Archive for October 2013

Install Niresh 10.8.2 and gives reboot message #Hackintosh

Hi I installed Niresh 10.8.2 Mac os X on My lenovo Z580. The installation worked 100% but after installation it gives I must press and hold the... source

Sapphire HD 6870 4 Port 10.9 (Duckweed) #hackintosh

J'ai essayé de repatcher le fichier j'espère que celui marchera bien pour vous.source

BCM57781 Maverics 13A603 #hackintosh

BCM57781 kext for 10.9 13A603

patched by mesource

ATI Radeon HD 550v/4650(1002_9480) OSX 10.9 Mavericks #hackintosh

This is the kexts for ATI Mobility Radeon HD 550v/4650 (1002_9480), taken from OS X 10.9 (13A603).

Edited by me, works also HDMI & VGA output. Thanks bcc9 & crazybirdy - insanelymac.

Delete only AMD4600Controller.kext.

Install these two kexts with kext utility or others kext installer.

Reboot.

Done !!! source

AppleHDA 2.5.2 (10.9 GM) for ALC898 #hackintosh

This is AppleHDA 10.9 GM patched using Toleda's patches and guides.

Works on my GA Z77X UP5 TH motherboard, with DSDT layout ID 01.source

BCM5722D.kext moodet for 14E4:1690 #hackintosh

Working on Acer TravelMate 8572TG (BCM57224) with Mountain Lion 10.8.5 and Mvericks 10.9 (13A598).

Instal with Kext Helper or put in IONetworkingFamily.kext/Contens/Plugin and fix permission.

After restart will be working. MAC Address in properitis show sometims 00:00::00:00:00:00 but

somebody maby fix it in future.

Happy networking. Wiki.source

Intell HD 1st generation full support kexts for Maverics... #hackintosh

Intell HD 1st generation full support kexts for Maverics...For me works fine...Posted Image

Please feedback about this...Thanks...source

Nvidia CUDA #hackintosh

Version: 5.5.28

Release Date: 2013.10.23

Operating System: Mac OS

Language: English (U.S.)

File Size: 54 MB source

RT2870USBWirelessDriver.kext for Mavericks 10.9 #hackintosh

RT2870USBWirelessDriver.kext for Mavericks 10.9 extracted from BearExtender Mavericks Beta driver at http://store.bearext...avericks-driver - Shutdown and restart WORKS NOW !!! :)source

Linksys WMP300N based on Broadcom chip (v1) #hackintosh

this is my modified kext for IO80211Family.kext



it comes from OS X 10.8.5 installation



i added the Linksys WMP300N based on the Broadcom 4329 chip (aka v1)



install it in S/L/E or E/E with your preferred kext installer, and repair caches and permissionssource

Intel GMA 4500hd problem, please help... #Hackintosh

i'm using hackintosh for more than a year now, and everything was excellent until i decided to install 10.8.2, and i used 10.6.8 without problems...... source

AR9227 for Mavericks #hackintosh

install in /Extra/Extensions folder



it's work on TL-WN851ND



should work on TL-WN751ND AND AR9285 source

IORegistryExplorer #hackintosh

Latest IORegistryExplorer. source

AppleHDA 10.9 ALC889 #hackintosh




Device (HDEF)

{

Name (_ADR, 0x001B0000)

Method (_PRW, 0, NotSerialized)

{

Return (Package (0x02)

{

0x0D,

0x05

})

}

Method (_DSM, 4, NotSerialized)

{

Store (Package (0x04)

{

"layout-id",

Buffer (0x04)

{

0x0C, 0x00, 0x00, 0x00

},

"PinConfigurations",

Buffer (Zero) {}

}, Local0)

DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

Return (Local0)

}

}



Without DSDT take HDAEnabler889.kext.source

Geen geluid na software update #Hackintosh

NO SOUND AFTER SOFTWARE UPDATE. Sorry thought this was a dutch forum. I have a hackintosh with Mountain Lion, sadly there has been a software... source

Dual boot, separate SSDs, can't boot to Mac OSX after install. #Hackintosh

Hey all, I'm trying desperately to get this thing off the ground. I've followed all the tutorials on hackintosh.com via tonymacx86.com that I can... source

LENOVO V480 battry kext #hackintosh

LENOVO V480 battry kext,i have test is ok!source

error appleintelcpupowermanagement, kernel panic #hackintosh

his is the kextsource

Lenovo G580 10.8.x Kexts #hackintosh

All required kexts and tools to run Mountain Lion 10.8.x on Lenovo G580 without needing to use any other tool or kext.

