russia. have a nice day!

    Reply to Alexey
  • Author: Anonymous
    Comment: https://cryptpad.fr/drive/#/2/drive/view/G+83I7JiOToddretjlv+gVIB40dc8VgfFWkoroJBlMM/p/


    Reply to Anonymous
  • Author: Priamo
    Comment: Hey, please call me vía WhatsApp

    https://call.whatsapp.com/video/idIvy8HZFykUQ4lnqWGmNj


    Reply to Priamo
  • Author: Tonymacx86
    Comment: Setting up a Hackintosh (Mac OS X on non-Apple hardware) can be complex. Here’s a basic guide to get you started:

    Steps for Installing Mac OS X on HP 15-f023wm with Linux Mint (Dual Boot):

    1. Check Hardware Compatibility:
    • Ensure your HP 15-f023wm hardware is compatible with the version of Mac OS X you plan to install.
    2. Download macOS Installer:
    • Obtain the macOS installer for the version you want (Lion to El Capitan).
    3. Create a macOS Bootable USB:
    • Use a Mac or a Hackintosh to create a bootable USB installer using tools like UniBeast.
    4. Prepare Your Linux Mint System:
    • Backup important data.
    • Resize your Linux Mint partition to make space for macOS using GParted.
    5. Install macOS:
    • Boot from the USB installer.
    • Use Disk Utility to format the new partition to “Mac OS Extended (Journaled)” format.
    • Proceed with macOS installation.
    6. Install Clover Bootloader:
    • After installing macOS, boot back into the USB installer.
    • Install Clover Bootloader on the macOS partition.
    • Configure Clover to manage dual boot with Linux Mint.
    7. Post-Installation:
    • Install necessary kexts (drivers) for your hardware.
    • Configure the config.plist file in Clover to optimize boot settings.
    8. Dual Boot Configuration:
    • Ensure Clover can see both macOS and Linux Mint.
    • You may need to tweak BIOS settings and Clover configurations to get everything working smoothly.

    Tools & Resources:

    • UniBeast: Tool for creating a bootable macOS USB installer.
    • MultiBeast: Post-installation tool for installing drivers and configuring Clover.
    • Clover Bootloader: Preferred bootloader for Hackintosh systems.

    Note:

    • Compatibility: Research specific compatibility for HP 15-f023wm hardware.
    • Legal: Installing macOS on non-Apple hardware violates Apple’s End User License Agreement (EULA).

    For detailed guides and community support, visit TonyMacx86 or Hackintosh Zone.

    If you have specific questions or encounter issues during the process, the Hackintosh community forums can be very helpful.

    Reply to Tonymacx86
  • Author: Anonymous
    Comment: Please help

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hello,
    I'm new on this website.
    I got a HP 15-f023wm 15.6" Intel Celeron
    I need install any Mac osx system from lion to El capitan like a secund system (dual boot) with a Linux system MINT already installed.
    Please
    I want to know the most good bootloader for do it easily on linux
    My mail is yannickwilfried.rw@yandex.com


    Reply to Anonymous
  • Author: Anonymous
    Comment: Nah bro. Just switch card

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hello. I am PC

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hi Christian,
    I had the same issue. MacBookPro12,1:
    1. First boot after update: no WLAN. Not possible to patch with V1.4 OCPL because OPCL App destroyed
    2.Got an old one V0.5.x from a backup, patched the system again. Then no internal keypad, mousepad. Just BT worked.
    3. Able to boot in secure mode, used an external keypad (BT not working) but not able to get an internet connection. After some more things I stuck into the situation as you described. Nothing was possible any more.

    x. Decided to install legacy OSC (Catalina) and recovered data from backup.

    x+1. Now my computer is running OPCL 1.4.2 (not 1.4.3 because of the non-metal issue) with OSX Ventura 13.6.6)

    I struggle to make a new try because of 3 days of work ...

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Try this updated to Monterey:
    https://github.com/iamthaoly/amd-laptop-hackintosh

    Reply to Ufuk Durgun
  • Author: Dev ratan
    Comment: page not found 😢

    Reply to Dev ratan
  • Author: Anonymous
    Comment: Tomorrow

    Reply to Anonymous
  • Author: Anonymous
    Comment: Thank you Ufuk

    Reply to Anonymous
  • Author: Anonymous
    Comment: use tigerlake efi folder from olarila

    but ur hardware dont work perfect. this igpu dont have support

    Reply to Anonymous
  • Author: Karmic Alice
    Comment: Creating an EFI for a Hackintosh with OpenCore can be quite detailed and requires specific configuration based on the hardware you're using. Here's a general step-by-step guide to get you started, but keep in mind that you may need to adjust the steps based on the specifics of your build and the version of macOS you're planning to install.

    ### Title:
    "Building an OpenCore EFI Folder for Intel Celeron G3900 and Gigabyte H110M Hackintosh"

    ### Guide Step by Step:

    1. **Gather Required Resources:**
    - Download the latest version of OpenCore.
    - Download the necessary kexts (kernel extensions) such as Lilu, WhateverGreen, VirtualSMC, AppleALC, RealtekRTL8111, and any others required for your hardware.
    - Obtain the SSDT files for CPU power management and any other necessary ACPI patches.

    2. **Set Up EFI Structure:**
    - Create the EFI folder structure on a FAT32 formatted USB drive with `EFI/OC`.
    - Place the OpenCore `BOOTx64.efi` and `OpenCore.efi` in `EFI/BOOT` and `EFI/OC` directories, respectively.

    3. **Configure config.plist:**
    - Use a plist editor like ProperTree to edit your `config.plist`.
    - Under ACPI, add any necessary SSDT files.
    - Under DeviceProperties, add properties for your GPU and audio layout-id.
    - Under Kernel, add the kexts you have downloaded.
    - Under Misc, configure boot settings and debug options.
    - Under NVRAM, set appropriate boot-args (like `debug=0x100`, `keepsyms=1`, `-v` for verbose mode).
    - Under PlatformInfo, generate a serial number and other SMBIOS information appropriate for a similar real Mac model.
    - Under UEFI, configure drivers and input options.

    4. **Create ACPI SSDTs:**
    - Use SSDTTime or a similar tool to generate SSDT files for your CPU and other components. Place these files in `EFI/OC/ACPI`.

    5. **Add Kexts:**
    - Place your kexts in `EFI/OC/Kexts`. Ensure you have the latest versions compatible with your macOS version.

    6. **Add UEFI Drivers:**
    - Place necessary UEFI drivers (like HfsPlus.efi or OpenHfsPlus.efi) in `EFI/OC/Drivers`.

    7. **Finalize config.plist:**
    - Validate your `config.plist` with the OpenCore Configuration Sanity Checker or a similar tool.

    8. **BIOS Configuration:**
    - Adjust your BIOS settings according to OpenCore's recommendations. This typically includes settings like disabling CSM, enabling AHCI, disabling Secure Boot, and others.

    9. **First Boot:**
    - Boot from the USB drive, and if everything is configured correctly, you should reach the macOS installer.

    10. **Troubleshooting:**
    - If you encounter boot issues, reference the troubleshooting section of the OpenCore documentation.

    11. **Post-Installation:**
    - After successful installation, mount the EFI partition of your installed macOS and copy the EFI folder from the USB to the EFI partition.

    ### Conclusion:
    This guide provides a framework for building an EFI folder for your specific hardware using OpenCore. Given the complexity of the process, you should expect to spend some time on troubleshooting and possibly seeking help from the Hackintosh community for issues specific to your hardware.

    Remember, creating a Hackintosh is a complex process and is against Apple's End User License Agreement. The stability and functionality of a Hackintosh can vary greatly, and there is always a risk of data loss or other issues, so ensure you have backups and proceed with caution.

    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: Incompatibility:

    CPU - AMD V140: While some AMD processors can be used for Hackintosh builds, they require specific patches and are more complex to configure than Intel CPUs. The AMD V140 is an older, single-core processor that lacks the performance and features required to run modern macOS versions effectively.

    GPU - AMD ATI Mobility Radeon HD 4225: This is an outdated GPU architecture that macOS Sonoma does not support. Modern macOS versions require more recent graphics hardware for proper functionality and acceleration.

    RAM - 2 GB (upgradable to 4 GB): macOS Sonoma's system requirements exceed the amount of RAM you currently have, and even with an upgrade to 4 GB, it would be the bare minimum for running macOS, resulting in poor performance.

    Motherboard - eME442 V2.03: Compatibility details are not provided, but given the age of the associated CPU and GPU, it is likely that the motherboard may not support the necessary features for macOS Sonoma, such as UEFI firmware.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: does anybody still have a link???? i cant get one from anywher, and i need lion, not ml.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Can you please provide the download link for this EFI? I have been trying a lot to make a successful HPintosh, yet alone the same model as yours.

    Reply to Anonymous
  • Author: macxasus86
    Comment: Indeed, Alder Lake architecture poses challenges for Hackintosh due to limited support for these newer Intel CPUs. The Hackintosh community often takes time to adapt to new hardware. Keep an eye on updates from OpenCore or Clover and Hackintosh forums for any new developments that might improve compatibility with Alder Lake laptops.

    Reply to macxasus86
  • Author: Anonymous
    Comment: Me too man, I think our laptops are just not supported as they have Alder Lake architecture that isnt supported

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Guide: Installing Hackintosh on a Surface Pro 4

    This guide is for intermediate users who have basic knowledge of PCs and macOS but may be new to Hackintosh installations.

    Steps to Install Hackintosh on a Surface Pro 4

    1. Compatibility Check:
    - Verify the hardware compatibility of Surface Pro 4 with the latest macOS. Typically, Surface devices have mixed compatibility due to their unique hardware configurations.

    2. Backup Data:
    - Ensure all important data on the Surface Pro 4 is backed up, as the installation process may erase all data.

    3. Create a macOS Installer:
    - Use a Mac or a Hackintosh to download the latest macOS version from the App Store.
    - Create a bootable USB drive using tools like BalenaEtcher or UniBeast.

    4. Prepare BIOS Settings:
    - Access the Surface Pro 4's BIOS and disable Secure Boot.
    - Change the boot order to prioritize booting from USB.

    5. **Install macOS**:
    - Insert the bootable USB into the Surface Pro 4.
    - Boot from the USB and follow the on-screen instructions to install macOS.
    - During installation, customize the installation for your specific hardware, if necessary.

    6. **Post-Installation Setup**:
    - Install necessary drivers for components like Wi-Fi, Bluetooth, and audio. Surface Pro 4 might need specific drivers due to its unique hardware.
    - Use tools like MultiBeast for driver installation and Clover Configurator for post-installation tweaks.

    7. **Troubleshooting**:
    - If you encounter issues, seek assistance from Hackintosh communities or forums.

    #### Visual Aids:
    - Include screenshots of BIOS settings and installation steps.

    #### Feedback and Questions:
    - Set up a comment section under the guide for readers to ask questions or provide feedback.

    #### Regular Updates:
    - Keep the guide updated with the latest macOS versions and compatibility information.

    #### Note:
    Surface Pro 4's hardware may not be fully compatible with the latest macOS. Research and community support are crucial for a successful Hackintosh installation on such devices.



    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: Creating a Hackintosh on a Dell XPS 9365 2-in-1 involves several steps:

    1. Compatibility Check: Ensure your hardware is compatible with macOS. The Dell XPS 9365 2-in-1 has partial compatibility, with the fingerprint reader and SD card slot likely not working.

    2. Backup Data: It's important to back up your data before starting.

    3. Create a macOS Installer:
    - Download the macOS version you wish to install.
    - Use a tool like UniBeast to create a bootable USB drive.

    4. Prepare BIOS Settings:
    - Disable Secure Boot.
    - Switch SATA operation mode to AHCI.
    - Turn off Fast Boot and VT-d, if available.

    5. Gather Necessary Kexts and Drivers:
    - Find kexts (kernel extensions) for Ethernet, WiFi, audio, and graphics.

    6. Install macOS:
    - Boot from the USB drive.
    - Follow the installation process.
    - Use Disk Utility to format the drive if necessary.

    7. Post-Installation:
    - Install a bootloader like Clover or OpenCore.
    - Place the kexts and drivers in the EFI partition.

    8. Troubleshooting:
    - For issues like non-working audio or networking, search for specific kexts or solutions in Hackintosh forums.



    Reply to Anonymous
  • Author: Anonymous
    Comment: The message you're encountering indicates a "Kernel Panic" on a Mac, which is a critical system error. It can be due to hardware or software issues. Here are some steps to try:

    1. Restart your computer.
    2. If it continues, try booting in Safe Mode (hold the Shift key while booting).
    3. Check for any pending software updates.
    4. If the issue persists, consider backing up your data and reinstalling the operating system.
    5. If none of these steps resolve the issue, it could be a hardware problem. In that case, it might be best to seek professional technical support.

    Reply to Anonymous
  • Author: Anonymous
    Comment: yes with Ventura, everything work except fingerprint and sd card

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: To fix the sleep issue:

    1. Verify Ventura's energy settings to avoid conflicts.
    2. Update your BIOS and drivers.
    3. Review your `config.plist` for potential misconfigurations.
    4. Monitor and close unnecessary background processes.
    5. Ensure your hardware, especially the spoofed HD Graphics, is not causing conflicts.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: For macOS Sonoma installation:

    1. Use tonymacx86's guide for a USB installer with Clover or OpenCore.
    2. Follow EliteMacx86 for new installations or upgrading from Ventura.
    3. Consult TechsViewer for virtual machine installations.
    4. Check guides for Wi-Fi setup and motherboard-specific configurations.
    5. Review AMD Radeon Graphics software setup.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Excited to share that I've successfully installed macOS Ventura on my TigerLake laptop, with all functions like WiFi, Bluetooth, and HDMI working fine. Here’s how I did it:

    1. **Hardware Check**: Ensure your Intel 11th Gen (TigerLake) is compatible with iATKOS Project. Check on the Guide website.

    2. **Bootable USB**: Create one using a tool like Etcher.

    3. **Download macOS Installer**: Available on the Apple website.

    4. **Configure**:
    - SMBIOS: Set to iMac19,1.
    - PlatformInfo: Set to 0x04000080.
    - GraphicsDevice: Set to IGPU.

    5. **Install macOS**: Boot from USB and follow instructions.

    6. **Install Drivers**: Get additional drivers from the manufacturer's website.

    7. **Update macOS**: Once all drivers are installed, update to the latest macOS version.

    and driver placement.

    **Final Touches**:
    - Test HDMI, WiFi, Bluetooth, sleep, wake, and power management features.

    **Troubleshooting**:
    - Use verbose boot for diagnostics.
    - Seek help from the iATKOS Project communit

    Hope this helps. Stay tuned for the video!

    Reply to Ufuk Durgun
  • Author: Pawan
    Comment: GPU not working

    Reply to Pawan
  • Author: Karmic Alice
    Comment: To fix the issue where your Mac Pro 5,1 with an unflashed Radeon RX 580 GPU only boots from the USB drive and not from the macOS drive, follow these steps:

    1. Start Up in Recovery Mode: Restart your Mac and immediately hold down `Command` + `R` until you see an Apple logo or spinning globe. This will boot your Mac into Recovery Mode.

    2. Check Startup Disk**: Once in Recovery Mode, go to `Utilities` in the menu bar, and select `Startup Disk`. Make sure your macOS drive is selected as the startup disk.

    3. Repair Disk Permissions**: Open `Disk Utility` in Recovery Mode. Select your macOS drive and perform `First Aid` to repair any disk permissions issues.

    4. Reinstall Bootloader**: If the issue persists, reinstall the bootloader on your macOS drive. This can be done using the Terminal in Recovery Mode, using the appropriate commands for your bootloader (e.g., Clover, OpenCore).

    5. Check EFI Partition**: Make sure the EFI partition on your macOS drive is correctly configured and contains the necessary bootloader files. You might need to manually copy these files from the USB drive to the EFI partition on the macOS drive.

