Hi everyone, hope you're doing great.
I'm trying to setup a Hackintosh on one of my HP Laptop through the Dortania guide with OpenCore 1.0.0 (The hardware references will be just under).
Hardware :
- Laptop reference : HP Pavilion 14ce0000ne
- CPU : intel i7-8550U - Kaby Lake
- RAM : 16GB - DDR4 @ 2600MHz
- iGPU : Intel UHD Graphics 620
- dGPU : Nvidia MX150
- Motherboard : Intel DMI 3.0
- Laptop : Hp Pavilion Laptop 14-ce0000ne
- Keyboard : Standard PS/2 Keyboard
- Touchpad : Synaptics SMBus ClickPad
- Audio #1 : Realtek ALC295 @ Intel Sunrise Point-LP PCH
- Audio #2 : Intel Kaby Lake HDMI @ Intel Sunrise Point-LP PCH
- Ethernet : Realtek RTL8168/8111 PCI-E
- WiFi : Intel Dual Band Wireless-AC 7265
- SSD : LITEON CV8-8E128-HP
- HDD : WDC WD10SPZX-60Z10T0
SSDTs used (by using SSDTTimer to map everything required on the target machine) :
- EC
- HPET
- PLUG
- PNLF
- USB-RESET
- USBX
- XOSI
KEXTs Used :
- Airportltlwm
- AppleALC
- BlueToolFixup
- BrightnessKeys
- ECEnabler
- IntelBluetoothFirmware
- IntelBluetoothInjector
- IntelBTPatcher
- Lilu
- NVMeFix
- RealtekRTL8111
- SMCBatteryManager
- SMCProcessor
- SMCSuperIO
- UTBMap
- VirtualSMC
- VoodooPS2Controller
- VoodooRMI
- WhateverGreen
I used macrecovery.py to grab the recovery data of the following OS:
- Monterey
- Ventura
- Sonoma
Sonoma : is giving me the crossed grey circle and the logs tells me the Mac OS X version is not compatible
Ventura boots up the installation process and instantly reboots
Monterey loops on itself with error logs.
Attached the logs for Monterey : https://pastebin.com/vfDffNB6
Attached logs for Sonoma : https://pastebin.com/9m4pBmi8
Ventura didn't produce any logs due to the instant restart of the machine.
I don't know if config.plist are allowed (or should even be posted on the forum) , if so I can provide if required.
I'm a bit at a loss currently, I was trying to get Sonoma to work with my machine ,but the unsupported error threw me out.
If anyone has any idea of a possible course of action that would be great. Thanks in advance !

Post a Comment