Tested on Mountain Lion 10.8.5 (12F45)



This Package Contains:

0. Kext Utility (Kext Installer)

0. Extra folder that contains pre-edited DSDT to enable brightness.

1. Ethernet Controller (LAN PORT)

2. Graphics Card (Intel HD Graphics 3000 & 4000) Enabler.

3. Touchpad With Gestures Control

4. USB 3.0

5. Audio

6. Battery

7. Bluetooth 4.0

8. Wifi : Atheros 9285 (AR5B95)

9. And other kexts that are required to start OS X like FakeSMC...etc.source

[Guide] Success! Install 10.8 on old unsupported Mac



MLPFv0.3 supports the following Macs
-MacBook2,x
-MacBook3,x
-MacBook4,x
-MacBookPro2,x
-MacBookAir1,1
-MacMini1,x (C2D upgraded)
-MacMini2,x
-iMac4,x (C2D upgraded)
-iMac5,x 


MLPF v0.3 currently does not support the following Macs.
-MacPro1,1 (Except 7300gt models)
-MacPro2,1 

(Support coming in v0.3.1 stay tuned) 
-----------------------------------------------------------------------------------------------------------------
For education purpose only. Try at your own risk, always install on a second partition.

Prerequisites:
- Supported Macs listed above.
- Running 10.7 Lion
- At least 2GB of RAM.
- A copy of Mountain Lion.
- 8GB USB (Optional)
- 1 HDD, 2 Partitions; Name one Install (8GB) & ML (20GB>)


Full instructions:

1. OBTAINING A LEGAL COPY OF MOUNTAIN LION. (Skip to 2 if already done)


Picture 1A

1.1 Get a copy of Mountain Lion, please purchase the retail version of ML from the Mac App Store (refer Pic 1A).
1.2 ways to obtain it legally.
METHOD ONE
* Download Parallel Desktop 8 Trial, install Lion via Parallel Desktop. Once completed, buy Mountain Lion from the Mac App Store inside Parallel Desktop and copy it to your Applications folder.
METHOD TWO
* Get a supported Mac and buy it directly from the App Store, copy it to a thumb drive (8GB or larger) and transfer it back to the unsupported Mac.

[IMG][/IMG]

Video Tutorial Part One
1. Open Disk Utility, create TWO new partition. Name one "Install" (8GB) and the other "ML" (20GB>)


2. Open MLPostFactorv0.3 and click Continue.


3. Click Continue again, and again.


4. Make sure the drive is pointed to "Install" partition you created earlier and you selected the right version of Mountain Lion you're installing. 


5. Just sit and wait, grab yourself a coffee when waiting as this will take about 15 to 20 minutes


6. After MLPF Tool is completed, hold down "Option" and reboot into "Install" partition






7. Install ML on partition named "ML".


8. You will get "Installation Succeeded" at the end of the installation.
9. Go to Utilities, select continue, continue and select MLPostFactor apply it to the partition "ML"






10. Reboot into Mountain Lion
8. Enjoy!

MLPostFactorV0.3 Download Link
(For Macs with GMA950, GMA X3100, X1300, X1600, X1900XT, 7300GT & 7600GT Graphics)
Download Link #1 Direct Link
Download Link #2 Mega Download Recommended!

Clover_v2k_r2236.pkg #hackintosh

Features

  • using UEFI BIOS or own CloverEFI

  • default boot after timeout into previous chosen OS

  • customizable GUI: themes support, own icons, fonts, background image, animated pictures, mouse pointers.

  • F1 - multilingual help, depending on language in config

  • saving preboot.log from GUI by typing F2 and system.log for debug

  • save original (OEM) ACPI tables by pressing F4

  • test DSDT patching with F5

  • save videoBIOS into EFI/misc by pressing F6
  • <