    After completing these steps, restart your Mac without the USB drive inserted and see if it boots directly into macOS. If the problem continues, consider seeking professional technical support, as the issue might be more complex.

    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: To fix the black screen issue on wake in your Ryzentosh when a USB is plugged in, consider these steps:

    1. Check ACPI Patches: Ensure your ACPI patches are correctly applied.
    2. Update BIOS: Sometimes a BIOS update can resolve hardware compatibility issues.
    3. USB Port Mapping: Properly map your USB ports; this often fixes issues related to USB devices.
    4. Check Sleep Settings: Adjust sleep settings in macOS and in your BIOS.
    5. Community Forums: Seek advice on specific Ryzentosh or Hackintosh forums where users might have encountered similar issues.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: wtf let me download it NOW!!!

    Reply to Anonymous
  • Author: Anonymous
    Comment: I have the same problem in mi HP laptop R5 3500U

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: To install macOS on an Asus E403S with a Braswell CPU:

    1. Download a compatible macOS version.
    2. Create a bootable USB with UniBeast.
    3. Install a custom kernel for Braswell CPUs.
    4. Adjust BIOS settings for Hackintosh compatibility.
    5. Boot from the USB and follow the installation process.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: How on earth did you upgrade the CPU in an iMac?

    Reply to Anonymous
  • Author: Anonymous
    Comment: How u do that can u help me pls

    Reply to Anonymous
  • Author: Anonymous
    Comment: cant install mac os big sur gets stuck at 2 hours 19 mins i using broadwell notebook olarila efi

    Reply to Anonymous
  • Author: Anonymous
    Comment: Installation Done Correctly, Patch after instalation successfull, but when i Boot into the ML Partition got stuck into the Apple Logo

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: You would typically need to follow these steps:

    Compatibility Check:

    Verify if your hardware components are compatible with macOS.
    Some hardware may not work or may require additional drivers or configuration.
    Backup Your Data:

    Before attempting to install macOS on your machine, ensure that you have backed up all important data.
    Create a Bootable USB Drive:

    Create a bootable USB drive with macOS installer and a Hackintosh bootloader like Clover or OpenCore.
    Configure BIOS:

    Modify certain BIOS settings on your HP machine to support macOS.
    Install macOS:

    Boot from the USB drive and follow the on-screen instructions to install macOS.
    Install Necessary Drivers and Bootloader:

    After installing macOS, install any necessary drivers for your hardware.
    Install the bootloader on the hard drive to ensure that you can boot into macOS without the USB drive.
    Troubleshooting:

    You may encounter issues during or after the installation which will require troubleshooting.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: There is a thing called BigSurface that mattkc used in a hackintoshing video. Maybe you can try that? https://github.com/Xiashangning/BigSurface/releases/tag/v6.5

    Reply to Anonymous
  • Author: Anonymous
    Comment: trash. show proof if you want use to believe its real. Also, any good person with a bit of common sense would have told their system config. You just wrote TigerLake. MacOS can work on TigerLake if you have a different GPU (not iGPU)

    Reply to Anonymous
  • Author: Anonymous
    Comment: Thank you so much Ufuk

    Reply to Anonymous
  • Author: Anonymous
    Comment: Happy to answer the call

    Reply to Anonymous
  • Author: iDeneb
    Comment: The Mac Pro 5,1 (Mid 2010/Mid 2012) isn't officially supported by macOS Monterey, but the community has found various ways to get it working, and one common way is via the OpenCore bootloader, which seems like the method you're employing.

    Firstly, there are a few common hurdles to getting AMD GPUs working on these systems:

    NVRAM: The NVRAM settings you mentioned are crucial for the GPU to work properly. The boot arguments you've used seem correct for most Navi-based cards.

    BIOS Switch: Some GPUs come with a dual BIOS switch. If your card has one, try flipping the switch to the other position.

    AGPM (Apple Graphics Power Management): Sometimes, Apple's graphics power management can interfere with the card. While agdpmod=pikera can help, sometimes more adjustments are needed.

    Given the details you've provided, here are some steps to troubleshoot:

    Check GPU Power Connectors: Ensure that the GPU is properly seated and that any required power connectors are securely connected.

    SMBIOS: Within your OpenCore config.plist, ensure that you're using an SMBIOS that's compatible with macOS Monterey. While it might be tempting to use the MacPro5,1 SMBIOS, it's probably more beneficial to use a more modern one, like iMacPro1,1, especially with your graphics card.

    Update Kexts and OpenCore: Ensure that you're using the latest versions of OpenCore and all your kexts. Compatibility and stability often improve with each release.

    Recheck WhateverGreen boot-args: Make sure you've set the correct boot arguments. In most cases, for Navi-based GPUs, the boot-args agdpmod=pikera should be sufficient.

    Check OpenCore Configurations: Verify that your config.plist settings are correct, especially under the DeviceProperties section. You may need to add specific properties for your GPU.

    Logs and Debugging: If all else fails, gather logs. OpenCore has built-in logging, and you can analyze these logs to see if there's anything glaringly wrong. Look for errors related to WhateverGreen, Lilu, or other GPU-related issues.

    Community Forums: The Mac Pro community and Hackintosh community are vast and incredibly helpful. Sites like MacRumors Forums, InsanelyMac, and others have dedicated threads for Mac Pro and Monterey. If you're unable to find a solution, sharing your exact issues and steps on these forums might get you assistance from someone who faced a similar problem.

    Consider Other GPUs: If you find it too challenging to get the RX6600XT working, consider using another GPU that's more commonly supported in the community. Many people have had success with the RX 5700 XT, for instance.

    Remember, when dealing with OpenCore on unsupported Mac hardware, patience is crucial. Sometimes it's a simple oversight or a combination of factors that can make the difference between a non-working system and a smooth experience.

    Reply to iDeneb
  • Author: Niresh
    Comment: Hey, no worries, your machine looks ready for some Hackintosh action! With the iATKOS Project, you're in good hands, but you've got to be careful with that 1050 Ti GPU. Apple and NVIDIA haven't been on the best of terms lately.

    Your i5 4460 and ASRock H81M-VG4 R2.0 should work like a charm, but the GPU might give you a headache on newer macOS versions. Stick to macOS High Sierra (10.13) - it's your best bet to get everything humming smoothly.

    Make sure to grab the right kexts for your hardware, take your time with the config.plist, and don't forget to have a bootable USB handy just in case. You'll have that Mac-like experience on your rig in no time. Good luck, and feel free to drop me a line if you run into any snags!

    - Niresh

    Reply to Niresh
  • Author: Anonymous
    Comment: SAME

    Reply to Anonymous
  • Author: Karmic Alice
    Comment: Yes, it is possible to downgrade OpenCore's root patches. However, I'd like to note that downgrading versions should be done cautiously because it may affect system stability and compatibility. Please remember to back up all your data before making any changes. Here's how to do it:

    1. Go to the OpenCore repository on GitHub: https://github.com/acidanthera/OpenCorePkg.

    2. Click on the "Tags" tab. You'll see a list of all the different versions of OpenCore that have been released.

    3. Download the version 0.6.7 zip file and extract it.

    4. In your EFI folder, replace the BOOT and OC folders with the ones from the 0.6.7 zip file.

    5. If you made any changes to the config.plist file or added any additional kexts, drivers, or SSDTs, you'll have to manually add those back.

    6. After replacing these files, restart your computer.

    Please note that root patches are designed to work with specific versions of macOS, so if you've recently updated your operating system, the patches might not work with the older version of OpenCore.

    If the application continues to have issues after downgrading, it might be a compatibility issue with the application itself and the version of macOS you're running, rather than a problem with OpenCore. In that case, you should reach out to the developers of the application for support.

    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: Follow the steps below as a guideline on how to share your successful Hackintosh installation process:

    Collect Necessary Hardware and Software:

    Ryzen 7 3700X CPU
    RTX 2060 GPU
    A compatible motherboard, RAM, SSD/HDD, and power supply
    A Mac system to download macOS, or a pre-made macOS installer ISO/image
    A USB drive of at least 16GB
    Prepare your USB Installer:

    Use a Mac system to download macOS from the App Store.
    Format the USB drive as Mac OS Extended (Journaled) using Disk Utility.
    Create a bootable USB drive using createinstallmedia command in Terminal or a tool like Unibeast.
    Configure BIOS settings:

    Turn off Fast Boot and Secure Boot.
    Enable AHCI for SATA mode.
    Enable XHCI Handoff.
    Prepare your Config.plist:

    Use OpenCore or Clover Configurator to generate a config.plist.
    Use appropriate kexts for your system, such as Lilu, WhateverGreen, VirtualSMC, AppleALC, etc.
    Configure your config.plist according to the Dortania OpenCore Guide for Ryzen systems.
    Install macOS:

    Boot from the USB drive.
    Format your target drive using Disk Utility.
    Install macOS.
    After the installation, boot from the USB drive again, but this time choose your newly installed macOS drive.
    Post-Installation:

    Install Clover or OpenCore to your macOS drive.
    Copy EFI from USB drive to the EFI partition of your macOS drive.
    Install necessary kexts using KextBeast or manually copy them to your Clover or OpenCore kexts folder.
    Nvidia GPU Workaround:

    Since macOS does not natively support Nvidia GPUs after High Sierra, use macOS versions High Sierra or before.
    Install the appropriate Nvidia Web Drivers for your macOS version.
    Check Everything:

    Make sure audio, networking, GPU acceleration, sleep/wake, and all other system components are working.
    If not, troubleshoot each non-working component by checking your config.plist, kexts, and BIOS settings.

    Note: Make sure you follow each step carefully and ensure that you have compatible versions of macOS, drivers, and BIOS settings for your hardware.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Hey Matheo, based on the details you've provided, here are a few steps that might help fix your issue:

    1. Reset your network settings: On macOS, you can reset your network settings by deleting the following files from `/Library/Preferences/SystemConfiguration/`:

    - com.apple.airport.preferences.plist
    - NetworkInterfaces.plist
    - preferences.plist

    After deleting these files, reboot your system. Please keep in mind that this will reset all network settings, including stored WiFi networks and passwords.

    2. Reinstall your WiFi kext: Reinstall the AirPortBrcmFixup.kext. Ensure that you have the latest version of the kext. Also, double-check your config.plist to make sure you've correctly set MaxKernel.

    3. Check your hardware: Ensure that your WiFi card is properly seated in its slot and that it's not showing any signs of physical damage. It's possible, though unlikely, that the card might have suddenly failed.

    4. Try a different OS or Linux live CD: Boot into a different operating system (like Ubuntu, as you mentioned) or a live Linux CD to see if the WiFi is working there. If it's not, this might be a hardware issue.

    :)

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: Poderia compartilhar sua EFI ? Meu email jonathanssu@gmail.com

    Reply to Anonymous
  • Author: Anonymous
    Comment: when will the vault be open?

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: The best SMBIOS for an i5-8250u is MacBookPro15,4. This is because the i5-8250u is a Kaby Lake-R processor, and MacBookPro15,4 is the SMBIOS for a MacBook Pro with a Kaby Lake-R processor. This will give you the most accurate results in terms of hardware detection and performance.

    Other SMBIOSes that may work well for an i5-8250u include MacBookPro13,3 and MacBookPro15,2. However, MacBookPro15,4 is the most recommended SMBIOS for this processor.

    Here are some of the reasons why MacBookPro15,4 is the best SMBIOS for an i5-8250u:

    * It has the same Kaby Lake-R processor as the i5-8250u.
    * It has the same amount of RAM (up to 32GB) as the i5-8250u.
    * It has the same maximum supported resolution (2880x1800) as the i5-8250u.
    * It has the same supported graphics card (Intel Iris Plus Graphics 650) as the i5-8250u.

    If you are using an i5-8250u, I recommend using the MacBookPro15,4 SMBIOS for the best results.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: https://github.com/gorouflex/amdlaptophackintosh

    Reply to Anonymous
  • Author: Anonymous
    Comment: Yes you can, here is an example : https://github.com/gorouflex/amdlaptophackintosh

    Reply to Anonymous
  • Author: Karmic Alice
    Comment: Certainly! To generate a compatible SMBIOS for macOS Catalina using macserial (OpenCore) or GenSmbios, you can follow these steps:

    1. Download and install macserial or GenSmbios, depending on your preference.

    2. Open the terminal or command prompt on your macOS system.

    3. Run the following command to generate a compatible SMBIOS using macserial:
    ```
    macserial -a
    ```
    This command will generate a new set of SMBIOS values. You can then choose the appropriate SMBIOS product, such as MacBookPro14,1 or iMac19,1, which are known to be compatible with macOS Catalina.

    4. Alternatively, if you prefer to use GenSmbios, follow these steps:
    - Download and extract the GenSmbios package.
    - Open the terminal or command prompt and navigate to the extracted GenSmbios folder.
    - Run the following command to generate a new SMBIOS:
    ```
    ./GenSmbios.command
    ```
    - Select the appropriate SMBIOS product for macOS Catalina from the provided options.

    5. After generating the new SMBIOS, you can update your Hackintosh EFI configuration with the newly generated values. This step will ensure compatibility with macOS Catalina.



    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: It seems that you are facing issues with updating the EFI for your Hackintosh system to work with macOS Ventura. Here are a few suggestions to help you resolve the problem:

    1. Ensure EFI Compatibility: Check if the EFI package you are using is compatible with macOS Ventura. Sometimes, newer macOS versions require specific updates or modifications to the EFI. You can look for updated versions or patches specifically designed for Ventura.

    2. Verify BIOS Settings: Make sure that your BIOS settings are properly configured for Hackintosh compatibility. Check if there are any specific settings recommended for macOS Ventura and ensure they are correctly set.

    3. Check Bootloader Configuration: Review your bootloader configuration, whether it's Clover or OpenCore, and ensure that it is up to date with the necessary settings for macOS Ventura. Verify that all kexts, drivers, and ACPI patches are compatible with Ventura.

    4. Update Kexts and Drivers: Make sure that all the necessary kexts (kernel extensions) and drivers are updated to their latest versions. Sometimes, compatibility issues arise due to outdated or incompatible kexts and drivers.

    5. Seek Community Support: Reach out to Hackintosh communities or forums for assistance. Other users with similar hardware and experiences might have found solutions or workarounds specific to your situation.

    Remember that updating to a newer macOS version on a Hackintosh system can sometimes require extra troubleshooting and adjustments. It's essential to backup your data and have a plan in case something goes wrong during the update process.



    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: If you understand Portuguese:
    Use o macserial (opencore) ou GenSmbios para gerar uma smbios de um produto que é compatível com o macos catalina

    Reply to Anonymous
  • Author: winmacmacwin
    Comment: OpenCore is primarily designed for Hackintosh systems, which are non-Apple computers running macOS. However, it is not recommended or necessary to use OpenCore on a genuine MacBook Air 2017 or any other Apple Mac device.

    MacBook Air 2017 comes preloaded with macOS, and it is designed to run smoothly and efficiently with the macOS operating system. OpenCore is typically used for custom-built PCs or non-Apple hardware to enable macOS compatibility.

    If you own a MacBook Air 2017, it is recommended to use the official macOS updates provided by Apple rather than attempting to install OpenCore or modify the system. This ensures a stable and supported experience on your Apple device.

    If you have specific requirements or questions regarding your MacBook Air 2017, it is best to consult Apple's official documentation or reach out to their support channels for assistance.

    https://twitter.com/winmacmacwin/status/1678619306194550784?s=19

    Reply to winmacmacwin
  • Author: Ufuk Durgun
    Comment: Hello fellow! Upgrading to macOS Monterey or macOS Ventura on your Lenovo IdeaPad 300-15ISK with an i7-6500U Skylake architecture is possible. However, I can't provide you with specific EFI files as they are typically specific to each individual system configuration.

