tag:blogger.com,1999:blog-24997923464222873302024-03-19T06:02:18.617+03:00iATKOS InsideInstalling macOS on PC: A Step-by-Step GuideUfuk Durgunhttp://www.blogger.com/profile/07778333728378926166noreply@blogger.comBlogger746125tag:blogger.com,1999:blog-2499792346422287330.post-30647417387891313492024-01-30T14:53:00.002+03:002024-01-30T22:19:25.024+03:00Troubleshooting macOS Catalina Installer Boot Failure<div class="markdown prose w-full break-words dark:prose-invert dark"><p>Guide:</p><p>If you're encountering issues reaching the installer page for macOS Catalina despite successful installations of previous macOS versions like High Sierra or Mojave, follow these troubleshooting steps to address the problem:</p><p><strong>1. Verify USB Installer Integrity:</strong></p><ul><li>Ensure that your macOS Catalina installer USB drive is created correctly using a genuine macOS Catalina image and tools like createinstallmedia or gibMacOS.</li><li>Double-check that the USB drive is formatted appropriately (Mac OS Extended (Journaled) or APFS) and has the necessary EFI partition for booting.</li></ul><p><strong>2. USB Port and Drive Compatibility:</strong></p><ul><li>Test different USB ports on your computer to rule out any compatibility issues with specific ports.</li><li>Try using a different USB drive if possible, as some drives may not be compatible with macOS booting requirements.</li></ul><p><strong>3. Boot Flags and Bootloader Configuration:</strong></p><ul><li>Review the boot flags you've added, such as npci=0x3000, and experiment with alternative flags or combinations to see if they resolve the booting issue.</li><li>Check your bootloader configuration (e.g., OpenCore or Clover) and ensure that it is set up correctly for macOS Catalina. Verify that necessary ACPI patches, kexts, and drivers are configured appropriately.</li></ul><p><strong>4. Verbose Mode Analysis:</strong></p><ul><li>Analyze the verbose mode output to identify any specific error messages or points of failure during the boot process.</li><li>Look for any error messages related to kernel panic, ACPI issues, or disk I/O errors, which could provide clues to the underlying problem.</li></ul><p><strong>5. BIOS/UEFI Settings:</strong></p><ul><li>Access your computer's BIOS or UEFI settings and ensure that it is configured correctly for Hackintosh installation.</li><li>Check for settings related to virtualization (VT-x), Secure Boot, SATA mode (AHCI), and any other relevant options. Make necessary adjustments as per Hackintosh installation requirements.</li></ul><p><strong>6. Hardware Compatibility:</strong></p><ul><li>Verify that your computer's hardware components, including CPU, GPU, and motherboard, are compatible with macOS Catalina. Consult Hackintosh compatibility lists and forums for guidance on specific hardware compatibility issues.</li></ul><p><strong>7. Community Support and Troubleshooting:</strong></p><ul><li>Seek assistance from online communities and forums dedicated to Hackintosh, such as Reddit's r/Hackintosh or InsanelyMac forums. Provide detailed information about your hardware configuration and troubleshooting steps taken for more targeted assistance.</li></ul><p>By following these troubleshooting steps and leveraging community support from Hackintosh forums, you can diagnose and address the boot failure issue to successfully reach the installer page for macOS Catalina on your system.</p></div>
<div id="tm-catalina">Unable to Reach Installer
<div class="bbWrapper">I'm unable to reach the installer page for macOS Catalina. I have not had this issue for High Sierra, or Mojave. I have tried with both a USB 2.0 and 3.0 drive, as well as 2.0, and 3.0 ports. Both interchangeably, and both with no luck. My installer USB is a vanilla UniBeast. The only additional boot flag I've added is npci=0x3000. Verbose mode halts at this:</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: Noona</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/unable-to-reach-installer.328830/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-39649014120301665682024-01-30T12:53:00.001+03:002024-01-30T12:53:36.482+03:00Restoring Preboot volume from ok working Backup drive. 10.15.7<div id="tm-catalina">
<div class="bbWrapper">Hi guys, I’ve had a working 10.15.7 Catalina install for a couple years on a 3.7Ghz Core i9 10900k, (and I still want to stay in Catalina, I don’t want to update OS yet), done with OpenCore 0.6.9 (which I haven’t updated it yet either as everything was working)<br />
<br />
