Archive for February 2022

[Guide] How to keep Clover working when installing Windows and Linux

A very common issue when multibooting macOS/OS X with Windows and Linux is that after installing the latter the computer will only boot to them. The reason for this is that Clover does not automatically add itself to the UEFI firmware boot menu that is accessible by pressing F12 or another hotkey. When no other operating systems or boot managers are present the computer will automatically start Clover from the UEFI fall back path at EFI\Boot\BootX64.efi which may be present on the menu as an...

Read more

Intel internet access issue Mojave Clover hackintosh

Hi, I have a Clover hackintosh with Mojave, with Intel ethernet, Gigabyte motherboard.
Ethernet worked fine until today. The only thing I changed was that I disabled “wake for ethernet network access” and disabled wake on lan in bios. After this the computer first wouldn’t turn on, but when it did, it doesn’t have internet access. I get a random ip address and notification that it’s not connected to internet.
I changed enerything back, but still no internet connectivity. I do get the lights...

Read more

Author: hrenovka

Parallels boot camp partition booting broke after opencore update

My build has 2 separate NVME drives, one for OS X Monterey and another for Windows 10. I originally created the Windows disk using boot camp, then deleted boot camp and ran it with Parallels for the last 4 years.

I updated open core and I can still boot Windows 10 from the opencors picker menu no problem. Unfortunately I can no longer boot the same partition from Parallels. I now get this error:

Screen Shot 2022-02-28 at 12.42.52 AM.png

I set it up something like this as best I can remember:

  • Create a new VM...

Read more

Boot Camp Windows EFI partition files

Can someone post a screen shot of the files that are in their boot camped windows EFI partition please?

Hackintosh (Prime Z490A) problem with dual monitor (DP and HDMI)

Hi guys,like in the title i have a problem with an hackintosh,perfect in every aspect,with that characteristics:

i7 10700k Asus Prime Z490A Crucial Ballistix 4000Mhz 64Gb 2x Ssd nvme

I have a little (but very bad) problem,if i start the pc with only the hdmi cable connected i don’t have any problem,i use a 29” lg ultrawide with a very fantastic experience. The problem is that,i use a second screen for work and when i plug the DigitalPort cable (with the pc already ON) i can use booth with...

Read more

Author: iMhack

mac os exitbs.start problem

hi i have a problem with instaling big sur on my device and i dont know why it jump outs and i try montrey but in montery says support.apple.com/mac/setup can you help me here is my efi

Author: aroot

Mojave 10.14.6 USB 2.0/3.0/3.1 fix

Hi Guys,

In case you wonder how to fix USB and have 100% it working at full speed of USB 2.0/3.0/3.1.
Here are kernel and kext patches to be set in Clover Configurator at KextsToPatch tab:

Name Find HEX Replace HEX Comment
com.apple.iokit.IOUSBHostFamily 83FB0F0F 83FB3F0F USB Port Limit Patch 1 DalianSky
com.apple.iokit.IOUSBHostFamily 83E30FD3 83E33FD3 USB Port Limit Patch...


Read more

Author: ZdzislawPomata

Open Core or Bust

Ok. So I have ditched Clover for OpenCore and I'm excited from the positive responses and testimonials of the ease of use and stability of OpenCore.

A little background. I built my Hackintosh a few years ago, used Clover and installed Catalina. When it was time to move to Big Sur, I could never get it to take with Clover so I said F' it... lets start from scratch.

So I have followed the Dortonia guide and created my bootable USB. I formatted the Hard Drive and slid the USB into the...

Read more

Author: jimmyjames1stad

Help with Big Sur (11.6.0) on Dell 5820-X

Hi.

Following on from this post https://www.tonymacx86.com/threads/dell-precision-5820-xeon-w2125.263298/page-9 I'm trying to install MacOS BigSur (11.6.0) on my machine (Dell 5820, Intel Core i7-9800X, Radeon Pro WX4100 GPU)

I'm stuck in this place right now. Can anyone help?