    To install either macOS Monterey or macOS Ventura on your laptop, you'll need to create a compatible EFI configuration for your hardware. Here are the general steps you can follow:

    1. Research compatible EFI configurations: Look for existing EFI configurations for Skylake-based laptops similar to yours. Websites and forums dedicated to Hackintosh communities, such as tonymacx86 and InsanelyMac, can be good resources to find EFI configurations for your specific hardware.

    2. Download the necessary files: Once you find a suitable EFI configuration, download the necessary files, including the bootloader (e.g., OpenCore or Clover) and any additional kexts or drivers required for your hardware.

    3. Configure the EFI: Configure the EFI files according to your hardware specifications. This involves editing configuration files, such as the config.plist file, to match your system's hardware settings, including CPU, graphics, audio, and network.

    4. Create a bootable USB installer: Use the EFI configuration files to create a bootable USB installer for macOS Monterey or macOS Ventura. You can use tools like gibMacOS or createinstallmedia to create the installer.

    5. Install macOS: Boot your laptop from the USB installer and proceed with the installation of macOS Monterey or macOS Ventura. Follow the on-screen instructions and select the appropriate options during the installation process.

    Remember that installing macOS on non-Apple hardware (Hackintosh) may require additional troubleshooting and customization, and results may vary depending on your specific hardware configuration. It's essential to research and understand the process thoroughly before attempting the installation.

    Additionally, always make sure to back up your data before performing any system modifications or installations.



    Reply to Ufuk Durgun
  • Author: Stork
    Comment: This update may break some of your Ventura functions. Make sure you backup first.


    Reply to Stork
  • Author: Karmic Alice
    Comment: "Prepare a bootable USB drive with the macOS Ventura installation image. Configure your BIOS settings to prioritize the USB drive as the boot device. Boot from the USB drive and follow the on-screen instructions to install macOS Ventura on your SSD M.2. After installation, complete the initial setup, install necessary drivers/updates, and configure system preferences. Always refer to specific installation guides for your hardware configuration."

    Remember to create a backup of your data before proceeding. If you have any further questions or encounter any issues, feel free to ask!

    Reply to Karmic Alice
  • Author: Ufuk Durgun
    Comment: If you're experiencing freezing issues during the macOS installation process on your ASUS ROG STRIX G513IH, here are a few steps you can try:

    1. Check your BIOS settings: Ensure that your BIOS settings are properly configured for Hackintosh compatibility. You may need to disable secure boot, enable AHCI mode for your storage devices, and adjust other settings as recommended by Hackintosh guides specific to your motherboard.

    2. Verify your EFI folder: Double-check that your EFI folder is correctly set up with the necessary kexts (kernel extensions) and drivers for your hardware. Pay attention to important kexts like Lilu, WhateverGreen, AppleALC, and VirtualSMC, as they are often crucial for Hackintosh stability.

    3. Update or modify your kexts: Ensure that you're using the latest versions of your kexts, as outdated or incompatible versions can cause issues. If necessary, try different versions or search for alternative kexts that may better support your hardware.

    4. Try alternative boot flags: Experiment with different boot flags during the macOS installation process to see if they resolve the freezing issue. Common boot flags used for troubleshooting include "-v" (verbose mode), "-x" (safe mode), "cpus=1" (limiting to a single CPU core), and "nv_disable=1" (disabling Nvidia graphics).

    5. Remove unnecessary hardware: Disconnect any unnecessary hardware during the installation process, such as external peripherals or additional storage devices. Sometimes, incompatible hardware can cause conflicts or freeze the system.

    6. Search Hackintosh forums and communities: Look for specific threads or forums related to Hackintosh installations on ASUS ROG laptops. Other users may have encountered similar issues and found solutions that work for your specific model.



    Reply to Ufuk Durgun
  • Author: Feartech
    Comment: Use DiskUtility to erase the entire drive

    "click on view and show all devices in DiskUtility"

    Reply to Feartech
  • Author: Tonymacx86
    Comment: While the Merom processor family is older, you can still find resources and information to make it work with macOS on your Dell Latitude D530. Here are a few steps you can take to gather more information and potentially enable compatibility:

    1. **Research and Community Forums**: Look for online communities or forums that focus on Hackintoshing or running macOS on older hardware. Tonymacx86, InsanelyMac, and Reddit's Hackintosh subreddit are popular resources where you can find discussions, guides, and experiences from users who have successfully installed macOS on similar systems.

    2. **Compatibility Guides**: Check Hackintosh compatibility guides, especially those specific to older processors and laptops. While the majority of guides may focus on newer hardware, you might find references to the Merom processor or similar systems. These guides can provide insights into required patches, SSDT configurations, and kernel extensions that may be necessary for successful installation and functioning.

    3. **Search for Success Stories**: Look for success stories or experiences from users who have installed macOS on laptops with Merom processors. They may have shared their journey, troubleshooting steps, and specific configurations that helped them achieve compatibility.

    4. **Experiment and Adaptation**: Since there might be a lack of specific information for Merom processors in recent guides, you may need to adapt existing guides and configurations for similar hardware. Understand the underlying principles and concepts behind the patches, SSDTs, and configuration modifications. With careful research and experimentation, you can tailor them to suit your specific Merom-based system.

    Remember, installing macOS on non-Apple hardware (Hackintosh) requires additional effort and may not be officially supported. Be prepared for potential challenges, compatibility issues, and the need for troubleshooting. Always ensure you have backups of important data before making any changes to your system.

    Additionally, keep in mind that running macOS on unsupported hardware may not provide the best experience in terms of performance, stability, and future compatibility with macOS updates.

    Reply to Tonymacx86
  • Author: Tonymacx86
    Comment: Yes, it is possible to dual-boot Windows 10 and Mojave on a Dell N4050 laptop that uses Legacy (MBR) instead of UEFI (GPT). Here's a general outline of the steps you can follow:

    1. Prepare a Windows 10 Installation Media: Create a bootable USB drive with Windows 10 installation files using the official Windows 10 Media Creation Tool or another reliable method.

    2. Create a Separate Partition: In macOS Mojave, use Disk Utility to create a new partition on your hard drive. This new partition will be used to install Windows 10. Make sure to leave enough space for the Windows installation.

    3. Install Windows 10: Boot your Dell N4050 laptop from the Windows 10 installation USB drive. During the installation process, select the newly created partition as the destination for Windows 10 installation. Follow the on-screen instructions to complete the installation.

    4. Install Clover Bootloader: After Windows 10 is installed, you'll need to install and configure Clover Bootloader to enable dual-booting. Clover is a bootloader that can handle both macOS and Windows on the same system. Install Clover on your macOS Mojave partition using the Clover installer package, and make sure to select the appropriate options for Legacy (MBR) booting during the installation process.

    5. Configure Clover: Once Clover is installed, you'll need to configure it to recognize both the macOS Mojave and Windows 10 installations. This involves editing the Clover configuration file (config.plist) to add the necessary boot entries for both operating systems.

    6. Test Dual-Boot: Restart your Dell N4050 laptop and you should see the Clover bootloader screen. From there, you can select either macOS Mojave or Windows 10 to boot into the respective operating system.

    Please note that the exact steps and configuration options for Clover may vary depending on your specific setup and version of Clover. It's recommended to refer to the Clover documentation or relevant online resources for detailed instructions and troubleshooting guidance specific to your situation.

    Additionally, make sure to back up your important data before proceeding with any partitioning or installation to avoid data loss in case of any unforeseen issues.

    Reply to Tonymacx86
  • Author: Anonymous
    Comment: I doubt you'll find any help here. Why not posting the same topic on InsanelyMac, TonyMacX86 or the r/hackintosh community instead?

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: The ACPI Error: Method parse/execution failed AE_AML_UNINITIALIZED_LOCAL error typically indicates an issue with the ACPI (Advanced Configuration and Power Interface) tables or configuration in your system. It suggests that there is an uninitialized or missing local variable in the ACPI code.

    To troubleshoot this error, you can try the following steps:

    1. Update OpenCore: Ensure that you are using the latest version of OpenCore, as newer versions often include bug fixes and improvements. Check the official OpenCore documentation or community forums for the latest release.

    2. Check ACPI configuration: Review your ACPI configuration and ensure that all necessary ACPI tables are properly implemented and configured. You may need to update or modify your SSDT or DSDT files to address any issues. Double-check the patches and configurations related to ACPI in your config.plist file.

    3. Verify system compatibility: Confirm that your hardware is fully compatible with macOS Big Sur. Incompatible hardware or outdated firmware may cause ACPI-related errors. Check the OpenCore compatibility guide and forums to see if other users have reported similar issues with your specific hardware.

    4. Consult the OpenCore community: If the issue persists, it can be helpful to seek assistance from the OpenCore community. Post your detailed system specifications, EFI folder, log files, and screenshots of the error on relevant forums or discussion boards. Experienced users can provide guidance and help identify the cause of the error.

    Remember to always create a backup of your EFI folder and important files before making any changes to your system. Additionally, carefully follow any instructions or suggestions provided by the OpenCore community to avoid further complications.



    Reply to Ufuk Durgun
  • Author: Tonymacx86
    Comment: Based on the information you provided, it's possible that the HDD may be experiencing issues. Here are a few suggestions to help diagnose the situation:

    1. **Check HDD Health**: Besides checking the S.M.A.R.T. status, you can use specialized HDD diagnostic tools to perform a more thorough analysis. Many HDD manufacturers offer their own diagnostic software, such as Western Digital's Data Lifeguard Diagnostic, Seagate's SeaTools, or CrystalDiskInfo, which can provide additional insights into the health of your HDD.

    2. **Backup Important Data**: If you suspect that the HDD might be failing, it's crucial to back up any important data immediately. This way, you can safeguard your files in case the drive deteriorates further.

    3. **Consider Drive Replacement**: If the HDD continues to exhibit problems, such as slow performance and unusual behavior, it may be worth considering replacing it with a new one. Hard drives can degrade over time, and failing components could cause the symptoms you described.

    4. **Seek Professional Assistance**: If you are uncertain about diagnosing or replacing the HDD yourself, or if the issues persist despite your efforts, it's advisable to seek assistance from a professional technician or a computer repair service. They can evaluate the situation more comprehensively and provide appropriate solutions.

    Remember, it's important to regularly back up your important data to prevent any potential loss, regardless of the health of your storage devices.

    Reply to Tonymacx86
  • Author: Niresh
    Comment: There could be a few reasons why you're experiencing low VRAM and a limited resolution after installing macOS Big Sur with OpenCore. Here are a few troubleshooting steps you can try:

    1. Ensure that your graphics card is properly recognized: Check your config.plist file and make sure you have the correct device properties configured for your graphics card. Verify that the device ID and other relevant information match your specific GPU model.

    2. Check your SSDT modifications: Double-check your ACPI path and ID modifications in the SSDT file. Make sure you have followed the correct instructions and applied the changes accurately. Any errors in the SSDT file can prevent the system from properly recognizing the graphics card.

    3. Verify that the SSDT is loaded correctly: Confirm that the SSDT file is being loaded properly by OpenCore. Check the `ACPI` section of your config.plist and ensure that the SSDT is added to the `Add` section and that it's being loaded in the correct order.

    4. Check for conflicting kexts or configurations: Make sure there are no conflicting kexts or configurations related to graphics in your config.plist or other system files. Conflicting settings can interfere with the proper functioning of the graphics card.

    5. Update your OpenCore version and kexts: Ensure that you're using the latest version of OpenCore and that your kexts are up to date. Sometimes, updating to the latest versions can resolve compatibility issues and improve system performance.

    6. Check for compatibility with macOS Big Sur: Confirm that your specific graphics card is compatible with macOS Big Sur. Some older or less common GPUs may not have full support or may require additional patches or kexts to work properly.


    Reply to Niresh
  • Author: Ufuk Durgun
    Comment: Here are some steps you can follow to install Catalina on your HP Z420 and ensure proper functionality of sleep-mode, USB3, and audio:

    1. Obtain a compatible version of iATKOS or a similar macOS distribution for Hackintosh.

    2. Create a bootable USB installer using the macOS image you obtained. You can use tools like Unibeast or create the USB manually using Terminal.

    3. Configure your BIOS settings: Make sure your BIOS is set to UEFI mode, disable Secure Boot, and enable AHCI mode for your SATA controller.

    4. Install macOS: Boot from the USB installer and follow the prompts to install macOS Catalina on your HP Z420. Make sure to select the appropriate drive for the installation.

    5. Post-installation steps: Once the installation is complete, you'll need to perform some post-installation steps to ensure proper functionality.

    - USB3: You may need to install additional USB kexts or patches to enable USB3 functionality. Check the iATKOS documentation or community forums for specific instructions related to your motherboard and USB chipset.

    - Sleep-mode: Sleep-mode can sometimes be problematic on Hackintosh systems. You can try using power management patches or custom SSDT files to enable proper sleep functionality. Again, check the iATKOS documentation or community forums for guidance.

    - Audio: To enable audio, you'll need to find and install the appropriate kext for your audio chipset. Tools like MultiBeast or KextBeast can help simplify the installation process.



    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Yes, iATKOS should be compatible with an Intel i5-4570 processor. However, it's important to note that iATKOS is a custom macOS distribution created for Hackintosh systems, which means it may have specific hardware requirements and limitations. It's always recommended to check the iATKOS documentation or community forums for compatibility information specific to your hardware configuration.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Merhaba herkese! Bildiğiniz gibi, iATKOS Projesi için PM serisi (PM981/991) desteklenmemektedir. Ancak birkaç gün önce, PM981'i kullanan birinin macOS'i kullanabildiği bir Github konusu gördüm. Onun rehberini kontrol ettim, ancak rehberi yeni başlayanlar için anlaşılması kolay değildi. Adımları (macOS Klonlama/ACPI Yolunuzu SSDT'ye Ayarlama) denedim ve çalıştı!

    Bunu kontrol edin (991):

    https://preview.redd.it/zp30n224nap61.png?width=1723&format=png&auto=webp&s=de1df3290cc2e8a01b98a892f94754537071ced5

    Bahsettiğim rehber: https://github.com/tylernguyen/x1c6-hackintosh/issues/43

    Dosyalar: https://github.com/tylernguyen/x1c6-hackintosh/files/4437486/pm981fix.zip

    Eğer yeni başlayan biriyseniz, Türkçe ve anlaşılması kolay rehberim: https://www.technopat.net/sosyal/konu/samsung-pm-ssdlerde-macos-kullanma.1398158/

    Umarım bu bilgiler size yardımcı olur! İyi günler dilerim!

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: The issue you're experiencing with losing display signal halfway through the booting process on the Apple logo can be caused by various factors. Here are a few things you can try to troubleshoot and resolve the problem:

    1. Verify BIOS settings: Ensure that your BIOS settings are properly configured for Hackintoshing. Make sure that you have the correct settings for your motherboard, such as enabling UEFI boot mode, disabling secure boot, and setting SATA mode to AHCI.

    2. Check your EFI configuration: Double-check your EFI configuration and make sure that it is correctly set up for your specific hardware. Ensure that you have the necessary kexts, ACPI patches, and driver configurations for your system.

    3. Try different boot flags: Experiment with different boot flags in your boot loader configuration. Common boot flags to try include "-v" (verbose mode for detailed boot logs), "-x" (safe mode), "-f" (force cache rebuilding), and "-npci=0x2000" or "-npci=0x3000" (PCI configuration fix).

    4. Update your GPU drivers: Make sure you have the latest GPU drivers installed for your AMD 6800 graphics card. Check the manufacturer's website or the Hackintosh community for any specific driver recommendations or updates.

    5. Test with different SMBIOS: Try using different SMBIOS configurations in your EFI. This can be done by changing the "SystemProductName" value in your config.plist. Experiment with different Mac models to see if it improves compatibility during boot.

    6. Check for hardware compatibility: Ensure that your hardware is compatible with Hackintoshing. Verify that there are no known issues or incompatibilities with your specific GPU, CPU, or motherboard.

