Hello,

My mother board have two slot m.2, so my question is, do you know if there is any issue to use both to do a dual boot (MacOS & Windows) ?

There is any specific configuration to do that ?

​

best regards,

Hello,

I'm working on a ASUS Prime Z390-A MotherBoard.

My MacOS system is installed on a NVME M.2 SSD, and when I try to access to the UEFI during the boot, I've a black screen and I can't access to the UEFI.

When I remove the SSD M.2, it works fine.

Do you have an idea why I have this issue ?

Many thanks

Hey guys, looking for help getting Mojave up and running on my A10-7850k build... I had high Sierra 10.13.3 working on this build but got a faster SSD and would like to upgrade to Mojave this time. Any help would be appreciated!

CPU: AMD A10-7850K GPU: NVIDIA GTX 760 MB: Gigabyte F2A78M-D3H Ram: 8GB DDR3

Hello,

I followed the guide for OpenCore Vanilla Guide. I have a AMD Ryzen 5 2600 with a RX 580 Graphics card.

I noticed that the AMD Ryzen configuration includes support for Catalina. Does that mean that I will be able to upgrade to Catalina pretty easily?

Also, do you guys know if the Kexts will work with Catalina. AppleALC, VirtualSMC, Lilu, WhateverGreen, and RTL8111 ?

Thanks a lot!

Old thread was closed, but I wanted to update on this device. I am successfully running the latest Catalina beta 10 with full trackpad support, audio, video (intel 630), and bluetooth/wifi (with DW1560 swap). There is an issue at boot where you have to wait exactly 3 minutes before the backlight initializes, but it's a minor annoyance to say the least. EFI I'm using (https://gofile.io/?c=75O4F8)

Hello, I have tried to install macOS Mojave on my Levovo TS440. I used Clover Boot loader and everything went successful but it freezes on the apple logo. I dont know what is wrong but I do really need help. I am new to all of this and have been struggling for months now. I would like to know how to get past the apple logo and how to enable imessage and everything else. I plan on using this for my YouTube channel. Thank you so much in advance! :)

Specs

Lenovo ThinkServer TS440

Intel Xeon CPU E3-1225 v3 @ 3.20 GHz

12 GB

64 Bit os

Legacy BIOS

Graphics: Nvidia GeForce GTX 750 Ti

A huge thank you to a redditor here inside of this r/hackintosh group for walking me through and helping me get my Vanilla Mojave setup.

Unfortunately, one issue is that during start up, the screen hangs after some string of text. It hangs on this screen for 30-45seconds.

Here's the video:
https://photos.app.goo.gl/JTT1j9S9G3foqeuJ6

Could it have something to do with my audio? As I see the word Audio in there.

​

Build:

CPU: Intel Core i7-4790K 4 GHz Quad-Core Processor

Motherboard: Gigabyte GA-Z97X-UD3H-BK ATX LGA1150 Motherboard

Memory: Crucial Ballistix Tactical 16 GB (2 x 8 GB) DDR3-1600 Memory

Storage: Samsung 850 EVO-Series 250 GB 2.5" Solid State Drive

Video Card: MSI Radeon RX 570 4 GB GAMING X Video Card

Power Supply: Corsair RM 650 W 80+ Gold Certified Fully Modular ATX Power Supply

Wireless Network Adapter: TP-Link TL-WDN4800 PCIe x1 802.11a/b/g/n Wi-Fi Adapter

Hi all, Would love if someone can point me in the right direction on how to understand clover configurator and in case anyone own a healthy Asus prime deluxe hackintosh shares his/her efi folder.

​

im currently running Mac 10.14.6 but with some issues like sleep freeze and improper usb patch.

Hello everyone! I have a hackintosh that I use for programming/app development. With the release of xCode 11, One requires to have macOS Catalina or Mojave as minimum OS requirement. Right now, I am using High Sierra. I waited all this time for new nvidia drivers but there seems to be no update about it. So my question is if I upgrade to Catalina, Will the integrated Intel graphics be good enough for development? Thanks!

All of my work related apps got updates recently and they all ask me to update from 10.14.3 to 10.14.4, how do i go the safe route? i dont have any external disks to backup all my stuff to, im using Lenovo G510 laptop with dual booted Win10 and Mojave 10.14.3

I have read lots of articles and watched a bunch of videos, but I am unable to get an OpenCore USB to even boot my system.

​

I'm trying to understand the process from start to finish for any system. From identifying the hardware to creating the DSDT and editing the config.plist.

