Guide to Installing macOS Sonoma on a Dell XPS 9560 with OpenCore

The information provided in the documents does not contain specific details about installing macOS Sonoma on a PC with the mentioned specs. However, based on general Hackintosh knowledge, here's a guide and title that you may find helpful:

Hackintosh Solution Guide:

Step 1: Hardware Compatibility

• Before starting, verify the compatibility of your laptop's components with macOS Sonoma. The Intel i7 7700HQ and HD Graphics 630 should be compatible, but NVIDIA graphics will not work due to lack of support in macOS.

Step 2: Gather Necessary Files

• Download the latest version of OpenCore suitable for macOS Sonoma.
• Obtain the necessary kexts (e.g., Lilu, WhateverGreen, VirtualSMC, USBMap, etc.) and SSDTs for your system.

Step 3: BIOS Settings

• Update your Dell XPS BIOS to the latest version.
• Configure the BIOS settings according to Hackintosh best practices: disable Secure Boot, enable AHCI, set the correct DVMT pre-allocated memory, etc.

Step 4: Create USB Installer

• Use a real Mac or a macOS virtual machine to create a bootable USB installer for macOS Sonoma.
• Format the USB drive with a GUID Partition Table (GPT) and use the createinstallmedia command to make the installer.

Step 5: Prepare EFI Folder

• Set up your EFI folder on the USB drive with the OpenCore bootloader, kexts, and SSDTs.
• Ensure your config.plist is correctly configured for your specific hardware.

Step 6: Install macOS

• Boot from the USB installer and install macOS Sonoma onto your SSD. During the installation, your computer will restart several times.

Step 7: First Boot and EFI Transfer

• After the installation, boot from the USB again and transfer the EFI folder from the USB to the EFI partition on your SSD.

Step 8: Post-Installation Setup

• Install any additional kexts you may need for functionality (e.g., for audio or Ethernet).
• Configure your system preferences and make any necessary tweaks for power management, display resolution, etc.

Step 9: Resolve Wi-Fi and Graphics

• Since the NVIDIA GPU won't work, ensure that your Intel HD Graphics 630 is correctly set up.
• For Wi-Fi, since the internal card won't work, using a compatible USB dongle is a good solution. Make sure you have the correct drivers for your dongle.

Step 10: Testing and Troubleshooting

• Test all hardware components to ensure they're working correctly.
• If you encounter issues, use the verbose boot mode to diagnose problems and consult Hackintosh forums for solutions.

Step 11: Software Updates

• Before attempting any macOS updates, always back up your working EFI and check the Hackintosh community for any potential issues with updates.

Conclusion: This guide provides an overview of the steps needed to install macOS Sonoma on a Dell XPS 9560. Keep in mind that a Hackintosh requires ongoing maintenance and might present challenges with future macOS updates or with certain types of software. Always back up your data and EFI folder regularly to avoid data loss.