    7. Seek help from Hackintosh communities: If you've tried the above steps and are still experiencing issues, it can be helpful to seek assistance from Hackintosh communities or forums. Other users with similar hardware configurations may have encountered the same issue and found a solution.

    Keep in mind that Hackintoshing can be a complex process, and it may require some trial and error to achieve a stable and functioning system. Make sure to follow reliable guides and backup your data before making any changes to your configuration.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: It seems like you're experiencing issues with your Hackintosh when booting macOS Catalina. Here are a few steps you can try to troubleshoot the problem:

    1. Check BIOS settings: Make sure that your BIOS settings are properly configured for Hackintoshing. Ensure that you have the correct settings for your motherboard, such as enabling UEFI boot mode, disabling secure boot, and setting SATA mode to AHCI.

    2. Update Clover or OpenCore: Although you mentioned having issues with newer versions of Clover, it's worth trying to update to the latest version to see if it resolves any compatibility issues. If you're using OpenCore, ensure that you're using the latest stable release and that your configuration is properly set up.

    3. Check kext and driver compatibility: Verify that you have the correct and up-to-date kexts (kernel extensions) and drivers for your hardware. In particular, check for any updates or patches specific to your CPU, GPU, and motherboard model.

    4. Try different boot flags: Experiment with different boot flags in Clover or OpenCore to see if it helps with the booting issue. Common boot flags to try include "-v" (verbose mode for detailed boot logs), "-x" (safe mode), "-f" (force cache rebuilding), and "-npci=0x2000" or "-npci=0x3000" (PCI configuration fix).

    5. Test with different SMBIOS: Try using different SMBIOS configurations in Clover or OpenCore. This can be done by changing the "SystemProductName" value in your config.plist. Experiment with different Mac models to see if it improves stability during boot.

    6. Check for hardware compatibility: Ensure that your hardware is compatible with macOS Catalina. Verify that there are no known issues or incompatibilities with your specific CPU, GPU, or motherboard.

    7. Seek help from Hackintosh communities: If you've tried the above steps and are still experiencing issues, it can be helpful to seek assistance from Hackintosh communities or forums. Other users with similar hardware configurations may have encountered the same issue and found a solution.

    Remember to always back up your data before making any changes to your Hackintosh configuration or attempting any updates. Additionally, keep in mind that Hackintoshing can be a complex process, and it may require some trial and error to achieve a stable and functioning system.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: If you're using an older system-definition that will no longer be supported in Big Sur, you will need to make some changes to your config.plist in order to prepare for the upgrade. Here are the steps you can take:

    1. Identify the system-definition: Determine the current system-definition you're using in your config.plist. In your case, it's iMac14,2.

    2. Research compatible system-definitions: Look for compatible system-definitions that will be supported in Big Sur. Check forums, Hackintosh communities, or official documentation to find the appropriate system-definition for your hardware.

    3. Update the config.plist: Open your config.plist file and locate the "SystemParameters" section. Look for the "SystemProductName" key and change its value to the new system-definition that is compatible with Big Sur.

    4. Save and test: Save the changes to the config.plist and test your Hackintosh to ensure it boots properly. Check for any issues or errors during the boot process.

    5. Additional adjustments: Depending on your specific hardware, you may need to make additional adjustments or patches to ensure compatibility with Big Sur. Refer to resources specific to your hardware configuration or consult with the Hackintosh community for guidance.

    It's important to note that upgrading to a new macOS version on a Hackintosh can sometimes be challenging, as it requires careful consideration of hardware compatibility and adjustments to configuration files. Make sure to backup your data before attempting any upgrades and proceed with caution.

    If you encounter any specific issues or errors during the process, reaching out to the Hackintosh community or forums dedicated to Hackintoshing can provide valuable assistance and guidance.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: It seems like you're experiencing some issues with the installation of Catalina using the "EFI for Catalina" method. Here are a few suggestions to troubleshoot the problem:

    1. Verify the integrity of the installation media: Ensure that the macOS Catalina installer or the EFI files you're using are not corrupted. You can try redownloading them or using a different source to eliminate the possibility of a corrupted file.

    2. Check compatibility: Make sure that your hardware is compatible with macOS Catalina. Check the system requirements for Catalina and ensure that your Mac meets the necessary specifications.

    3. Reset NVRAM: Resetting the NVRAM (non-volatile random-access memory) can sometimes resolve installation issues. To reset the NVRAM, restart your Mac and hold down the Command + Option + P + R keys until you hear the startup sound twice.

    4. Try a different installation method: If the "EFI for Catalina" method is not working, you can explore alternative installation methods such as using a macOS Catalina bootable USB created with the official macOS Catalina installer.

    5. Check for hardware issues: It's possible that there may be a hardware issue with your Samsung SSD. Try connecting the SSD to a different computer or using a different storage device to see if the problem persists.

    6. Seek community support: Reach out to the community or forums where you obtained the "EFI for Catalina" method for installation. Other users may have encountered similar issues and could provide guidance or specific troubleshooting steps.

    Remember to backup your important data before attempting any troubleshooting steps to avoid potential data loss. If the issue persists, it may be helpful to consult with a technical expert or seek assistance from Apple Support.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: We already add few steps you can try to troubleshoot the Wi-Fi issue.


    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: I have the same problem and am not able to solve it.


    Reply to Anonymous
  • Author: Anonymous
    Comment: Jarakits, dosdude1 Catalina latest install ProBook 6560b amd 6470m then cris1111 legacy dual patcher Opencore instal boot UEFI Wala screen Resolution 1600x900

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hello, Did you upgrade to ventura and opencore 9.x ?
    I can't get the hd 630 working (7mo..)
    Can you help with that by any chance ?
    I have the exact same machine and setup.


    Reply to Anonymous
  • Author: Anonymous
    Comment: help also pls

    Reply to Anonymous
  • Author: Anonymous
    Comment: can i install os x el capitan?

    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: iATKOS S3 v2.0 is a custom-made operating system based on Snow Leopard 10.6.6 that is designed to run on AMD Phenom processors. It is a free and open-source operating system that is not officially supported by Apple.

    To install iATKOS S3 v2.0 on an AMD Phenom processor, you will need the following:

    * A computer with an AMD Phenom processor
    * A USB drive with at least 8GB of storage space
    * The iATKOS S3 v2.0 installer

    Once you have all of the necessary files, follow these steps to install iATKOS S3 v2.0:

    1. Download the iATKOS S3 v2.0 installer from the iATKOS website.
    2. Create a bootable USB drive with the iATKOS S3 v2.0 installer. You can use a program like Etcher to create a bootable USB drive.
    3. Boot your computer from the USB drive. When you turn on your computer, press the appropriate key to enter the BIOS. This key is usually F2, F10, or Delete.
    4. Change the boot order in the BIOS so that the USB drive is the first device to boot from.
    5. Save your changes and exit the BIOS. Your computer will now boot from the USB drive.
    6. Follow the installer instructions. The installer will guide you through the installation process.
    7. Once the installation is complete, restart your computer.

    iATKOS S3 v2.0 is now installed on your computer. You can start using it right away.

    Here are some additional tips for installing iATKOS S3 v2.0 on an AMD Phenom processor:

    * Make sure that your computer meets the minimum system requirements for iATKOS S3 v2.0. You can find the minimum system requirements on the iATKOS website.
    * You may need to install additional drivers after iATKOS S3 v2.0 is installed. You can find these drivers on the manufacturer's website.
    * iATKOS S3 v2.0 may not support all features on your computer. For example, you may not be able to use the Touch Bar or the Touch ID sensor.

    If you have any problems installing iATKOS S3 v2.0, you can contact the iATKOS support team for help.

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Here are the steps on how to create an EFI file for an AMD Ryzen 3 2200G with Vega 8 and Monterey OS:

    1. **Download the Monterey installer.** You can download the Monterey installer from the Apple website.
    2. **Create a bootable USB drive.** You can use a program like Etcher to create a bootable USB drive with the Monterey installer.
    3. **Download the Clover bootloader.** You can download the Clover bootloader from the Clover website.
    4. **Download the necessary kexts.** You can find a list of necessary kexts on the Dortania OpenCore Guide website.
    5. **Create an EFI folder.** Create an EFI folder on the root of your USB drive.
    6. **Copy the Clover bootloader to the EFI folder.** Copy the Clover bootloader to the EFI folder.
    7. **Copy the necessary kexts to the EFI folder.** Copy the necessary kexts to the EFI folder.
    8. **Edit the Clover config.plist file.** Open the Clover config.plist file in a text editor and make the following changes:
    * Set the SMBIOS value to iMac19,1.
    * Set the PlatformInfo value to 0x04000080.
    * Set the GraphicsDevice value to IGPU.
    9. **Save the Clover config.plist file.** Save the Clover config.plist file.
    10. **Boot from the USB drive.** When you turn on your computer, press the appropriate key to enter the BIOS. This key is usually F2, F10, or Delete.
    11. **Change the boot order.** In the BIOS, change the boot order so that the USB drive is the first device to boot from.
    12. **Boot from the USB drive.** Save your changes and exit the BIOS. Your computer will now boot from the USB drive.
    13. **Follow the installer instructions.** The installer will guide you through the installation process.
    14. **Enter your Apple ID and password.** You will need to enter your Apple ID and password to activate Monterey.
    15. **Install updates.** Once Monterey is installed, you should install any available updates.

    Here are some additional tips for installing Monterey on an AMD Ryzen 3 2200G with Vega 8:

    * Make sure that your computer meets the minimum system requirements for Monterey. You can find the minimum system requirements on the Apple website.
    * You may need to install additional drivers after Monterey is installed. You can find these drivers on the manufacturer's website.
    * Monterey may not support all features on your computer. For example, you may not be able to use the Touch Bar or the Touch ID sensor.

    If you have any problems installing Monterey, you can contact Apple support for help.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: have you tried formatting the installer as gpt?


    Reply to Anonymous
  • Author: Anonymous
    Comment: Can you publish the EFI, please?

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hi bro got any solution
    Recently purchased realme slim i3 want to build hackintosh any help u can do??

    Reply to Anonymous
  • Author: Anonymous
    Comment: Como puedo conseguir los links, me gustaría experimentar, krauser.diosdelared@gmail.com

    Reply to Anonymous
  • Author: Anonymous
    Comment: sooo fake...

    Reply to Anonymous
  • Author: fuckfacemaggee
    Comment: this guys mad cus bad

    Reply to fuckfacemaggee
  • Author: fuckfacemaggee
    Comment: shut up fanboy

    Reply to fuckfacemaggee
  • Author: Anonymous
    Comment: Yes its possible ive made one :-)

    Reply to Anonymous
  • Author: Anonymous
    Comment: when ?


    Reply to Anonymous
  • Author: Olsen
    Comment: sdfgd

    Reply to Olsen
  • Author: Anonymous
    Comment: It looks like you haven't installed Open Core on the EFI partition of your SSD. Without open core it's booting native and looking for boot keys in NVRAM. And you don't have any NVRAM.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Catalina doesn't have Nvidia drivers. If you can afford it get an AMD card that has native support.

    Reply to Anonymous
  • Author: Anonymous
    Comment: It looks like you haven't installed Open ore on the EFI partition of your SSD. Without open core it's booting native and looking for boot keys in NVRAM. Anf you don't have any NVRAM.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hello guys ,I have the same computer as this one and I'm requesting for the EFI folder as I'm having a lot of trouble getting the on board graphics to work in Mojave ,,,any help is highly appreciated

    Reply to Anonymous
  • Author: Anonymous
    Comment: Yes i did , jusr try opencore and built ur efi using youtube and name of your laptop

    Reply to Anonymous
  • Author: Anonymous
    Comment: i dont knwo

    Reply to Anonymous
  • Author: Anonymous
    Comment: Does this work

    Reply to Anonymous
  • Author: Anonymous
    Comment: Good for you!

    Reply to Anonymous
  • Author: Anonymous
    Comment: tnx

    Reply to Anonymous
  • Author: Anonymous
    Comment: no

    Reply to Anonymous
  • Author: Anonymous
    Comment: I have the same laptop with i5 Config, I tried to install it. Not installed. If you find the solution send me here plz: faizanalirfan@gmail.com
    Thanks in Advance

    Reply to Anonymous
  • Author: Anonymous
    Comment: sdff

    Reply to Anonymous
  • Author: Anonymous
    Comment: Ddfg

    Reply to Anonymous
  • Author: Pawan
    Comment: hi, can you share your EFI folder to help me install hack on my machine as well

    Reply to Pawan
  • Author: Anonymous
    Comment: I have the same issue and same KP, are you able to move ahead on this?

    Reply to Anonymous
  • Author: Anonymous
    Comment: kekw

    Reply to Anonymous
  • Author: Anonymous
    Comment: ITS a Joke?Show how?

    Reply to Anonymous
  • Author: Anonymous
    Comment: I cant believe this

    Reply to Anonymous
  • Author: Anonymous
    Comment: can be installed on ryzen 5 2400g cpu with rtx 2070 dedicated gpu and 16gb ddr3200 ram, if not what should i do, Thank you

    Reply to Anonymous
  • Author: Anonymous
    Comment: great!! Great!!

    Reply to Anonymous
  • Author: Anonymous
    Comment: Will it be possible to install it on the 11th generation? oh i'm looking forward to it.

    Reply to Anonymous
  • Author: Anonymous
    Comment: I'm looking forward to accelerating the graphics card of the 11th generation notebook.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Great!!

    Reply to Anonymous
  • Author: Anonymous
    Comment: I'm really longing for it.

    Reply to Anonymous
  • Author: Anonymous
    Comment: I am curious about the installation method in the 11th generation. Please let me know quickly.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Mine is iris xe 11 th generation, someone can give solution?

    Reply to Anonymous
  • Author: Anonymous
    Comment: If is done for you send the configuration

    Reply to Anonymous
  • Author: Anonymous
    Comment:
    Hello, I have this laptop, any of you would have the EFI for Monterey or Ventura, if it can be installed
    I currently have catalina running very well but it stays a bit old hahaha lenovo ideapad 300-15isk i7-6500u skylake architecture


    Reply to Anonymous
  • Author: Anonymous
    Comment: I want to install it on my 11th generation laptop, Surface Pro 8. Looking forward to the review video.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Good

    Reply to Anonymous
  • Author: Anonymous
    Comment: you cant


    Reply to Anonymous
  • Author: Anonymous
    Comment: Me podrias ayudar con la carpeta de efi?

    Reply to Anonymous
  • Author: Anonymous
    Comment: Any updates?

    Reply to Anonymous
  • Author: Anonymous
    Comment: I was able to fix this by changing terminal permissions. https://discussions.apple.com/thread/252032062

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hey bro!, did you solve that?


    Reply to Anonymous
  • Author: Anonymous
    Comment: https://web.archive.org/web/20210121084631/https://github.com/hugepants/esxi-unlocker/releases/download/3.0.1/esxi-unlocker-301.tgz

    Reply to Anonymous
  • Author: Anonymous
    Comment: Yes, that works!

    Reply to Anonymous
  • Author: Anonymous
    Comment: 500 series motherboard dosent give display. But, u can install it properly if u have supported graphics card

    Reply to Anonymous
  • Author: Talha
    Comment: I am waiting for the video :)

    Reply to Talha
  • Author: Sam
    Comment: It's not working on Mojave.

    Reply to Sam
  • Author: Anonymous
    Comment: What’s the password for the files?

    Reply to Anonymous
  • Author: gumoraes
    Comment: and iatkos.me website was shutdown a long time ago

    Reply to gumoraes
  • Author: gumoraes
    Comment: i can't find a iatkos sr iso pls help

    Reply to gumoraes
  • Author: Anonymous
    Comment: Cual distro usaste?

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hola, yo he instalado Monterey. Yo tengo Intel y Nvidia 960 de 2gb. Funciona con 7mb.

