Motherboard: Asrock Z370 Extreme4

CPU: i7 8700

GPU: RX 570 (in PCIE slot 1) and GTX 1070Ti (in PCIE slot 2)

​

I have spent some time looking at the other iMessage related posts here and have tried the methods outlined in them but none of them have been working for me. My issue initially was that when signing into iMessage a pop up message came up which said I needed to contact apple and give them a customer number so they could authenticate my iMessage account. I called them, gave them the number and now I am no longer getting that message... However now I am getting a new message which says: "Could not sign into iMessage. Could not sign in. Please check your network connection and try again." I have tried removing folders and files from inside the library folder that have been recommended by many different posts but still have had no luck. I'd really appreciate any help or advice you could give me with this issue.

​

NOTE: My wi-fi/bluetooth card is the FV-T919 which I bought because many sites said it was one of the best wireless cards to purchase for a Hackintosh since it usually works seamlessly with iMessage, FaceTime, Handoff, etc...

​

Thanks in advance for your time in helping me with this issue

Where can I buy a G4 or G5 case that is precut/ready for hackintosh build?

Is there a company that does this? Thanks!

Is now my model could work properly ? I red that my wifi should not match. How do you switch beetween tw GPU on macOS?

This issue seemed to start out of nowhere when I changed my system definition in Clover. It persisted even AFTER changing it back to iMac 11,2 so I then tried updating the Clover app and bootloader to the newest version. The latency also makes it hard to type because the keyboard input lags. So I guess it's overall system lag but most noticeable when typing or playing media.

I've since updated to Sierra and while overall performance has increased I still can't play video or audio or type fast because the lag is so bad.

Here's what I've already tried troubleshooting: -Tried both OS X default and newest nvidia web drivers -Updated all essential kexts to newest versions. -updated Clover app and bootloader to newest versions -Many different system definitions in SMBIOS (currently using iMac 14,2, some definitions won't allow me to boot at all) -nvdisable=1 on start up -ran Kext utility to repair permissions and caches -Installed uliu and nvidiafixup kexts -Booted Windows 10 install to make sure everything works there, and it does. -System temperature is fine

Can anyone please help? I'm out of ideas and this is very frustrating because it started out of nowhere.

My specs: ASUS Maximus III Gene Intel i5 750 @ 2.68ghz nVidia GeForce 650 GTX 1GB 12 GB Corsair DDR3 RAM 2TB

I have tried for the past two weeks to get audio working on my first hackintosh. I am on macOS 10.14.1. I have tried to put the files in EFI etc several times to no success I am trying to use Realtek ALC887. Thank you in advance for any help

Hello beautiful people of this amazing and helpful sub Reddit. So I recently stumble upon on the idea of making my pc a hackintosh but I have no Mac to get the MacOS firmware and I read that a VM machine can make it much harder. So any ideas or anyway I can accomplish my mission of getting the MacOS?

Mojave installed successfully with almost no hiccups, and transferred all of my old data and applications from my old ssd, which seems to have worked fine. However, Mojave completely freezes up after a few minutes after having logged in. I've tried countless different EFI configurations and so far nothing has helped. I'm trying to create a fresh install now but for whatever reason the usb that I rebuilt isn't working. Is anyone having the same symptoms on Z390?

Here is my build list:

Intel 8086k Gigabyte AORUS Ultra Z390 Rx Vega 64

I have a HP Chromebook 11 G4 with 16gb of storage and 2gb of RAM. I have put it into developer mode and flashed the full rom so that it can boot with UEFI.

At last I've built my first Hackintosh. This are the specs:

• Gigabyte H370 HD3
• i7 8700K
• Sapphire Pulse Radeon RX Vega 56

Almost everything works but there are a few problems that are giving me a headache:

• The computer throws a kernel panic whenever I try to shutdown / reboot.
• The computer freezes when I try to put in sleep.
• The case fans are always at 100% when the OS boots up.
• I can't get the USB 3.0 ports work with USB 3.0 devices.

This is the list of kexts I've now installed:

• AppleALC.kext
• EFICheckDisabler.kext
• FakeSMC.kext
• IntelMausiEthernet.kext
• Lilu.kext
• NoVPAJpeg.kext
• RadeonVega56AirCoolingFansFix.kext
• USBInjectAll.kext
• WhateverGreen.kext
• XHCI-unsupported.kext

And this is my config.plist.

I'm starting to think that I've chosen the wrong motherboard. Although I'm aware chances are the motherboard is ok and I'm the one doing something stupidly wrong.

i tried to install macOS High sierra on my pc after i read about someone with a similar pc did it. specs: i7 7700 msi h270 16 gb vengeance ddr4 1 tb WD gtx 1060 6gb

i followed a guide, and all the installation went so fine, when i first booted with the usb i also saw that all the pci card (ethernet for example) and usb were recognized, ram and processor were okay so i copied the EFI folder of the usb to the efi folder of macOS and rebooted. I installed the nvidia web drivers for High Sierra 10.13.0 A365 (my version) and when i rebooted it shows the prohibition sign that i hate so much... i don't know why and how i can solve this, i can't even boot anymore so i'm asking for espert help! the guide i followed was: https://hackintosher.com/guides/high-sierra-install-full-guide/

So I made a second boot using a spare SSD I have with Vanilla High Sierra because I couldn’t get my 4K monitor to read as 4K on Mojave (I still have it on my Mojave Vanilla SSD though).

I used the same Vanilla install Method where it goes in depth step by step to release any issue. I’m guessing there’s just a few more steps that I need to do to get High Sierra running fully with my setup.

Issues so far, Audio (DP Audio not even recognized) iGPU not working, only shows 31MB. Flickering on the screen, using iMac 18,1 My 4K Monitor resolution is recognized automatically USB’s

My setup: Motherboard: Gigabyte Z370 Gaming 7 CPU: Intel i7-8700k Monitor: LG 27UK650 Mac OS X: 13.4

Any one get their setup up and running? I know High Sierra is a mature build I’m staying at 13.4 since I heard 13.5+ does have a few issues (I may be wrong). I have latest whatevergreen and Lilu kext as well.

I’m trying to see if my PC configuration will be compatible on making a hackintosh. PC Specs Motherboard: Asus Prime Z370-A CPU: Intel Core i5 8600k GPU: Nvidia GTX 1080TI (evga) RAM: 2x Corsair vengeance 16GB DDR4 3200Mhz I also have 2 16GB DDR4 2133Mhz sticks Storage: Samsung EVO 860 250GB SSD / 2TB SSHD 7200rpm

Please let me know if i’m able to run a successful hackintosh on this machine. And if so can I duel boot it with windows once i get MacOS on it?

Hi, I tried to install Hackintosh Mojave on my pc, it's all working but it continues to strutter and I can't understand how to use Clover. Please, can someone pm me and help me on Skype ? I need to finish important work with this pc please !