RX560 can be successfully activated in a bare metal hackintosh with clover, but in an virtualized Mojave under ESXI 6.7, it cannot be properly activated, it can be identified in system information as a RX560 when Lilu and Whatevergreen kext is installed. Then I tried Clover 4910 (choose boot from Clover install disk in EXSI BIOS) with the ATI injection and Radeon deinit option enabled, but still no success, by checking the boot log, there is below related information:
13:483 0:000 === [ RestSetup macOS ] ===================================
13:483 0:000 RCBA disabled; cannot use it
13:489 0:005 Framebuffer @0xC0000000 MMIO @0xD0000000 I/O Port @0x00002000 ROM Addr @0x00000000
13:489 0:000 PCI region 1 = 0x00000000, region3 = 0x00000000, region5 = 0xFDA00000
13:489 0:000 Use region5 as MMIO space
13:489 0:000 BIOS_0_SCRATCH=0xFFFFFFFF, 1=0xFFFFFFFF, 2=0xFFFFFFFF, 3=0xFFFFFFFF, 4=0xFFFFFFFF, 5=0xFFFFFFFF, 6=0xFFFFFFFF
13:489 0:000 RADEON_CRTC2_GEN_CNTL == 0xFFFFFFFF
13:489 0:000 card not posted because GEN_CNTL = -1
13:489 0:000 ATI card non-POSTed,
13:489 0:000 Set VRAM for Baffin =4294967295Mb
13:489 0:000 ATI: get_vram_size returned 0xFFF00000
13:489 0:000 Users config name Acre
13:489 0:000 (AtiPorts) Nr of ports set to: 3
13:489 0:000 ATI Baffin AMD Radeon Pro 555 -1MB (Acre) [1002:67EF] (subsys [1002:0B04]):: PciRoot(0x0)\Pci(0x17,0x0)\Pci(0x0,0x0)
13:489 0:000 Device 1 deinited
13:492 0:002 stringlength = 2602
13:492 0:000 CurrentMode: Width=1280 Height=1024
Any suggestions to continue and fix the issue?
[link] [comments]
Post a Comment