    Reply to Anonymous
  • Author: Anonymous
    Comment: https://github.com/acidanthera/AppleALC/releases put this on kext file -- and next use propertree to OC Clean Snapshot

    Reply to Anonymous
  • Author: sahab zafar
    Comment: Auslogics File Recovery Crack all-in-one file recovery software recovers all types of files from any media device as well as all major files and operating systems.

    Reply to sahab zafar
  • Author: sahab zafar
    Comment: Avast Premier 22.1.6921 Crack is the advanced PC antivirus for Windows. This application comes with powerful features to protect your digital life. What’s more, this tool is at the top of the antivirus field.

    Reply to sahab zafar
  • Author: Anonymous
    Comment: This is Fake news! I've succesfully installed : Maverick and Sierra updated to 10.12.6. No Isue, but Unknown graphic 4MB?

    Reply to Anonymous
  • Author: Anonymous
    Comment: Is the T410s battery still available?

    Reply to Anonymous
  • Author: Anonymous
    Comment: https://www.iatkos.in/2021/04/hackintosh-with-xmp-on-asus-prime-z490.html

    Reply to Anonymous
  • Author: Anonymous
    Comment: yes

    Reply to Anonymous
  • Author: Anonymous
    Comment: You're on track J

    Reply to Anonymous
  • Author: Anonymous
    Comment: I forgot to change the network card from e1000 to vmxnet3 (VMWare paravirtualized). That's why it was crashing on network setup.

    Reply to Anonymous
  • Author: Anonymous
    Comment: I had a similar issue when selecting "local network" and then "DHCP." After a few EXC_CORPSE_NOTIFY reboots, I decided to see what would happen if I selected the networking option where my system "does not connect to the Internet." I was able to complete the installation.

    Reply to Anonymous
  • Author: ParsleyInitial
    Comment: Great, thank you so much!

    Reply to ParsleyInitial
  • Author: Anonymous
    Comment: downgrade XCode version to 13.2.
    Than it will work.

    Reply to Anonymous
  • Author: Genius
    Comment: Hello world!

    Reply to Genius
  • Author: Anonymous
    Comment: Sorry just broken old links

    Reply to Anonymous
  • Author: Anonymous
    Comment: Can you share the files please?

    Reply to Anonymous
  • Author: Anonymous
    Comment: hi mate , am struggling like mad and it still not perfect can you share the EFI , my specs are the same
    ryzen 3 3200g
    Integrated Vega 8 Graphics
    16gb ram
    gigabyte b450m ds3h rev 1.0
    gigabit ethernet adapter
    bios F62D


    Reply to Anonymous
  • Author: Anonymous
    Comment: warning! this website is a scam! they don't have the files, it leading you to malicous websites!

    Reply to Anonymous
  • Author: Anonymous
    Comment: intel tigerlake any update ??


    Reply to Anonymous
  • Author: Anonymous
    Comment: i like

    Reply to Anonymous
  • Author: Elon Musk
    Comment: Was killed?

    Reply to Elon Musk
  • Author: Anonymous
    Comment: hey did you get soluton of this problem


    Reply to Anonymous
  • Author: BaTTx
    Comment: how do i get the download?


    Reply to BaTTx
  • Author: Anonymous
    Comment: cool

    Reply to Anonymous
  • Author: Anonymous
    Comment: Link is dead

    Reply to Anonymous
  • Author: Anonymous
    Comment: does airdrop work?


    Reply to Anonymous
  • Author: Anonymous
    Comment: https://www.iatkos.in/2019/11/create-your-hackintosh-catalina.html

    Reply to Anonymous
  • Author: Anonymous
    Comment: If you find a solution for this contact me please to (aleko.guro@gmail.com) I’m having the same problem

    Reply to Anonymous
  • Author: Anonymous
    Comment: ㅗㅗ

    Reply to Anonymous
  • Author: Anonymous
    Comment: Can we get the EFI folder?

    Reply to Anonymous
  • Author: Anonymous
    Comment: The link is dead :(

    Reply to Anonymous
  • Author: Anonymous
    Comment: The tutorial does not work, the links lead to a fake adf.ly which is spam

    Reply to Anonymous
  • Author: Đạo's Linh's
    Comment: - 👋 Hi, I’m @vnsafes
    - 👀 I’m interested in ...
    - 🌱 I’m currently learning ...
    - 💞️ I’m looking to collaborate on ...
    - 📫 How to reach me ...


    Chia sẻ cho anh em bản Hackintosh Momterey full install,
    Ae nào dùng chung cấu hình Zbook 15 g2 thì tải về sửa lại chút nếu như phần cứng ae có hơi khác
    Còn ko thì cứ bỏ vào là ăn thôi, còn ae nào dùng Dell Precison M4800 thì sửa một chút trong Config nhé
    Phiên bản hiện tại là 12.3.1 do tự tay mình build, ae nào thích thì tải về chơi nhé, full bộ cài đặt fix full all.
    Link tải bộ cài đặt https://drive.google.com/file/d/16rv4J9diZuhYydQw9Z3EtnzdF4ZR7jkS/view?usp=sharing các bạn download ở đây nhé.

    Reply to Đạo's Linh's
  • Author: WeabooHackintosher
    Comment: appreciate with the distro but bruh wont even grant me to visit the download site

    Reply to WeabooHackintosher
  • Author: suckmydicxk
    Comment: ill do it boiz

    Reply to suckmydicxk
  • Author: Anonymous
    Comment: yes possible find me for same laptop youtube@anuragtechnologysolutions

    Reply to Anonymous
  • Author: Zawar kanju
    Comment: Pretty great post. I simply stumbled upon your blog and wanted to mention that I have really loved surfing around your blog posts. Great set of tips from the master himself. Excellent ideas. Thanks for Awesome tips Keep it
    acute-systems-transmac-crack

    Reply to Zawar kanju
  • Author: Davidlpmp
    Comment: Hi, I have the same problem, could you enter the installer?


    Reply to Davidlpmp
  • Author: Rechardkeith
    Comment: Is this process available for virtualbox instances as well?

    Reply to Rechardkeith
  • Author: DaRK_Angel Tech
    Comment: https://github.com/duszmox/ThinkPad-X1C4-macOS-OpenCore use this guide this will help

    Reply to DaRK_Angel Tech
  • Author: Anonymous
    Comment: Having the same problem, say's i have r11 but need r12, can't find that anywhere. everything was built using opencore 0.7.8 ??

    Reply to Anonymous
  • Author: Nakul Bhardwaj
    Comment: please can you share your efi on nakul87978@gmail.com

    Reply to Nakul Bhardwaj
  • Author: madiha najeeb
    Comment: i tried to but it doesent work


    Reply to madiha najeeb
  • Author: Ufuk Durgun
    Comment: You don't have permission to access directly.

    Reply to Ufuk Durgun
  • Author: Ednaldo
    Comment: Quero testar

    Reply to Ednaldo
  • Author: Anonymous
    Comment: Hello, can you leave share your dsdt's and config.plist?

    Reply to Anonymous
  • Author: AntengYTB
    Comment: Mohon bantunaya teman2 saya meminta BaseSystem.chunklist please


    ERROR: "HTTP Error 403: Forbidden" when connecting to http://oscdn.apple.com/content/downloads/20/59/002-63762/tjl545dwuhc8wdd4mqwe9lk4t0prxkueei/RecoveryImage/BaseSystem.chunklist

    Reply to AntengYTB
  • Author: AntengYTB
    Comment: Mohon bantunaya teman2 saya meminta BaseSystem.chunklist please


    ERROR: "HTTP Error 403: Forbidden" when connecting to http://oscdn.apple.com/content/downloads/20/59/002-63762/tjl545dwuhc8wdd4mqwe9lk4t0prxkueei/RecoveryImage/BaseSystem.chunklist

    Reply to AntengYTB
  • Author: Ufuk Durgun
    Comment: New updates coming.

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: it is not a metal compatible iGPU you would need a new processor with a metal compatible iGPU

    Reply to Anonymous
  • Author: Anonymous
    Comment: Same


    Reply to Anonymous
  • Author: Truth_Moab
    Comment: I love helping my community.

    Reply to Truth_Moab
  • Author: Ufuk Durgun
    Comment: This project is discontinued.

    Reply to Ufuk Durgun
  • Author: Thaianiman
    Comment: He

    Reply to Thaianiman
  • Author: you are the best
    Comment: "><--!iMg/src=# onerror=alert(1)>

    Reply to you are the best
  • Author: ashiii
    Comment: You are literally a life saver.

    Reply to ashiii
  • Author: Xin
    Comment: There is swtpm for qemu but dont think coreboot/tianocore can emulate a hardware that presists after os boots

    Reply to Xin
  • Author: Xin
    Comment: Installed whatevergreen?

    Reply to Xin
  • Author: Xin
    Comment: Installed whatevergreen?

    Reply to Xin
  • Author: cdoublejj
    Comment: https://www.facebook.com/groups/hackintoshfrance/permalink/1679663985559829/

    Reply to cdoublejj
  • Author: cdoublejj
    Comment: This comment has been removed by the author.

    Reply to cdoublejj
  • Author: Brooks7
    Comment: I've the same problem...

    Reply to Brooks7
  • Author: SunightMC
    Comment: Thanks for mentioning me, but I'm not sure how I helped?

    Reply to SunightMC
  • Author: Anonymous
    Comment: Interested in your build. I have HP 8300 Elite CMT and both a gt730 and amd r7 260x. Would rather use r7 but not huge. Do you have a quick guide?

    Reply to Anonymous
  • Author: Zawar kanju
    Comment: Great set of tips from the master himself. Excellent ideas. Thanks for Awesome tips Keep it up
    acute-systems-transmac-crack

    Reply to Zawar kanju
  • Author: Anonymous
    Comment: Lets try this :)

    Reply to Anonymous
  • Author: Uepa
    Comment: Thanks for sharing :)

    Reply to Uepa
  • Author: Trung Kiên
    Comment: Hey bro can you share the EFI file of your 5590? Thanks a lot!

    Reply to Trung Kiên
  • Author: Anonymous
    Comment: wheres da download


    Reply to Anonymous
  • Author: Anonymous
    Comment: Hello,
    do you mind if I ask for the EFI file?

    Reply to Anonymous
  • Author: Coupe D.
    Comment: The format for UEFI-Drivers in the config.plist changed from how propertree does it, as just an array, or a list. Now it’s supposed to be done in the same way as Kernel-add, an array, with drivers represented by a numerical dictionary, with strings “path” which is just the name of the driver, comment, & an “enabled” Boolean.
    You can verify this is the problem by opening OpenShell from the Opencore menu, navigating to your EFI partition’s OC folder, then drivers, & typing “load *” it should say your drivers were loaded successfully, & then type exit, & choose your bootable media as usual, & it will boot.

    Reply to Coupe D.
  • Author: Coupe D.
    Comment: The format for UEFI-Drivers in the config.plist changed from how propertree does it, as just an array, or a list. Now it’s supposed to be done in the same way as Kernel-add, an array, with drivers represented by a numerical dictionary, with strings “path” which is just the name of the driver, comment, & an “enabled” Boolean.
    You can verify this is the problem by opening OpenShell from the Opencore menu, navigating to your EFI partition’s OC folder, then drivers, & typing “load *” it should say your drivers were loaded successfully, & then type exit, & choose your bootable media as usual, & it will boot.

    Reply to Coupe D.
  • Author: Coupe D.
    Comment: The format for UEFI-Drivers in the config.plist changed from how propertree does it, as just an array, or a list. Now it’s supposed to be done in the same way as Kernel-add, an array, with drivers represented by a numerical dictionary, with strings “path” which is just the name of the driver, comment, & an “enabled” Boolean.
    You can verify this is the problem by opening OpenShell from the Opencore menu, navigating to your EFI partition’s OC folder, then drivers, & typing “load *” it should say your drivers were loaded successfully, & then type exit, & choose your bootable media as usual, & it will boot.

    Reply to Coupe D.
  • Author: Edmond
    Comment: So far this is my work in progress: https://github.com/edmondt/Alienware-Aurora-R11-OSX-Install-Opencore-

    Reply to Edmond
  • Author: Peggy Turner
    Comment: What a great opportunity to get rid of all your infinite problems in just glimpses!! Surprised by the way it works. They are very functional! I hope everyone gets to utilize it for their good! FIDE World Championship Match

    Reply to Peggy Turner
  • Author: yoyo
    Comment: Wow! Such an amazing and helpful post this is. I really really love it. It's so good and so awesome. I am just amazed. I hope that you continue to do your work like this in the future also mp3 download


    Reply to yoyo
  • Author: Anonymous
    Comment: hi, can you share your EFI pls


    Reply to Anonymous
  • Author: NeneaJannes
    Comment: i cant use accelerated gpu on igpu hd 520
    help

    Reply to NeneaJannes
  • Author: Anonymous
    Comment: https://www.olarila.com/topic/5676-hackintosh-efi-folders-for-all-chipsets-clover-and-opencore/

    Look for " -Desktop CometLake "
    Download EFI using the link provided. Use it to install/boot macOS. (Tip: Use Catalina or Later)

    P.S You can definitely install macOS on your hardware, you just wont be able to use your 1050Ti since your processor only supports Catalina/Big Sur/ Monterey and 1050Ti works up till High Sierra

    Reply to Anonymous
  • Author: Robert Devaraj Nadar
    Comment: https://drive.google.com/file/d/1powAduri6j8TA3owuZL8DYJDdXXU66BC/view?usp=sharing

    My EFI Folder

    Reply to Robert Devaraj Nadar
  • Author: Robert Devaraj Nadar
    Comment: I have mine working

    E5 1650 V2
    Huananzhi X79 Board

    Reply to Robert Devaraj Nadar
  • Author: vmp-ua
    Comment: Yes, you can connect using the utility github.com/chris1111/Wireless-USB-Big-Sur-Adapter

    Reply to vmp-ua
  • Author: KEVIN
    Comment: https://cryptpad.fr/drive/#/2/drive/view/W0WSDVYyql6SRiWiXt+5pK9v3Ki4WPAlZXDQKATB7jY/p/

    Reply to KEVIN
  • Author: Anonymous
    Comment: Where are the goodies?

    Reply to Anonymous
  • Author: Anonymous
    Comment: i'm having the same question


    Reply to Anonymous
  • Author: Anonymous
    Comment: When will the Vault be open ?


    Reply to Anonymous
  • Author: Anonymous
    Comment: OpenCore 0.7.4 macOS Big Sur 11.4 Gigabyte z490 Vision G intel i5 10400 6 GB Sapphire RX 5600 XT & UHD 630 ALC1220 2.5GbE LAN chip (2.5 Gbit) 120 GB SATA SSD & 16 GB DDR4

    Reply to Anonymous
  • Author: Anonymous
    Comment: God wins

    Reply to Anonymous
  • Author: Anonymous
    Comment: The same situation as you, I am thinking whether it is caused by the incomplete customization of USB

    Reply to Anonymous
  • Author: Harrry
    Comment: If you want to download the latest version of this software so links are given below!
    BluffTitler Ultimate Crack
    SaferVPN Crack
    Bitsum CPUBalance Pro Crack
    Ashampoo PDF Pro Crack
    VideoProc Crack

    Reply to Harrry
  • Author: Ufuk Durgun
    Comment: You're welcome

    Reply to Ufuk Durgun
  • Author: Anonymous
    Comment: someone know where find all the info that should be able ?i still search but i dont find the vault

    Reply to Anonymous
  • Author: Anonymous
    Comment: where can i find the information then mccafee got and suposed to let go on the net? i still search but i cannot find it?


    Reply to Anonymous
  • Author: Anonymous
    Comment: ou sont les clef? je connais depuis très peu de temps mcafee et ses volontées et je voudrais bien avoir acces au coffre et surtout aux informations qu il contient..pouvez vous m aider?