Author: holdy89

Very poor CPU-performance due to Catalina?

Hi!

I need help with a rather old system.
I experience very bad cpu performance since upgrading to Catalina.
I'm a music producer working in Ableton Live and Logic Pro.
I suddenly have a lot of crackles and dropouts although when monitoring Intel Power Gadget the Cpu barely runs over 1ghz.
Also got a very poor Geekbench score compared to when i was running Sierra.


My system:

z170x Designare
Intel Core i7-6700K
64.00 GB 3000 MHz DDR4
Intel HD Graphics 530 1536 MB
UAD Apollox4 thunderbolt...

Read more

Author: Torpedvin

Lenovo M83 big sur opencore hackintosh (AppleKeyStore: operation failed)

Board:Lenovo thinkcentre m83
CPU i5 4670
Graphic:4600

First time to try install hackintosh on my old pc
lenovo m83
first error show
appleKeyStore: operation failed
wait after five minutes
second error come put
com.apple.displaypolicyd abnormal code

I have no ideas what going on
change smbios platform info can see white apple.
After that, back to above situtation

here my m83 efi with opencore file

Author: techasst

ASUS prime Z370-A Big Sur 11.2 sleep problem

Hello, I have problem with ASUS prime Z370-A, intel cpu 8700k at 11.2 big sur with 0.6.6 opencore. Otherwise all are fine except sleep.
When i press sleep all the time hdd led flash goes to black screen and then never awake.
I have to push reset to reboot and goes into mac os big sur again.

Is there any solution for this?

Author: sissyfos

Clover to OC failure

Hi all, running Catalina on Clover for several years, all is working great!
Now tried to remove Clover and switch to OC. Done all configuration's per OC Coffee lake guide on EFI, now cannot boot...
When boot, receive:
OpenCore Boot Menu (REL-078...)
> 1. Reset NVRAM
[Restart][Shutdown]

and that's it...

What have i done wrong?

I have my old EFI backed up, ill try to restore to it.

Author: kyury

Slugnet's Video Editor - GA-Z77X-UD5H, i7-3770k, Gigabyte GeForce GTX 660 Ti

Slugnet's Video Editor
GA-Z77X-UD5H / i7-3770k / 16GB RAM / GIGABYTE GeForce GTX 660 Ti


Components

Gigabyte GA-Z77X-UD5H Motherboard
http://www.amazon.com/gp/product/B007R21JK4/

Intel Core i7-3770K Quad-Core Processor 3.5 GHz 6 MB Cache LGA 1155 - BX80637I73770K
http://www.amazon.com/gp/product/B007SZ0EOW/

GIGABYTE GeForce GTX 660 Ti WINDFORCE 2X OC Edition 2048MB GDDR5 PCI-Express 3.0 2x DVI / HDMI / DP SLI Ready...

Read more

Author: slugnet

How do you manage BIOS settings when multi-booting with Windows 10?

I installed Windows 10 on a new SSD. I already had Catalina on its own SSD for the same system.
So... If I put BOTH of those back in, I am assuming that the Windows Boot Loader and my OC EFI will leave each other alone. And, if selecting the macOS boot EFI as default in BIOS, OpenCore 'should' recognize the Windows Boot Loader...Right?

But, with the required BIOS settings for Catalina and Windows being so different, how do we manage the situation without changing the BIOS settings each time?

Hackintoshing the Vostro 3888

Hello Everyone!
I recently got the Dell Vostro 3888 & wanted to install Mac OS on it. I did install Mac on other computers, but I really don't know where to start with this Desktop.

*****
Desktop Specs:
Dell Vostro 3888
Intel Core i5 - 10400
12 GB Ram (DDR4 - 2666 Mhz)
1 TB Seagate HDD
Intel UHD 630
Realtek High Definition Audio
Intel Dual-Band Wireless-AC 3165
*****

Thanks!