​

Most of the guides that I have seen don't give you enough information to do the whole process, they leave out 8-10 essential steps. Does anybody know of a detailed step by step guide that helps you get all of the information about what Kexts you need and the DSDT settings, etc that you need to get OpenCore working?

​

Thanks in advance.

Hi I’m new the the whole Hackintosh thing and have a Windows 10 laptop that I want to run Mac OS Mojave on. Can someone help me with this.

Since last night, my WiFi has been disconnecting and cannot connect at all if i connect a second display. Restart or shutdown completely then start doesn’t change anything. Unplugging the second display brings back WiFi.

My WiFi card is bcm94360cs2 which I believe is from an iMac.

Any ideas on how to diagnose? Thanks

http://chng.it/HjqtBKqk8w

So I have an m.2 WiFi/BT adapter arriving originally for my hackintosh laptop however I don’t need it for that anymore as my dad is now using that laptop with windows.

I am going to use it in my desktop but I’m having trouble finding an antenna with pcie bracket. I seem to only find antennas with the cables but no bracket for the case.

My PC has m.2 which is why. - live in the UK

Can anyone recommend an m.2 adapter or antenna with bracket etc

Help would be appreciated

Hello.

I used tonymac forums to convert my Dell Optiplex. There is a very specific Mojave guide for the model I own (https://www.tonymacx86.com/threads/guide-install-high-sierra-or-mojave-on-the-dell-optiplex-7010-9010-desktop-pc-revision-ii.251736/) and I was able to upgrade from Mojave 10.14.5 to 10.14.6 without anything breaking.

I've been using this hacky for almost two months now without any big issues.

My rig is 3570k/16GB/HD4000 and I consider going the Vanilla route but since there is such a specific walkthrough already and all of the kexts gathered in one place, will it be worth it? I've already bought some MAC-specific software and would like to continue onwards to Catalina if it's possible - meaning I'm probably in for the long run.

I'm new to the reddit hackintosh community so tell me if i got something wrong.

I tried editing my DSDT to support the battery level both manually and with a patch that matched with the configuration of my laptop. In both cases the ACPI screws up and stops reporting battery level (at 100 all the time) and estimated time on battery at firmware level( I mean it stops working even on Windows and Linux 100% not discharging at all on both, i need to force a shutdown by firing up the CPU and the two GPUs at maximum rate on battery, then the ACPI somehow restores itself and works on the other OSes). It happens every time I boot with these DSDT. I was using the patched DSDT in conjunction with the ACPI patch kext.

​

My specs:

• CPU: Intel Core i7-6700HQ @ 3.500GHz
• GPU: Intel HD Graphics 530 + Nvidia GeForce GTX 960m 4GB (Disabled trough clover hotpatch)
• RAM: 16 GB (8+8 Hynix)
• Motherboard/Laptop model: Hp Pavilion 15-bc014nl (X0M38EA)
• Audio Codec: Realtek + AppleAlc with layout id: 13
• Ethernet Card: Realtek RTL8111
• Wifi/BT Card: (if available)
• What guide/tool followed: RehabMan's Battery Indicator Guide (DSDT Patching) + MaciASL
• What part I got an issue with: Battery indicator always at 100% every time I boot MacOs with patched DSDT, screws up ACPI in any OS
• What files/config I am using: Clover hotpatch: disable nvidia gpu + skylake framebuffer fix
• Extra Info: [Add something you need to point out about your setup]

downloading this https://support.apple.com/kb/DL2010 basically how do i make it as an .app in applications folder? i tried dragging it, extracting but didn't work,

what the heck?

• CPU: Intel i7-9700K
• GPU: Integrated
• Motherboard/Laptop model: Gigabyte Z390 Aorus Pro

So I built a successful Hackintosh and everything is working fine, except now when I try to connect to my raven Mti2 (https://slatemt.com/raven-mti2/) with HDMI, it goes through the Apple logo on boot, then just cuts to a completely green screen? I am really stuck on this one because the machine works perfectly with any normal monitor, it just can't boot on this one. Does anyone have any ideas?

https://i.imgur.com/AuBnF2H.jpg

Now i’ve tried every post and guide and youtube video about how to fix iMessages and Facetime but none of them work. I’ve tried 3 different accounts but to no avail. I have a USB wifi dongle but i connect my laptop to the internet through Ethernet while setting up iMessage and still the same.

Laptop Specs: Acer Aspire E5-476G-37MH Intel Core i3 - 7130u Intel HD 620 8GB DDR4 Mojave 10.14.6

Hey everyone, I’m not super great at this and my attempts at Hackintoshing have so far failed. Would any of you be willing to help me out? Maybe setup a Clover EFI and config plist based off my gear, walk me through the UEFI BIOS settings? I’d appreciate it immensely!