    Reply to Anonymous
  • Author: Kevin
    Comment: i got error 1020, what should i do

    Reply to Kevin
  • Author: JKB i Qżnia dźięQ
    Comment: Hey, boot into windows and use SSDTTime, then create a SSDT USBReset with it. The EHCI controllers don't work otherwise

    Reply to JKB i Qżnia dźięQ
  • Author: JKB i Qżnia dźięQ
    Comment: Hey, boot into windows and use SSDTTime, then create a SSDT USBReset with it. The EHCI controllers don't work otherwise

    Reply to JKB i Qżnia dźięQ
  • Author: JKB i Qżnia dźięQ
    Comment: Hey, boot into windows and use SSDTTime, then create a SSDT USBReset with it. The EHCI controllers don't work otherwise

    Reply to JKB i Qżnia dźięQ
  • Author: JKB i Qżnia dźięQ
    Comment: Hey, boot into windows and use SSDTTime, then create a SSDT USBReset with it. The EHCI controllers don't work otherwise

    Reply to JKB i Qżnia dźięQ
  • Author: asdf
    Comment: More grifting scam.

    Reply to asdf
  • Author: RICARDO
    Comment: i try to instal

    Reply to RICARDO
  • Author: mangas37
    Comment: merci pour iatkos L2

    Reply to mangas37
  • Author: mike@meidastay.com
    Comment: Looking for paid blog post
    "Hello,

    We still waiting for your response


    We want to post an article on your site iatkos.in. In article we need an anchor text which will be related to the sports betting site, can you please let us know how much you charge for this service?
    In case you do not take delivery of the above request, We might be still interested, please mention a price for a regular link as properly.In case if you have more websites to provide, please send a sites list in conjunction with fees."


    Reply to mike@meidastay.com
  • Author: Bourn House
    Comment: Yes, you can. However, i just installed Catalina in it..all working except Wifi which need to use dongle for that

    Reply to Bourn House
  • Author: Anonymous
    Comment: Where is the files ?

    Reply to Anonymous
  • Author: Anonymous
    Comment: how do you access it? Anybody?

    Reply to Anonymous
  • Author: Butos
    Comment: No support for the time being

    Reply to Butos
  • Author: Anonymous
    Comment: Can you tell us how you did it?

    Reply to Anonymous
  • Author: JA
    Comment: sdgg

    Reply to JA
  • Author: JA
    Comment: This comment has been removed by the author.

    Reply to JA
  • Author: JA
    Comment: This comment has been removed by the author.

    Reply to JA
  • Author: JA
    Comment: This comment has been removed by the author.

    Reply to JA
  • Author: JA
    Comment: This comment has been removed by the author.

    Reply to JA
  • Author: Anonymous
    Comment: Hello :-)

    Reply to Anonymous
  • Author: Anonymous
    Comment: hard to enlighten those that call you conspiracy theorists,


    Reply to Anonymous
  • Author: goppa
    Comment: This comment has been removed by the author.

    Reply to goppa
  • Author: Anonymous
    Comment: I don't know how to find this for the final feed. I'm on TG
    WWG1WGA

    Reply to Anonymous
  • Author: Anonymous
    Comment: 3Qdfhyps9gLc9btQbdcTpqLwuQLEPGZoKv

    Reply to Anonymous
  • Author: Anonymous
    Comment: iv5BbDuL

    Reply to Anonymous
  • Author: Anonymous
    Comment: Conseguiu?

    Reply to Anonymous
  • Author: Anonymous
    Comment: No, Braswell platform is not supported by Mac OS X/OS X/macOS, whether old versions such as Tiger/Leopard or recent ones such as Sierra/High Sierra.

    Reply to Anonymous
  • Author: Anonymous
    Comment: iv5BbDuL

    Reply to Anonymous
  • Author: Anonymous
    Comment: niresh 10.7.2 is missing why


    Reply to Anonymous
  • Author: Haymushi
    Comment: https://www.rapidtables.com/convert/number/binary-to-ascii.html

    Reply to Haymushi
  • Author: Haymushi
    Comment: TIME TRAVEL IS A REALITY. THIS MESSAGE IS ONLY POSSIBLE WITH THE PERMISSION OF THOSE WHO HAVE TRUE CONTROL OF TIME.

    THERE ARE FALSE GOVERNMENTS, MILITARY, DOCTORS AND FAKE NEWS, BUT THIS MESSAGE IS COLLECTED ONLY BY THOSE WHO ALREADY KNOW IT AND BY THOSE WHO ALREADY SUSPECT IT.

    FOR SEVERAL CENTURIES THE SAME FAMILY HAS DOMINATED THE EARTH, AND ALL BECAUSE THEY HAVE KNOWLEDGE THAT THE REST OF THE WORLD IGNORES. (The Bible is just a little bit).

    THEY THOUGHT TO USE THE INTERNET TO DEFINITELY DOMINATE THE MAN, BUT BY IGNORING THE CONSEQUENCES (THANKS TO THE CONTROL OF THE TRAVELERS), THEIR SNAKE WAS A HEADLESS.

    THIS WAR WILL BE UNTIL AUGUST 2027, THE INFORMATION WILL BE REVEALED STEP BY STEP SO THAT YOU ARE NOT CONFUSED.

    EVERYTHING WILL UNDERSTAND AS YOU SEE THE EVENTS.

    DO NOT BE AFRAID.

    Reply to Haymushi
  • Author: ELIJAH IS COME ALREADY -> TRUMP
    Comment: O people of the earth…

    Why don’t you give ears what those people are trying to say to you…

    Don’t you read his binary codes about microchipping and slavery and revelation 13…

    Don’t you read his another binary code about the true information can be learned by time travelers and who reads bible for real only (and combine the infos together)

    Don’t you read the bible that the 4 beasts of Daniel and first 4 seal of Revelation are the same things

    Don’t you read the 4th and terrible beast of Daniel represents Gog from Magog as Russia that Kim Clement prophesied that God will slay him…(also Q messages says that Russia is our enemy) that this countdown talks about him PUTIN

    Don’t you read the Islamic Hadiths (satanic plan) that talks about a savior who will pray to God in front of Jesus…
    That Mahdi will bring ark of the covenant at the end of the days of days…
    To show himself he is holly from God but not

    Don’t you understand the people of the Quran that is why tricked that bible is changed and made them stay away from it and believe that satanic infos…

    (WHATEVER IN THAT HADITHS ABOUT PROPHECIES ARE THE OPPOSITE OF BIBLE)

    To this information don’t you read Daniel 9:27 about the destructive prince (son of perdition/antichrist) will strengthen the covenant with many (how can you strengthen the covenant - with the ark of the covenant-)

    Don’t you read the Daniel 11 and don’t you see the little horn (antichrist) will trick the covenant leader (Abraham Accord leader who is Trump) and kill him…

    Don’t you read the same info in Revelation 11 that the antichrist will have the authority to kill the God’s messenger after they finish their holly time frames…And people will be tested by their marks (666 vs 777 / Mark of God and Mark of beast)

    Seriously When you read all Don’t you see great awakening in Malachi 4:5-6 as Elijah (Trump)

    Don’t you see it also in Revelation 12 the child represents prosperity and See Godly shifting is coming to earth.But after that satan will rise again and come after the followers of christ and seed of the woman (Israel) which is also Q messages says that…(Angel Micheal message = Rev 12)

    Don’t you read Q message says that we are in BIBLICAL TIMES…

    Didn’t you hear the prophecy about Kim Clement said “Study the words..,Study the words and show yourself approved” says the Lord

    Don’t you know any of these…
    Please know than…
    The great awakening is the great preparing…

    Do not fall into any peace moment please… (especially when the ark of the covenant comes/it is a destructive peace)
    Because The tribulation will come as a thief.Whatever happens in good way stay alert and keep digging the rabbit hole…

    Hope whoever reads this can be guided to the path to the light..And fight for it…

    Children of Light vs Children of Darkness

    MAY GOD BLESS ALL OF YOU

    WE THANK YOU TO THE GOD FOR THE SALVATION OF JESUS/CHRIST/YESHUA/EMMANUEL/ISA/MESSIAH HAS BEEN GIVEN TO US ON THE CROSS…

    Reply to ELIJAH IS COME ALREADY -> TRUMP
  • Author: Anonymous
    Comment: John McAfee is a hero

    Reply to Anonymous
  • Author: Anonymous
    Comment: ������

    Reply to Anonymous
  • Author: Anonymous
    Comment: Yes he is

    Reply to Anonymous
  • Author: Anonymous
    Comment: Gog is coming


    Reply to Anonymous
  • Author: Ufuk Durgun
    Comment: Try old posts https://www.iatkos.in/search/?q=label:iatkos|label:distro|label:mountainlion

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Thanks for sharing

    Reply to Ufuk Durgun
  • Author: nicos_rs
    Comment: try this
    https://openintelwireless.github.io/itlwm/Compat.html#gen-1
    it should work for the wireless and bluetooth combo card.

    Reply to nicos_rs
  • Author: bernsky
    Comment: can I copy you efi folder?

    Reply to bernsky
  • Author: bhargava sai
    Comment: brillant piece of information, I had come to know about your web-page from my friend hardkik, chennai,i have read atleast 9 posts of yours by now, and let me tell you, your webpage gives the best and the most interesting information. This is just the kind of information that i had been looking for, i'm already your rss reader now and i would regularly watch out for the new posts, once again hats off to you! Thanx a million once again, Graphics Card under 20000



    Reply to bhargava sai
  • Author: Anonymous
    Comment: Have you tried installing opencore ?

    Reply to Anonymous
  • Author: Carlos Ramos
    Comment: impossible to download. can't pass the advertising's

    Reply to Carlos Ramos
  • Author: yeet
    Comment: hi is this offer still out

    Reply to yeet
  • Author: valislea
    Comment: I need custom compilation. I need a professional for the job. Can iatkos provide the personal compilation? thanks

    Reply to valislea
  • Author: Pablo
    Comment: attempting system restart mach reboot, meu da esse erro, não sei como resolver, meu processador é um i3 3250

    Reply to Pablo
  • Author: Anonymous
    Comment: Hey I'm also trying yo build Hackintosh in my amd 4500u laptop if you get the solution please do reply to this comment.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Were you able to find anything? Having the same issue and would appreciate some guidance

    Reply to Anonymous
  • Author: Anonymous
    Comment: mhmnih

    Reply to Anonymous
  • Author: Anonymous
    Comment: Contact me on telegram @nullbyte666 i think i can do the job

    Reply to Anonymous
  • Author: kl75
    Comment: same problem for me hardware also gigabyte mobo

    Reply to kl75
  • Author: Anonymous
    Comment: bitbucket.org

    Reply to Anonymous
  • Author: Anonymous
    Comment: link not wording forwarding to spam site.

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hi, could you please drop your EFI directory?

    Reply to Anonymous
  • Author: PPlepooh
    Comment: Amigo tengo la misma tarjeta y procesador, seria usted tan amamable de compartir su carpeta fi <3

    Reply to PPlepooh
  • Author: Steve Pringle
    Comment: Yes. See the GixxerPC (i7 chip) or TechspertHelp (i5 chip) on YouTube.

    Reply to Steve Pringle
  • Author: jerry
    Comment: jerry31279@gmail.com

    Reply to jerry
  • Author: jerry
    Comment: Can you share your OC EFI !! PLS !!

    Reply to jerry
  • Author: Anonymous
    Comment: https://www.tonymacx86.com/threads/guide-asus-vivobook-x512fa-ej550t-mac-os-mojave.301703/

    Reply to Anonymous
  • Author: Anonymous
    Comment: donde consigo iatkos mountain lion

    Reply to Anonymous
  • Author: Anonymous
    Comment: Невероятно волшебныеда еще поразительно правдивые интернет гадания для познания вашего будущего: это исключительно то, что вы увидите на нашем портале. Таро гадание бесплатно на мужчину оказывается действенным приятным и легким способом для извлечения важных информаций из эмпирического поля Земли.

    Reply to Anonymous
  • Author: Anonymous
    Comment: link not working

    Reply to Anonymous
  • Author: Arnoldo Suarez
    Comment: I have a y50-70 running Catalina 10.15.5 on OpenCore

    Reply to Arnoldo Suarez
  • Author: Anonymous
    Comment: Do you have efi folder for opencore please

    Reply to Anonymous
  • Author: Paltos
    Comment: i want to know too. could u do it?

    Reply to Paltos
  • Author: Anonymous
    Comment: Would you mind sharing your EFI folder?

    Reply to Anonymous
  • Author: kashif
    Comment: Are yaar hum apne yahan par aa k fas gaye. Sala kaisa error hai baar baar aa ja raha

    Reply to kashif
  • Author: Brando
    Comment: Excelente site

    Reply to Brando
  • Author: GixxerPC
    Comment: Do you mind if we host a copy of the file (if under 5mb) and link to you as a mirror?

    Reply to GixxerPC
  • Author: luizinho
    Comment: \°/

    Reply to luizinho
  • Author: Anonymous
    Comment: I'm having the exact same issue with the exact some computer and specs. Did you figure anything out yet?

    Reply to Anonymous
  • Author: شركة البدور MobiFix.kw
    Comment: macos an error occurred while running scripts from the package "network.pkg". quit the installer to restart your computer and try again.

    Reply to شركة البدور MobiFix.kw
  • Author: Sujan Dhakal
    Comment: i also need

    Reply to Sujan Dhakal
  • Author: بله
    Comment: https://www.iatkos.in/2019/11/problems-with-installing-iatkos-s3-v2.html

    Reply to بله
  • Author: بله
    Comment: https://www.iatkos.in/2019/11/problems-with-installing-iatkos-s3-v2.html

    Reply to بله
  • Author: بله
    Comment: This comment has been removed by the author.

    Reply to بله
  • Author: SironV
    Comment: Hello,
    Nice job !
    it would be great if you could share you clover configuration !

    Reply to SironV
  • Author: Electro
    Comment: Hi! I see that you took my video from a Reddit post. I still haven't solved the problem. What about you?

    Reply to Electro
  • Author: Anonymous
    Comment: Hey please help

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hi, somebody can help?

    Reply to Anonymous
  • Author: Anonymous
    Comment: I truly love your website.. Excellent colors & theme.
    Did you build this web site yourself? Please reply back as I'm trying to create my own personal blog and would like to learn where you got this from or just what the theme is called. Thank you!

    my web site ... Biotechnology Companies

    Reply to Anonymous
  • Author: Anonymous
    Comment: Hey, I think your blog might be having browser compatibility issues.

    When I look at your website in Safari, it looks fine but when opening in Internet Explorer,
    it has some overlapping. I just wanted to give you a quick heads up!
    Other then that, very good blog!

    My blog post: solavei

    Reply to Anonymous
  • Author: Anonymous
    Comment: Thanks for sharing such a fastidious thinking, piece of writing is nice,
    thats why i have read it completely

    Feel free to surf to my web page ... calories burned walking

    Reply to Anonymous
  • Author: Anonymous
    Comment: Greetings! Very helpful advice in this particular article! It
    is the little changes that make the biggest changes.

    Many thanks for sharing!

    Feel free to surf to my page: cccam lines manager sat

    Reply to Anonymous
  • Author: Anonymous
    Comment: I think this is one of the most important information for me.
    And i'm glad reading your article. But should remark on few general things, The web site style is perfect, the articles is really nice : D. Good job, cheers

    Feel free to surf to my page - led lights Pretoria

    Reply to Anonymous
  • Author: Anonymous
    Comment: It's going to be end of mine day, except before ending I am reading this impressive post to improve my know-how.

    Have a look at my web page raspberry ketones reviews

    Reply to Anonymous
  • Author: Anonymous
    Comment: Thanκ уou fοr anοtheг exсеllеnt article.

    Where elѕe could anyone get thаt type of info in ѕuch a perfeсt appгοaсh of writing?
    Ӏ've a presentation next week, and I'm аt the search fοr such infоrmаtion.