Author: HassanElDessouki07

Catalina on Lenovo M90P - random freezes during boot and won't boot after multibeast install

Fresh install catalina on M90P. After install, it will boot fine when using usb and selecting the hdd with catalina installed. Sometimes it won't boot and will freeze and different points during the loading bar screen. I tried install multibeast after install and when rebooting for the first time, it won't boot fully, freezes again randomly except it never gets to the desktop.

Author: sabregreen

Installation getting stuck at "VM Swap Subsystem is ON"

Hi everyone,

Not my first rodeo doing a Hackintosh, but my first time ever doing a Ryzen Hackintosh.

My system specs are as follows:
CPU: Ryzen 5600X
Motherboard: Gigabyte X570 Aorus Elite Wifi
GPU: AMD RX 6900 XT
SSD: Samsung Evo 970+ 1TB (Firmware has been updated to the latest) (I am not installing to this drive at all. Using a 256GB SanDisk SSD)

I am trying to install MacOS Big Sur 11.6.2 onto my machine using Opencore 0.7.8. Every time I go to install, no matter what kext I update, I...

Read more

Author: IndoCanuck

NUC7i7BNH - Cannot get past the 100% load bar with Apple logo

Hi all,

I am new to the Apple game but recently fell in love with the architecture!

I am trying to load macOS Catalina on my NUC7i7BNH or NUC10i3FNH. Currently, I am trying the NUC7i7BNH. If you think using the NUC10i3FNH would be better, let me know!
The NUC7i7BNH has the following specs...
  • PU: Intel® Core™ i7-7567U Processor
  • Graphics: Intel Iris Plus Graphics 650
  • INTEL SSD 120GB
  • RAM: 8GB x 2 DDR4 2133 MHz
I am following the "UniBeast: Install macOS Catalina on Any...

Read more

Author: tonythetech412

Gigabyte Z490 Aorus Pro Ax + i9-10805K + 5700 XT

1605512444772.png
OpenCore: 0.6.3

sleep: ok
network: ok
wifi + ble: not ok
audio: ok
xmp: ok

Author: zshchou

Moving from CLover to Open Core... need help

So I am moving from Clover to OpenCore because no matter what I try, I cannot get Big Sur or Monteray to install. I'm running the newest version of Clover and the newest version of configurator so at this point, I am finished.

However, as I'm trying to get OpenCore ready for the switch, my configurator shows absolutely nada in sections like ACPI, SMBios and so forth and I'm wondering what in the holy hell is going on. I mounted my hard drive and I can see the EFI but when I go to those...

Read more

Author: jimmyjames1stad

Gigabyte Z490 Aorus Pro Ax + I9 10805k + 5700XT

1605512444772.png
OpenCore: 0.6.3

sleep: ok
network: ok
wifi + ble: not ok
audio: ok
xmp: ok

Author: zshchou

[SUCCESS] Big Sur 10.11.4 + GA-Z170N-WIFI + Samsung 860 EVO + RX550

Screenshot 2021-06-16 at 2.57.46 PM 2.png

Screenshot 2021-06-16 at 2.58.19 PM.png

Screenshot 2021-06-16 at 5.32.41 PM.png

Thought to bring this build up-to-date for anyone still using this motherboard (which I first started with Sierra here more than 4 years ago) >

I now have it working from Catalina all the way to Big Sur 11.4. I've made a number of changes to the build, biggest change of which is,
it is now running using Opencore 0.6.1. I have also since changed...

Read more

Author: Middleman

Problem with Nvidia Driver (Black Screen)

Hey, in general it looks like this, I try to boot my nvidia card in the system high sierra, but no matter what I do, I still have a black screen, unless I use “nv_disable=1” in the boot parameters, installed the latest drivers, I also restarted nvram... but still black screen, literally my monitor turns off and “no signal” appears on the screen

Whatevergreen also installed and Lilu

My PC:

CPU: I7 9700k
GPU : GTX 1070
Mobo : Z390 Gaming X

My EFI Folder i link too

Author: Mariok8