iATKOS S3 v2.0 - Snow Leopard 10.6.6 - Running with AMD Phenom









Athlon X2 Dual Core





Soporta los Siguientes Hardware



4 comments :

  1. hola me gustaria me regalaras los link correctos ya que estos ya no existen mi correo es WWW02STER@GMAIL.COM

    ReplyDelete
  2. Hola, excelente aporte, muchisimas gracicias, tendras el Link en Torrent ya que los links estan caidos.
    Saludos

    Mi Correo ameno@hotmail.it

    ReplyDelete
  3. Como puedo conseguir los links, me gustaría experimentar, krauser.diosdelared@gmail.com

    ReplyDelete
    Replies
    1. iATKOS S3 v2.0 is a custom-made operating system based on Snow Leopard 10.6.6 that is designed to run on AMD Phenom processors. It is a free and open-source operating system that is not officially supported by Apple.

      To install iATKOS S3 v2.0 on an AMD Phenom processor, you will need the following:

      * A computer with an AMD Phenom processor
      * A USB drive with at least 8GB of storage space
      * The iATKOS S3 v2.0 installer

      Once you have all of the necessary files, follow these steps to install iATKOS S3 v2.0:

      1. Download the iATKOS S3 v2.0 installer from the iATKOS website.
      2. Create a bootable USB drive with the iATKOS S3 v2.0 installer. You can use a program like Etcher to create a bootable USB drive.
      3. Boot your computer from the USB drive. When you turn on your computer, press the appropriate key to enter the BIOS. This key is usually F2, F10, or Delete.
      4. Change the boot order in the BIOS so that the USB drive is the first device to boot from.
      5. Save your changes and exit the BIOS. Your computer will now boot from the USB drive.
      6. Follow the installer instructions. The installer will guide you through the installation process.
      7. Once the installation is complete, restart your computer.

      iATKOS S3 v2.0 is now installed on your computer. You can start using it right away.

      Here are some additional tips for installing iATKOS S3 v2.0 on an AMD Phenom processor:

      * Make sure that your computer meets the minimum system requirements for iATKOS S3 v2.0. You can find the minimum system requirements on the iATKOS website.
      * You may need to install additional drivers after iATKOS S3 v2.0 is installed. You can find these drivers on the manufacturer's website.
      * iATKOS S3 v2.0 may not support all features on your computer. For example, you may not be able to use the Touch Bar or the Touch ID sensor.

      If you have any problems installing iATKOS S3 v2.0, you can contact the iATKOS support team for help.

      Delete