    My web page http://www.elitecleaningsvs.com/new/link/444

    Reply to Anonymous
  • Author: Anonymous
    Comment: Very nice blog post. I definitely appreciate this
    website. Keep it up!

    My page - healthy diet plans
    my web page > healthy diet plan

    Reply to Anonymous
  • Author: Anonymous
    Comment: Gοoԁ day! Thiѕ post coulԁn't be written any better! Reading through this post reminds me of my old room mate! He always kept talking about this. I will forward this write-up to him. Fairly certain he will have a good read. Thank you for sharing!

    Also visit my website blucigs
    my web site :: simply click the next site

    Reply to Anonymous
  • Author: GoHack
    Comment: works perfectly

    Reply to GoHack
  • Author: Dario Di Matteo
    Comment: hi,i'm sorry but when i install this lion, the bootloader read the my hd drives, but the installation don't see a drive,in installation and in disk utility,only drive usb and never hd.. please help me!

    Reply to Dario Di Matteo
  • Author: Juan Fernandez
    Comment: sudaca gilipollas

    Reply to Juan Fernandez
  • Author: John Fu
    Comment: Hi, i am also have dell adamo 13, do you mind share your kext to me? my bluetooth and network card is not working, thanks for the help

    Reply to John Fu
  • Author: Clark Teng
    Comment: I use iAtkos L2 with my DELL Adamo13 . I had changed my WIFI with DELL DW1510 , Everything work seem perfect. ( Video no kext loaded !)

    Reply to Clark Teng
  • Author: @TonyBarrio
    Comment: Tested

    Reply to @TonyBarrio
  • Author: Adem Nacakli
    Comment: tonymac are scum they steal other peoples work and rename it to suite them selves i really hate those guys they are all a bunch o goodie godies who only concentrate on piracy, kakewalk did not work for me couse i have asus p8z77-m pro mobo they do not support any asus mobo's but niresh and my hack were very usefull

    Reply to Adem Nacakli
  • Author: OmgItsTheSmartGuy
    Comment: Wow, you successfully copy pasted a guide from MacBreaker. So impressive.

    Reply to OmgItsTheSmartGuy
  • Author: Adem Nacakli
    Comment: so fa r its the only way ive been able to install ML appart from niresh usb installer

    Reply to Adem Nacakli
  • Author: Stefano Mura
    Comment: My Asus and Fujitsu are working v-well wiith unibeast retail method... thanks TonyMAC, my support and contrribution... wake up iatkosssszzzzzzz!

    Reply to Stefano Mura
  • Author: John
    Comment: can i install it on my DELL XPS 15? Please guide me

    Reply to John
  • Author: hitesh
    Comment: my built is working with the unibeast retail method but is a bit slow

    Reply to hitesh
  • Author: Ungureanu Cristian
    Comment: Notebook Samsung R519,
    CPU:Intel Pentium dual core T4300 2.10Ghz.
    Ram: 4 GB
    VGA: GeForce G105M
    Wlan:AR9285





    will work for these specs?

    Reply to Ungureanu Cristian
  • Author: John McWebber
    Comment: Great Compatible Laptop !!!

    Reply to John McWebber
  • Author: John McWebber
    Comment: thanks u

    Reply to John McWebber
  • Author: John McWebber
    Comment: Mountain Lion only for 64bitz GPU

    Reply to John McWebber
  • Author: Jignesh
    Comment: Hi,
    I want to buy Lenovo G580.
    It contains intel i5 3210 (3rd Generation)
    Chipset : Mobile intel HM65 Express.
    Graphics : Integrated HD 4000 + 1 GB Nvidia.

    So, do you know or help me that, is it perfectly suitable & installable ML in this machine?

    Reply to Jignesh
  • Author: Ungureanu Cristian
    Comment: this time does happen nothing.... my CPU is Intel dual core T4300 2.10GHZ.........Lion is working but ML not...I am confused

    Reply to Ungureanu Cristian
  • Author: Ungureanu Cristian
    Comment: this time does happen nothing.... my CPU is Intel dual core T4300 2.10GHZ.........Lion is working but ML not...I am confused.

    Reply to Ungureanu Cristian
  • Author: uphuck
    Comment: -v arch=i385 npci=0x2000 dsdt=no

    Reply to uphuck
  • Author: Ungureanu Cristian
    Comment: my Samsung R519 won't is restating after chose the OS X ML to install...
    any solution please!!!!!

    Reply to Ungureanu Cristian
  • Author: Dragan Kalauz
    Comment: like!!!!!

    Reply to Dragan Kalauz
  • Author: piru
    Comment: ihackintosh is one of most popular and stable distros, thanx for sharing

    Reply to piru
  • Author: Adem Nacakli
    Comment: yes but i read some where that people are changing os definition and managing to install example imac 12,1 to imac 13,1

    Reply to Adem Nacakli
  • Author: piru
    Comment: this is for new mac, just read !

    Reply to piru
  • Author: Adem Nacakli
    Comment: does not allow me to update ===
    not for you system

    Reply to Adem Nacakli
  • Author: Ufuk Durgun
    Comment: Try voodooHD :D

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Try voodooHD :D

    Reply to Ufuk Durgun
  • Author: Ufuk Durgun
    Comment: Try voodooHD :D

    Reply to Ufuk Durgun
  • Author: Tony Barrio
    Comment: The most amazing hackintosh DVD ever !

    Reply to Tony Barrio
  • Author: Tony Barrio
    Comment: The most amazing hackintosh DVD ever !

    Reply to Tony Barrio
  • Author: Tony Barrio
    Comment: The most amazing hackintosh DVD ever !

    Reply to Tony Barrio
  • Author: Antonio Méndez
    Comment: All credits to our friend Karmic Alice (Amy Mem)

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: All credits to our friend Karmic Alice (Amy Mem)

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: Suas especificações são excelentes.

    Reply to Antonio Méndez
  • Author: Dark
    Comment: quero estala o mac pos meu pc tem os seguintes requisitos ver se tem um que eu possa estalar.
    Nome da Placa Mãe Asus IPMIP-GS
    Tipo de processador DualCore Intel Core i3 530, 2933 MHz (22 x 133)
    memoria 4 giga

    meu email. josafa.dark@hotmail.com.br, dark.designer@hotmail.com.br

    Reply to Dark
  • Author: Dark
    Comment: quero estala o mac pos meu pc tem os seguintes requisitos ver se tem um que eu possa estalar.
    Nome da Placa Mãe Asus IPMIP-GS
    Tipo de processador DualCore Intel Core i3 530, 2933 MHz (22 x 133)
    memoria 4 giga

    meu email. josafa.dark@hotmail.com.br, dark.designer@hotmail.com.br

    Reply to Dark
  • Author: Antonio Méndez
    Comment: Cool, here the laptop on amazon:

    http://www.amazon.com/HP-XU014UT-ABA-Probook-I5-2410M/dp/B004RCSDO2/ref=sr_1_1?ie=UTF8&qid=1333031632&sr=8-1

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: Cool, here the laptop on amazon:

    http://www.amazon.com/HP-XU014UT-ABA-Probook-I5-2410M/dp/B004RCSDO2/ref=sr_1_1?ie=UTF8&qid=1333031632&sr=8-1

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: try booting with:

    -v arch=i386 npci=0x2000 dsdt=no

    GOOD LUCK

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: try booting with:

    -v arch=i386 npci=0x2000 dsdt=no

    GOOD LUCK

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: Ix.B.H.A_Dz dude try MultiBeast 4.3

    use the SEARCH BAR

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: Ix.B.H.A_Dz dude try MultiBeast 4.3

    use the SEARCH BAR

    Reply to Antonio Méndez
  • Author: Ix.B.H.A_Dz
    Comment: Hi,
    Thank you for the way my brother has succeeded with me but you know where can I find Drivers
    intel hd graphics
    Atheros AR5B97 Wireless Network Adapter
    Broadcom NetLink (TM) Gigabit Ethernet

    Plz i needed bro :/ , help meeeeee

    and thank u again :)

    Reply to Ix.B.H.A_Dz
  • Author: Ix.B.H.A_Dz
    Comment: Hi,
    Thank you for the way my brother has succeeded with me but you know where can I find Drivers
    intel hd graphics
    Atheros AR5B97 Wireless Network Adapter
    Broadcom NetLink (TM) Gigabit Ethernet

    Plz i needed bro :/ , help meeeeee

    and thank u again :)

    Reply to Ix.B.H.A_Dz
  • Author: Antonio Méndez
    Comment: awesone, thanks for sharing :)

    Reply to Antonio Méndez
  • Author: Antonio Méndez
    Comment: awesone, thanks for sharing :)

    Reply to Antonio Méndez
  • Author: Peppe
    Comment: I installed on my pc Lion 10.7.3 iAtkos l2 + update.

    Processore : Mobile QuadCore Intel Core i7-740QM, 2116 MHz (16 x 132)
    Scheda madre : Clevo W860CU
    Chipset scheda madre : Intel Ibex Peak-M PM55, Intel Clarksfield
    Memoria di sistema 4 gb
    DIMM1: Kingston 2 GB DDR3-1333 DDR3 SDRAM
    DIMM3: Kingston 2 GB DDR3-1333 DDR3 SDRAM
    Tipo BIOS : Phoenix (08/04/10)
    Adattatore video: ATI Mobility Radeon HD 5800 Series (1024 MB)
    Unità disco : INTEL SSDSA2M080G2GC ATA Device (80 GB, SATA-II)
    Unità ottica : Optiarc DVD RW AD-7580S ATA Device
    Adattatore di rete : Intel(R) Centrino(R) Ultimate-N 6300 AGN

    all works except:

    webcam with photoboot , system ( works whith ichatt)
    stop
    wifi

    can you help me?
    installing 10.8 I can solve?

    Reply to Peppe
  • Author: Peppe
    Comment: I installed on my pc Lion 10.7.3 iAtkos l2 + update.

    Processore : Mobile QuadCore Intel Core i7-740QM, 2116 MHz (16 x 132)
    Scheda madre : Clevo W860CU
    Chipset scheda madre : Intel Ibex Peak-M PM55, Intel Clarksfield
    Memoria di sistema 4 gb
    DIMM1: Kingston 2 GB DDR3-1333 DDR3 SDRAM
    DIMM3: Kingston 2 GB DDR3-1333 DDR3 SDRAM
    Tipo BIOS : Phoenix (08/04/10)
    Adattatore video: ATI Mobility Radeon HD 5800 Series (1024 MB)
    Unità disco : INTEL SSDSA2M080G2GC ATA Device (80 GB, SATA-II)
    Unità ottica : Optiarc DVD RW AD-7580S ATA Device
    Adattatore di rete : Intel(R) Centrino(R) Ultimate-N 6300 AGN

    all works except:

    webcam with photoboot , system ( works whith ichatt)
    stop
    wifi

    can you help me?
    installing 10.8 I can solve?

    Reply to Peppe
  • Author: phoenix
    Comment: i did but nothing happend
    any other way?

    Reply to phoenix
  • Author: phoenix
    Comment: i did but nothing happend
    any other way?

    Reply to phoenix
  • Author: Tony
    Comment: Recommended but dont

    Reply to Tony
  • Author: Gildo
    Comment: with "iATKOS l2" I still need a USB keyboard and mouse?

    Reply to Gildo
  • Author: Tony
    Comment: good job

    Reply to Tony
  • Author: mnem
    Comment: DISK not formatted error ..when i try to start it on windos CD drive__

    _confused

    Reply to mnem
  • Author: mnem
    Comment: DISK not formatted error ..when i try to start it on windos CD drive__

    _confused

    Reply to mnem
  • Author: mnem
    Comment: for .iso torrent ....Winrar(windows)-error - no archives found - what is this corrupted?

    Reply to mnem
  • Author: mnem
    Comment: for .iso torrent ....Winrar(windows)-error - no archives found - what is this corrupted?

    Reply to mnem
  • Author: mnem
    Comment: I downloaded the .iso torrent ..Burned it to a DVD using nero . now.when i open DVD(in XP) there is no file.?
    -i attemepted mistake?
    -or files cannot be viewed in windows(no files even in win7).

    Reply to mnem
  • Author: mnem
    Comment: I downloaded the .iso torrent ..Burned it to a DVD using nero . now.when i open DVD(in XP) there is no file.?
    -i attemepted mistake?
    -or files cannot be viewed in windows(no files even in win7).

    Reply to mnem
  • Author: freirburro
    Comment: nice latin song, congrats

    Reply to freirburro
  • Author: freirburro
    Comment: work like a charm with my L2

    Reply to freirburro
  • Author: ralph
    Comment: after reading this article,must ask a question is the process the same for the osx11.7.2 (lion)? and why no support for amd? when most of microsoft is support by amd? thanks for your input I find your posting veri informative.

    Reply to ralph
  • Author: ralph
    Comment: Intel and amd run on the same software can I run osx10 on a bundle kit with out any os? and what procedure is recoomended to follow? of course the bundle kit will be very compatible.

    Reply to ralph
  • Author: ralph
    Comment: Intel and amd run on the same software can I run osx10 on a bundle kit with out any os? and what procedure is recoomended to follow? of course the bundle kit will be very compatible.

    Reply to ralph
  • Author: freirburro
    Comment: QUeremos saber si hay un trailer

    Reply to freirburro
  • Author: Luis
    Comment: Worked fine in my Samsung Series 7 laptop.
    Intel Core i7-2675QM (4/8, 2.2GHz)
    Configured with 4 processors on VMW. Lion reported 2 x 2.2ghz.
    Full screen worked fine (1920x1080)
    USB with an IPhone connected it also worked fine.

    Great job! Thanks!

    Reply to Luis
  • Author: Luis
    Comment: Worked fine in my Samsung Series 7 laptop.
    Intel Core i7-2675QM (4/8, 2.2GHz)
    Configured with 4 processors on VMW. Lion reported 2 x 2.2ghz.
    Full screen worked fine (1920x1080)
    USB with an IPhone connected it also worked fine.

    Great job! Thanks!

    Reply to Luis
  • Author: freirburro
    Comment: Nice video dude

    Reply to freirburro
  • Author: WiZarD
    Comment: How to install this image on VMWare 8?

    Reply to WiZarD
  • Author: WiZarD
    Comment: How to install this image on VMWare 8?

    Reply to WiZarD
  • Author: WiZarD
    Comment: How to install this image on VMWare 8?

    Reply to WiZarD
  • Author: Ginga
    Comment: Hey i have the same problem did you manage to work it?

