Archive for February 2018

High Sierra Lag Help

I have a hackintosh that is running High Sierra. I have an i7 7700k along with a z270 motherboard. I also have a 1080 ti with Nvidia drivers.

Basically, I'll be using safari and I'll have a video on the left side and then I search something on the right side. It'll freeze for a split second and then search and speed up. It's like the video lags, not only that, but I'll see it when I'm doing other things. Any advice on what to do?

I'm running NVIDIA Web Driver: 387. and macOS 10.13.3 Supplemental Update

submitted by /u/Friendlyx
[link] [comments]

Clover not showing without USB

I installed Sierra 10.12.6 on my HD 4000 based laptop. Its working well apart from the audio. But currently I'm trying to get it to boot without the usb.

I followed the vanilla installation guide without unibeast/multibeast. (Rehab's laptop guide on tonymacx86) But clover doesn't appear in the boot menu. In the boot options I see Mac OS X, but it doesn't work and it boots me into Windows.

Just to point out, I have Windows 10 installed (UEFI GPT). I installed Sierra on a separate SSD as UEFI GPT as well.

In the guide, he mentioned two points: select "Install RC scripts on target volume" and/or "Install all RC scripts on all other boot volumes", but not for USB.

Upon searching for a solution someone mentioned that when he used the option to install on all other volumes, clover started showing up in the boot menu. But I'm afraid that it might over write on my current windows boot file if I select that? What does it mean to install "RC scripts on all other volumes", does it mean it will install them on not just the Sierra partition but every other partition on all the drives(two SSDs in my case)?

My other attempt for a solution was to just clone my USB boot drive into a 24gb mini SSD that came in my laptop but even then clover doesn't show up in the boot menu. If I boot using the USB now, I can see that there's a new cloned partition on that SSD. But this didn't solve my problem as well.

What should I do?

Any help is appreciated.

submitted by /u/mrdev_333
[link] [comments]

SanDisk microSD Cards On Sale for Up to 33% Off [Deal]

A selection of SanDisk microSD cards are on sale today for up to 33% off. The cards range in size from 16GB to a whopping 400GB.

The 400GB SanDisk Ultra microSDXC UHS-I card gives you the freedom to shoot, save and share more than ever before. Our highest-capacity microSD card is perfect for recording and watching Full HD video, with room for even more hours of video. Transfer speeds of up to 100MB/s ensure that you can move all your content blazingly fast—up to 1200 photos in just one minute. Ideal for Android-based smartphones and tablets, this card’s A1 rating means that you can load apps faster too. And, with its unprecedented 400GB capacity, this card lets you capture and store more than ever before.

Share Article:
Facebook,   Twitter,   LinkedIn,   Google Plus,   Email,   Reddit,   Digg,   Delicious,   StumbleUpon

Follow iClarified:
Facebook,   Twitter,   LinkedIn,   Google Plus,   Newsletter,   App Store,   YouTube

Advertise Here

[HELP]Im really having trouble dual booting this hackintosh and I really need some help

SPECS: -Mobo: MSI B250M Gaming Peo -CPU: Intel Core i5-7500 -GPU:MSI GeForce GTX 1060 6 GB Overclock Edition

ISSUE: Ok so ive basically followed every video possible and nothing seems to work, could someone here just give me a guide that could possible help or maybe een some tips. Everytime I pop the USB in and try to boot from it I get an error saying Operating System Not FOund. I currently have Windows installec on an SSD, Games installed on a 1TB HDD, and I have another 1 TB HDD Attached which I was hoping to install Mac OS High Sierra on. Thank you in advance for any hep ive been trying to set up a hackintosh for like 5 years now and now that Ive built this PC (been trying it on laptops before) its really irritating me that I can't do it.

submitted by /u/TheCodeinePlug
[link] [comments]

Need some help installing HS. Fairly new so please don't judge.

have already tried following guides like the Vanilla Install guide (https://www.reddit.c..._brief_vanilla/) stickied to the sidebar, as well as looked for help throughout their discord server, but have come across so many errors and not enough help. My specs are as follows:

PC: Lenovo H430

RAM: 6.00GB Dual-Channel DDR3

Graphics: GM-MATRIX-C, 1023MB NVIDIA Geforce GT 610

CPU: Intel Core i3 2130 (Sandy Bridge)

Motherboard: Lenovo Mahobay (Socket 0)

Storage Devices: 465GB Toshiba MK5055GSX (SATA) and 931GB Seagate ST1000DM003-9YN162 (SATA)

Audio: High Definition Audio Device, NVIDIA High Definition Audio

I have run into many issues getting help with and setting up the GT 610, as some say they can get it working, but many post/guides I have looked to are very confusing on how they did so. I'm doing this all in a High Sierra VM on Windows so it takes longer than usual sometimes, so please be patient.

I already have my USB with High Sierra ready (made with the "createinstallmedia" command). Any help would be appreciated thanks for your time.

To be more specific, if you would like to know what issues I ran into while following the guide I linked above; I followed just about everything (Disabling all checkboxes in both sections of ACPI in the config.plist Clover provides, using these kexts (, as well as setting up Clover the way the guide tells me for the USB, and still getting no success. Any help would be very much appreciated. Thank you.

submitted by /u/lilquezzi
[link] [comments]

Im new here, where do I start?

Hi everyone I got a Windows desktop and would like to dual boot it with mac osx. How can I do this is there some kind of guide I can follow to do this or is it different per processor/mobo.

I have a i7 7700K with a z720 mobo

Also I'm using dual 1920x1080 monitors if that matters


submitted by /u/fkkm
[link] [comments]

Sketch Integrates Apple's Official iOS UI Kit

The popular Sketch vector graphics editing app has announced the integration of Apple's official iOS UI Kit.

Apple’s design templates have always been the gold standard when it comes to iOS design resources and the obvious go-to when designing for iPhone or iPad. We’re really excited to say that we’ve integrated Apple’s iOS 11 design template into Sketch, and can now offer this invaluable resource as a built-in Library.

The Apple iOS UI library includes everything, from tab bars and status bars to buttons and switches, ready to be inserted into your latest designs. You can download the Apple iOS UI Library from the Libraries tab in Preferences and, when Apple updates their Document, you’ll be notified and can update your designs to the latest version.

Share Article:
Facebook,   Twitter,   LinkedIn,   Google Plus,   Email,   Reddit,   Digg,   Delicious,   StumbleUpon

Follow iClarified:
Facebook,   Twitter,   LinkedIn,   Google Plus,   Newsletter,   App Store,   YouTube

Advertise Here

Installing El Capitan - Not using custom memory pool?

Hi there,

I'm completely new to the wonderful world of Hackintosh and have been trying to install OS X El Capitan from my bootable USB. I've followed all of the steps in the vanilla guide, tweaked my BIOS, etc, but upon trying to load the installer (in -v mode), I get the message:

AptioMemoryFix(R12): Starting .IABootFiles\boot.efi AMF: Not using custom memory pool - Not Found

My PC then restarts.

Any advice on how to bypass this would be appreciated, thank you in advance!

My build: ASUS Z170-E Motherboard Nvidia GTX 1050 Ti Intel i7 6770k

submitted by /u/ST1CKYBUDDHA
[link] [comments]