I’m having a hard time doing this. Followed multiple guides with nothing but failure.

Man that stupid chrome bug fucked me in all directions. finally today i am back up and running after a week of toubleshooting hell. haha i just wanted to vent and offer help if any one else is still struggling. I know there was a fix presented but every time i have to go to terminal commands i get nervous and even with the fix i still was having problems. had to rebuild my system but didnt lose my data. and yes i have a weird build and it took me all week to get tb3 pascal gaphics and audio fixed.

Hello,

I have switched from FakeSMC to VirtualSMC and I have a Ryzen 5 2600 build. I was wondering if you guys could explain or maybe point me in the right direction.

I have added the VirtualSMC kext to my clover kexts/other/ folder. I'm trying to find out what these other kexts are used for and if I should include them in my kext folder.

SMCBatteryManager, SMCLightSensor, SMCProcessor, and SMCSuperIO

Also, what are the dylib files and do I need them for anything?

​

Thanks a lot!!

I love the apple aesthetic, but for my next machine I don’t want to cut up a cheese grater Mac while still hoping to wrap it in something sexy that screams Apple. I think that this is a list a lot of people could like and contribute to, and maybe there should a thread every year?

My current build is running Mojave in a Phanteks Evolv, and as much as I love it I’m ready to stare at something new.

Replies should probably include the motherboard form factor for others, but I honestly don’t care, my biggest needs as a developer are speed, high clocks and NVMe, if an ITX case is sexy enough I’ll forgo a GPU.

I have a build running Windows 10 currently and I'm interested in getting macOS as a second operating system on here. Full specs are below. I know that the 2080 is completely unsupported but would it be possible for macOS to use the Intel graphics on the mobo? Which of the MANY guides out there should I be following for this? Thanks everyone.

https://pcpartpicker.com/list/fMWXL2

So I need some help. What is the main difference and advantages as well as disadvantages of each? Like what can you get from a hackintosh that dual booting windows and mac os can't give you? As well as the other way around. And which is more preferable, sticking with dual booting or going for a Hackintosh?

I'm deciding whether to use an intel i-5 9400 or ryzen 5 2600 for the system with an rx580 gpu plugged in

Hello I would like to ask for help about my Acer aspire E5-575g-53vg laptop's keyboard

Specs

CPU - i5-6200U

GPU - intel 520 hd

RAM - 8GB

Trackpad - ELAN0501OS - Mojave 10.14.6

So I have problem with my laptop keyboard, otherwise everything works fine well if we exclude sleep(if anyone is able to help I will be glad) otherwise everything other works even the trackpad gestures with 3-4-5 fingers work properly

I will post a tree about my efi/clover/kext/other folder voodoo kext's and will post output from kextload grep Vood

VoodooI2C.kext

tree in kext/Other

│ └── Contents

│ ├── MacOS

│ └── PlugIns

│ ├── VoodooGPIO.kext

│ │ └── Contents

│ │ ├── MacOS

│ │ └── _CodeSignature

│ └── VoodooI2CServices.kext

│ └── Contents

│ ├── MacOS

│ └── _CodeSignature

├── VoodooI2CHID.kext

│ └── Contents

│ ├── MacOS

│ └── _CodeSignature

├── VoodooPS2Controller.kext

│ └── Contents

│ ├── MacOS

│ └── PlugIns

│ ├── VoodooPS2Keyboard.kext

│ │ └── Contents

│ │ └── MacOS

│ └── VoodooPS2Mouse.kext

│ └── Contents

│ └── MacOS

​

sudo kextstat | grep Vood

>! 37 1 0xffffff7f83b23000 0x6000 0x6000 com.alexandred.VoodooI2CServices (1) F3BFD6B7-4954-37D9-9FD8-62C26CCA2A9B <5 3>!<

>! 69 1 0xffffff7f83cef000 0x16000 0x16000 org.coolstar.VoodooGPIO (1.1) 9BDAA97D-8CE2-3564-AC3B-1973F15C0CD7 <12 6 5 3>!<

>! 70 1 0xffffff7f83d05000 0x2e000 0x2e000 com.alexandred.VoodooI2C (2.2) E876D798-DBE4-33B1-9517-36BF8723CC6B <69 55 37 13 12 6 5 3 1>!<

>! 82 0 0xffffff7f83d9d000 0x11000 0x11000 com.alexandred.VoodooI2CHID (1) 1DBBCEA4-2CA2-38A4-B0F4-B8ED9E4AC5AC <70 55 51 12 6 5 3>!<