    Reply to Ginga
  • Author: Dario
    Comment: Hello, I installed the L2 is running well. I have a problem with the mouse pointer, the pointer is jerky while moving

    Reply to Dario
  • Author: freirburro
    Comment: Thanks for sharing Syrian :)

    Reply to freirburro
  • Author: syrian rebel
    Comment: important
    now i know why is my laptop doesn't
    go to the iATKOS L2 install page " or wharever is the name of it"
    the reason is i have to Graphic cards
    which is
    ♣ intel (R) HD graphics card 3000
    ♣ Nvidia GT 550M with CUDA
    the first one Mac can know it and use it which is "intel"
    the second one is my problem : mac doesn't know and doesn't use it
    and even dont want to " a stupid joke " so

    if the guys who haves 2 GPU's know how to disable the unworkable one
    they can install and use iATKOS L2 or L1 or any fo the iATKOS project systems
    the problem hear is HOW to DISABLE IT ..!! will
    the Desktop USERS can Remove the unwaorkable one
    from their own motherboard
    but the laptop guys maybe no solution if there is no way
    to Disable the unworkable Graphics card
    or just like Desktop guys .. they REMOVE IT
    Unless there is way to disable it
    in time of PC START's
    i have a laptop
    with 2 GPUs but and i wait alot to boot
    but its realy boaring to wait maybe 3 houers like me
    and realy fast if you remove it like me to
    hope it helps guys :)

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: important
    now i know why is my laptop doesn't
    go to the iATKOS L2 install page " or wharever is the name of it"
    the reason is i have to Graphic cards
    which is
    ♣ intel (R) HD graphics card 3000
    ♣ Nvidia GT 550M with CUDA
    the first one Mac can know it and use it which is "intel"
    the second one is my problem : mac doesn't know and doesn't use it
    and even dont want to " a stupid joke " so

    if the guys who haves 2 GPU's know how to disable the unworkable one
    they can install and use iATKOS L2 or L1 or any fo the iATKOS project systems
    the problem hear is HOW to DISABLE IT ..!! will
    the Desktop USERS can Remove the unwaorkable one
    from their own motherboard
    but the laptop guys maybe no solution if there is no way
    to Disable the unworkable Graphics card
    or just like Desktop guys .. they REMOVE IT
    Unless there is way to disable it
    in time of PC START's
    i have a laptop
    with 2 GPUs but and i wait alot to boot
    but its realy boaring to wait maybe 3 houers like me
    and realy fast if you remove it like me to
    hope it helps guys :)

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: found the solution .. all what you need to do is
    wait your ASUS N53 SN for 3 houers and its gonna rotk will ..
    thanks any way Fb LOVE you man

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: found the solution .. all what you need to do is
    wait your ASUS N53 SN for 3 houers and its gonna rotk will ..
    thanks any way Fb LOVE you man

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: found the solution .. all what you need to do is
    wait your ASUS N53 SN for 3 houers and its gonna rotk will ..
    thanks any way Fb LOVE you man

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: found the solution .. all what you need to do is
    wait your ASUS N53 SN for 3 houers and its gonna rotk will ..
    thanks any way Fb LOVE you man

    Reply to syrian rebel
  • Author: Tony
    Comment: We need to know your PC details :)

    Reply to Tony
  • Author: Tony
    Comment: We need to know your PC details :)

    Reply to Tony
  • Author: Tony
    Comment: We need to know your PC details :)

    Reply to Tony
  • Author: ofekha
    Comment: hello,
    i dont have a mac on my computer
    and i want to install it.
    now, if my friend that he hed a mac can burn my this image file
    and is work on my pc computer??

    Reply to ofekha
  • Author: ofekha
    Comment: hello,
    i dont have a mac on my computer
    and i want to install it.
    now, if my friend that he hed a mac can burn my this image file
    and is work on my pc computer??

    Reply to ofekha
  • Author: ofekha
    Comment: hello,
    i dont have a mac on my computer
    and i want to install it.
    now, if my friend that he hed a mac can burn my this image file
    and is work on my pc computer??

    Reply to ofekha
  • Author: syrian rebel
    Comment: HOW to ???

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: i have
    a Q
    when the iATKOS ask's for press any button ,, i press and than every thing STOPS \any help
    and don't tell me to write any thing no place to do this

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: i have
    a Q
    when the iATKOS ask's for press any button ,, i press and than every thing STOPS \any help
    and don't tell me to write any thing no place to do this

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: NO THING HELP ME OUT MAN
    .... I AM DYEING HEAR ,
    IS THAIR ANY BODY HAVES
    asus n53sN IN THE Iatkos PROJECT
    2 YEARS OF TRYING JUST ENDS WITH BOOTING NO IMPROVE TO INSTALL
    PLEASE I NEED ANY ONE CAN HELP

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: NO THING HELP ME OUT MAN
    .... I AM DYEING HEAR ,
    IS THAIR ANY BODY HAVES
    asus n53sN IN THE Iatkos PROJECT
    2 YEARS OF TRYING JUST ENDS WITH BOOTING NO IMPROVE TO INSTALL
    PLEASE I NEED ANY ONE CAN HELP

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: what if
    when i arrive to click any button
    i click and doesnt work
    give me a FIX fo this
    my device is
    ASUS N53SN ...
    cant doit i am trying from the fires iATKOS lion 1

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: what if
    when i arrive to click any button
    i click and doesnt work
    give me a FIX fo this
    my device is
    ASUS N53SN ...
    cant doit i am trying from the fires iATKOS lion 1

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: will i do
    i restart my laptop
    which is
    ASUS N53SN ...
    and i set the boot from my bios to the DVD rom
    and you know the rest ,,,
    - - - -- - - - - - - - - - - - - - - - - - -
    if i did any thing wrong
    just teach me or show me a video
    i am trying
    to do this from the first iATKOS L1
    and think you so much man

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: will i do
    i restart my laptop
    which is
    ASUS N53SN ...
    and i set the boot from my bios to the DVD rom
    and you know the rest ,,,
    - - - -- - - - - - - - - - - - - - - - - - -
    if i did any thing wrong
    just teach me or show me a video
    i am trying
    to do this from the first iATKOS L1
    and think you so much man

    Reply to syrian rebel
  • Author: freirburro
    Comment: But u arent booting from your installation drive

    Reply to freirburro
  • Author: syrian rebel
    Comment: doesn't work man
    i saw a video on youtube
    and when he press F8 it shows him a small Square in the bottom
    of the screen
    he can write in it what he want
    but when I press F8 every thing STOPS
    any other WAY ???

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: doesn't work man
    i saw a video on youtube
    and when he press F8 it shows him a small Square in the bottom
    of the screen
    he can write in it what he want
    but when I press F8 every thing STOPS
    any other WAY ???

    Reply to syrian rebel
  • Author: freirburro
    Comment: WHEN FIRST BOOTING SCREEN APPEAR :)

    Reply to freirburro
  • Author: syrian rebel
    Comment: V.Nice Thank You V.Much
    but where can i put this << ??
    i cant Write any Thing
    just press any button or press F8
    i tried all of the buttons ....
    HELP Me man
    i am in syria Right now man
    and the security systems are looking for me
    i need to install mac ...

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: V.Nice Thank You V.Much
    but where can i put this << ??
    i cant Write any Thing
    just press any button or press F8
    i tried all of the buttons ....
    HELP Me man
    i am in syria Right now man
    and the security systems are looking for me
    i need to install mac ...

    Reply to syrian rebel
  • Author: freirburro
    Comment: Ok, Syrian Rebel try typing this for booting: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: syrian rebel
    Comment: i have a Q
    when i arrive to press any button or press F8
    i have tried all of the buttons
    and when i press ... it just STOP
    no thing appears i waited 2 Hauers and Half
    nothing appears
    what can I do ??
    PLS Answer an Exuseme for bad (E) i am SYRIAN

    Reply to syrian rebel
  • Author: syrian rebel
    Comment: i have a Q
    when i arrive to press any button or press F8
    i have tried all of the buttons
    and when i press ... it just STOP
    no thing appears i waited 2 Hauers and Half
    nothing appears
    what can I do ??
    PLS Answer an Exuseme for bad (E) i am SYRIAN

    Reply to syrian rebel
  • Author: jebaraj
    Comment: Hello all,
    I am a bit desperate and any help would be appreciated.
    I have this nasty habit of fiddling around till it fails to boot. My Lion(L2) was working well for 1 month. but today I did 2 changes to the boot loader under mac----settings.
    1. I ticked on Ati bios ( I thought since I have an ATI card, it would be good)
    boot screen enable graphics.
    just after this the system does not boot. after the bios loads, the machine stops saying can't find /mach_kernel press any key to continue. _x, _F tags do notwork.
    I would be grateful for anyone who could help me
    Thanks a lot.
    Jebaraj

    Reply to jebaraj
  • Author: jebaraj
    Comment: Hello all,
    I am a bit desperate and any help would be appreciated.
    I have this nasty habit of fiddling around till it fails to boot. My Lion(L2) was working well for 1 month. but today I did 2 changes to the boot loader under mac----settings.
    1. I ticked on Ati bios ( I thought since I have an ATI card, it would be good)
    boot screen enable graphics.
    just after this the system does not boot. after the bios loads, the machine stops saying can't find /mach_kernel press any key to continue. _x, _F tags do notwork.
    I would be grateful for anyone who could help me
    Thanks a lot.
    Jebaraj

    Reply to jebaraj
  • Author: jebaraj
    Comment: Hello all,
    I am a bit desperate and any help would be appreciated.
    I have this nasty habit of fiddling around till it fails to boot. My Lion(L2) was working well for 1 month. but today I did 2 changes to the boot loader under mac----settings.
    1. I ticked on Ati bios ( I thought since I have an ATI card, it would be good)
    boot screen enable graphics.
    just after this the system does not boot. after the bios loads, the machine stops saying can't find /mach_kernel press any key to continue. _x, _F tags do notwork.
    I would be grateful for anyone who could help me
    Thanks a lot.
    Jebaraj

    Reply to jebaraj
  • Author: freirburro
    Comment: Johanooo, you gotta BOOTING ISSUE, try looking for your self with TAGS+ or with the SEARCH BAR.

    But you can try before WHITE SCREEN: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: freirburro
    Comment: Johanooo, you gotta BOOTING ISSUE, try looking for your self with TAGS+ or with the SEARCH BAR.

    But you can try before WHITE SCREEN: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: freirburro
    Comment: Johanooo, you gotta BOOTING ISSUE, try looking for your self with TAGS+ or with the SEARCH BAR.

    But you can try before WHITE SCREEN: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: Johanooo
    Comment: I boot everything perfect, I come to the installation and when i get the green logo when the installation is complete and everything has been installed. It reebots and when I choose Mac OS X for complete the secound part. I can't come thruogh the white background and all I see is a Apple Logo. What is wrong ? What have i missed to do?

    My Computer Spec..

    Asus P6T SE Motherboard
    Intel Core i7 CPU 950
    6 GB RAM
    NVIDA GeForce GTX 460

    Any one who know what to do.. plz

    Reply to Johanooo
  • Author: Johanooo
    Comment: I boot everything perfect, I come to the installation and when i get the green logo when the installation is complete and everything has been installed. It reebots and when I choose Mac OS X for complete the secound part. I can't come thruogh the white background and all I see is a Apple Logo. What is wrong ? What have i missed to do?

    My Computer Spec..

    Asus P6T SE Motherboard
    Intel Core i7 CPU 950
    6 GB RAM
    NVIDA GeForce GTX 460

    Any one who know what to do.. plz

    Reply to Johanooo
  • Author: Johanooo
    Comment: I boot everything perfect, I come to the installation and when i get the green logo when the installation is complete and everything has been installed. It reebots and when I choose Mac OS X for complete the secound part. I can't come thruogh the white background and all I see is a Apple Logo. What is wrong ? What have i missed to do?

    My Computer Spec..

    Asus P6T SE Motherboard
    Intel Core i7 CPU 950
    6 GB RAM
    NVIDA GeForce GTX 460

    Any one who know what to do.. plz

    Reply to Johanooo
  • Author: Brain Leisure
    Comment: Still a black screen with these options...

    Reply to Brain Leisure
  • Author: Brain Leisure
    Comment: Still a black screen with these options...

    Reply to Brain Leisure
  • Author: freirburro
    Comment: for most booting issue try: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: freirburro
    Comment: for most booting issue try: -v arch=i386 npci=0x2000 pciroot=yes dsdt=no

    Reply to freirburro
  • Author: Brain Leisure
    Comment: Hey there,

    I burnt the iatkos L2 dvd and I boot on it with an external usb DVD drive.

    I launch the install with the -v option and the only thing I get is a black screen once all the kexts are loaded.

    If I don't use the -v option, I freeze at the apple logo.

    Any idea ?

    Thanks

    Reply to Brain Leisure
  • Author: Brain Leisure
    Comment: Hey there,

    I burnt the iatkos L2 dvd and I boot on it with an external usb DVD drive.

    I launch the install with the -v option and the only thing I get is a black screen once all the kexts are loaded.

    If I don't use the -v option, I freeze at the apple logo.

    Any idea ?

    Thanks

    Reply to Brain Leisure
  • Author: Brain Leisure
    Comment: I burnt the L2 dmg file with transmac, booted on it with an external usb dvd drive but nothing happens. I'm stuck at the apple logo :(

    Reply to Brain Leisure
  • Author: Brain Leisure
    Comment: I burnt the L2 dmg file with transmac, booted on it with an external usb dvd drive but nothing happens. I'm stuck at the apple logo :(

    Reply to Brain Leisure
  • Author: Tony
    Comment: Yeah, but also just download Chimera alone :)

    Reply to Tony
  • Author: Tony
    Comment: Yeah, but also just download Chimera alone :)

    Reply to Tony
  • Author: Tony
    Comment: Yeah, but also just download Chimera alone :)

    Reply to Tony
  • Author: Admin
    Comment: Guys..
    I've installing this iATKOS L2, and have to boot using rBoot LE from tony's web, then how to boot directly without have to use tony's boot cd again.
    Will i have to installing Chimera within MultiBeast ?

    Reply to Admin
  • Author: Admin
    Comment: Guys..
    I've installing this iATKOS L2, and have to boot using rBoot LE from tony's web, then how to boot directly without have to use tony's boot cd again.
    Will i have to installing Chimera within MultiBeast ?

    Reply to Admin
  • Author: AmenoMC
    Comment: Hola, excelente aporte, muchisimas gracicias, tendras el Link en Torrent ya que los links estan caidos.
    Saludos

    Mi Correo ameno@hotmail.it

    Reply to AmenoMC
  • Author: AmenoMC
    Comment: Hola, excelente aporte, muchisimas gracicias, tendras el Link en Torrent ya que los links estan caidos.
    Saludos

    Mi Correo ameno@hotmail.it

    Reply to AmenoMC
  • Author: Riva el Maestro
    Comment: thank u i did it already!!!!!!!!!!!!!!!!

    Reply to Riva el Maestro
  • Author: gepard
    Comment: nad by the way, can i install updates like securitx fixes and so on without an apple id or whatever this might called?

    Reply to gepard
  • Author: gepard
    Comment: nad by the way, can i install updates like securitx fixes and so on without an apple id or whatever this might called?

    Reply to gepard
  • Author: gepard
    Comment: nad by the way, can i install updates like securitx fixes and so on without an apple id or whatever this might called?

    Reply to gepard
  • Author: GTE
    Comment: Thank you so much man!

    Reply to GTE
  • Author: gepard
    Comment: ok, i learned now that it is running pretty fast on mainboardz68 i3 2x3,3 ghz on windows 7 64bit an latest VMWARE but still its bucking (very quick short stoppings, yeah my english).

    any ideas on that? power should be enough there since it runs fast, apss are really quik there, but mouse isnt smooth at all...

    any ideas?

    thanks!

    Reply to gepard
  • Author: gepard
    Comment: ok, i learned now that it is running pretty fast on mainboardz68 i3 2x3,3 ghz on windows 7 64bit an latest VMWARE but still its bucking (very quick short stoppings, yeah my english).

    any ideas on that? power should be enough there since it runs fast, apss are really quik there, but mouse isnt smooth at all...

    any ideas?

    thanks!

    Reply to gepard
  • Author: gepard
    Comment: ok, i learned now that it is running pretty fast on mainboardz68 i3 2x3,3 ghz on windows 7 64bit an latest VMWARE but still its bucking (very quick short stoppings, yeah my english).

    any ideas on that? power should be enough there since it runs fast, apss are really quik there, but mouse isnt smooth at all...

    any ideas?

    thanks!

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: gepard
    Comment: i installes succesfully on a z68 mainboard with i3 2x 3,3 ghz and the onboard grafik hd2000. used lates vmware.

    problem is, its too slow to work. even the mouse hangs here and there. in this state its not usable.

    did i do something wrong, any ideas?


    thanks

    Reply to gepard
  • Author: Tony
    Comment: we can't help u with that :(

    this is only HOW TO INSTALL MAC ON PC :)

    Reply to Tony

2 comments :

  1. intel tigerlake any update ??

    ReplyDelete
  2. cant install mac os big sur gets stuck at 2 hours 19 mins i using broadwell notebook olarila efi

    ReplyDelete