CPU: i7-8700
Motherboard: Gigabyte z390 ud
GPU: Sapphire Pulse rx580 8gb ddr5
RAM: Gskill 2400 32gb
SSD: 1x Samsung 860 Evo 500gb
1x Samsung 860 Evo 1tb
PSU: Corsair RM650
Monitor: Apple cinema display 21inch (just to set up, not sure if permanent)
So let me first say that I got Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave to install 1 time following [this](https://www.insanelymac.com/forum/topic/337183-guide-Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave-on-gigabyte-z370n-i7-8700k-radeon-rx-580/) guide. However the ethernet and audio weren't working so I decided it would be a good idea to delete everything I had done, including all SSDs and the Bootable USB. Boy was I wrong...
Now when I do the exact same process in the above linked Hackintosh guide I get to the screen just after the first clover boot screen, that just says "Boot macOS Install from Install macOS Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave". I hit enter and then it does [this](https://imgur.com/F1xbLtz). I can't get past either of these screens, the first that ends with "can't allocate runtime area' pops up way more often than the "HID: legacy shims 2" does. It never get further than "HID"
Again everything in the [guide](https://www.insanelymac.com/forum/topic/337183-guide-Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave-on-gigabyte-z370n-i7-8700k-radeon-rx-580/) above worked for me the first time, after uninstalling it and trying again from scratch it won't let me boot to Mac OS Success' href='/2020/12/install-macos-mojave-on-supported-pc.html'>Mojave without failing.
Is there a better way to do this for my set up, I've done 2 day of looking and haven't found anything concrete on my build. All the guides I've found are from before Clover_v2.5k_r5018, so i don't know what files line up with the older ones in the guides. Would something similar work?
I also can't seem to find any guides that agree on what .kexts to use to get this to work, so if any of have experience with any of my parts please let me know.
On a side note I also can't seem to download the latest version of Clover Configurator Version: 5.4.5.0 so I've just been using version 5.4.1.1 instead. Is that a bad idea?
I've tired everything I can find and now I don't know what's right or wrong or how I should be doing any of this. I feel like my head is spinning off after all this reading. And I don't know where i should even start anymore. PLEASE I would absolutely love some help here.
Send help.....
Post a Comment