Hi there,

I recently bought an ethernet driver for one of my computers due to its original ethernet port frying, and I was wondering on what driver is needed for this to function on Hackintosh. I've attached a link to the Ethernet network adapter card below:

https://www.startech.com/ca/Networking-IO/Adapter-Cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-Card~ST1000BT32

I can't get this working - last thing for my Hackintosh,

Any help would be greatly appreciated!!

Hi all,

I'd like to build a Hackintosh so I was looking at a 512gb Toshiba ocz rd400 512gb to use as my main hdd (since it's way easier to setup up than a Samsung 960EVO). My question is - does my motherbaord Gigabyte Z170X-Ultra Gaming M.2 support speeds that can be reached with a PCIE adapter?

Originally wanted to get an rd400 with a PCIE adapter but this is not possible yet in Europe (only 128gb and 1TB version are sold on amazon). Would it be possible to purchase only the PCIE adapter in the future?

Thanks.

Hi all,

I'd like to build a Hackintosh so I was looking at a 512gb Toshiba ocz rd400 512gb to use as my main hdd (since it's way easier to setup up than a Samsung 960EVO). My question is - does my motherbaord Gigabyte Z170X-Ultra Gaming M.2 support speeds that can be reached with a PCIE adapter?

Originally wanted to get an rd400 with a PCIE adapter but this is not possible yet in Europe (only 128gb and 1TB version are sold on amazon). Would it be possible to purchase only the PCIE adapter in the future?

Thanks.

Machine is: Intel Core 2 Dueo E8500 + Intel MOBO DG41TY + Nvidia 8400

Screen shot of error. http://i.imgur.com/9cKFl25.jpg

Any advice would be GREATLY appreciated!

Hi /r/hackintosh, I just finished installing Sierra to my NUC and finally got it to boot properly (or so i think). However I am running into an issue when trying to run iMovie (the sole reason for building the hackintosh). iMovie is telling me the video mode is not supported because hardware acceleration is not enabled.

I've done a bit of googling where people on the TonyMacX86 forum ask if QE/CI (quartz extreme, and core image) are running. I am assuming these are the equivalent of video drivers for the mac OS. I have noticed the screen tearing and ghosting that this article references. http://tonymacx86.blogspot.com/2009/12/enable-full-graphics-card-acceleration.html

Can anyone provide me with some direction to resolve this?

Specs:
Intel NUC 6I5SYH w/ Intel Iris 540 graphics and dual core i5 processor
16GB (2x8) 2133 Kingston HyperX SODIMM ram
250GB SATA III Kingston SSD
Running latest clover, unibeast and multibeast
Mac OS Sierra 10.12.5?

I'm trying to install Sierra on this, however, it panics once loading to the installer.

Any ideas?

Hi guys,

I have a perfectly working hackintosh; I followed this guide because I have the same motherboard, and everything has been working flawlessly. Took a little while to get iMessage set up, but it all works great; continuity and handoff work great.

I got this webcam yesterday and figured it should be plug and play and video works great! However, the audio is WEIRD. For me, I hear my wife's voice as super sped up and high pitched. She hears my voice as super slow and low.

Anyone have any idea why? I looked through the audio post on the sidebar, but I don't really understand what it means for editing ALC because I tried that before and I lost all audio capabilities. Also Hackintosher talks about how the kext he used for AppleAlcAudio or whatever is the older version but more stable, and it's worked fine for me no problems.

Thanks!

When I try to boot MacOS Sierra through clover, I get a panic error and reboot, even if I have safe mode and/or "don't reboot on panic" enabled. Can anyone help? Here's a picture of the error. http://imgur.com/ejbcttu

So I just completed my build with an i5 6500 and an ASRock 1060. Everything but iMessage works great. I noticed though when firing up a few games that performance was maybe about half of what I would hope to see even coming from Linux, as in the case of Civ6.

Should I just accept this as the norm?

Is there a way to Dual Boot on 2 different SSD with Clover ? (1SSD for MacOS, 1SSD for windows)

Once every 5 minutes my optical drive makes a starting sound which is really weird. It does it in Hackintosh only and also does it in Mac in VMware. It doesn't do it in windows..

So basically it's sounds as if something is touching the fan and it does it for a couple seconds. It does it once maybe every ten minutes. Here's the weird thing, it only does it in Mac. In fact not really even Hackintosh, it does it inside Mac in VMware as well. It never does it in windows. It's a very odd noise I can't tell if it's the fan or hard drive or what it's hard to describe

Hi r/hackintosh,

I just got the parts for building my very first budget Plex server/PC. I would like to make it into a Hackintosh if possible.

Here's the build:

PCPartPicker part list / Price breakdown by merchant

So are these parts compatible with Mac OS Sierra? Am I gonna run into any problems? Appreciate any advice!

I want to run a MacOS Sierra/Windows 10 Dual Boot system (Windows for Gaming and Mac for Art and Animation) and Im going to use a single 240GB SSD partitioned in half to boot both of them but for storage what would be better? Two 1TB Drives (One for each OS) or One 2TB drive (Partitioned in half)

"OsxAptioFix2DRV: Starting overrides for /system/Library/CoreServices/boot.efi Using reloc block: no, hibernate wake: no +++++++++++++++++++++++++++++++++++++

Here is my EFI https://drive.google.com/file/d/0B2HzkEXnY7mtenV3cHYyUlpfVnc/view?usp=sharing

Machine's specs: Asus 270-p Intel 7700k Kaby Lake I7 Nvidia GTX 1050 16GB of DDR4 memory

I've been working on Hackintosh's for a week, but I run into this error sooooo much. I can't figure it out since it doesn't show me any specific issue.

Any help would be GREATLY appreciated!!!