Yesterday when I Shutted down, it seems like somehow a system update started, even if I have updates OFF. Anyway the apple and the progress bar appeared, was taking way too long so I realised it might be updating, and I decided to...<br />
<br />
<a href="https://www.tonymacx86.com/threads/restoring-preboot-volume-from-ok-working-backup-drive-10-15-7.328829/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: basuruza</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/restoring-preboot-volume-from-ok-working-backup-drive-10-15-7.328829/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-78521273075300187652024-01-21T23:53:00.002+03:002024-01-22T18:18:13.974+03:00Troubleshooting OpenCore 9.6 Debug Installation Error for macOS Catalina<div class="markdown prose w-full break-words dark:prose-invert light"><p>Facing installation issues during a Hackintosh setup, especially for beginners, can be quite challenging. The error message "macOS could not be installed on your computer" during the Catalina installation indicates a problem that could be related to several factors, such as your EFI configuration, hardware compatibility, or the installation media itself. Let's go through some steps to troubleshoot this:</p><h3>Guide Step by Step:</h3><ol><li><p><strong>Verify Your EFI Folder</strong>:</p><ul><li>Ensure that your EFI folder is correctly set up for your specific hardware. Since you're using OpenCore 9.6 Debug version, make sure all the kexts, drivers, and ACPI patches are compatible with Catalina and your hardware.</li><li>Pay special attention to the config.plist file. Validate it using OpenCore's configuration checker to ensure there are no syntax errors or misconfigurations.</li></ul></li><li><p><strong>Create a Fresh Installer</strong>:</p><ul><li>Sometimes, the issue can be with the installation media. Create a new Catalina bootable installer using a reliable guide, ensuring that the macOS version you download is not corrupted.</li></ul></li><li><p><strong>Check Date and Time</strong>:</p><ul><li>You've already tried changing the date and time, which is good. Ensure the date is set to a period when Catalina was still being signed by Apple.</li></ul></li><li><p><strong>Hardware Compatibility</strong>:</p><ul><li>Since you mentioned potential issues with your motherboard, ensure that other components like CPU, GPU, and RAM are also compatible with Catalina.</li><li>Disable any unnecessary hardware in BIOS that might cause conflicts (e.g., onboard WiFi/Bluetooth if not compatible).</li></ul></li><li><p><strong>BIOS Settings</strong>:</p><ul><li>Since you're using legacy boot, ensure that your BIOS is correctly configured for a Hackintosh setup. This includes settings like AHCI for SATA, disabling VT-d, and other relevant configurations.</li></ul></li><li><p><strong>Check Logs</strong>:</p><ul><li>OpenCore DEBUG version should generate logs. Check these logs to identify where exactly the installation is failing. This can provide specific clues about what might be going wrong.</li></ul></li><li><p><strong>Test with a Different USB Port</strong>:</p><ul><li>Try using a different USB port, preferably a USB 2.0 port, as they tend to have better compatibility during installation.</li></ul></li><li><p><strong>Minimal Kexts and Drivers</strong>:</p><ul><li>Start with a minimal set of kexts and drivers necessary for booting and installation. You can add additional kexts and drivers after successfully installing the OS.</li></ul></li><li><p><strong>Internet Connection</strong>:</p><ul><li>While you've tried unplugging the ethernet, sometimes having an active internet connection during installation can help, especially if macOS needs to download additional components.</li></ul></li><li><p><strong>Seek Community Assistance</strong>:</p><ul><li>If you're still facing issues, consider seeking assistance from Hackintosh communities like tonymacx86 or Reddit's Hackintosh forums. Sharing your hardware details and EFI folder can help experienced members provide more targeted advice.</li></ul></li></ol><h3>Create config.plist:</h3><p>For Catalina installation issues, the config.plist file is crucial. Ensure that:</p><ul><li>The SMBIOS is appropriate for your system.</li><li>Kexts and drivers are correctly configured.</li><li>ACPI patches (if any) are suitable for your hardware.</li></ul><p>Remember, Hackintosh builds can be quite specific to the hardware used. The problems you're facing might be unique to your particular combination of components. If you continue to face difficulties, detailed information about your hardware could provide more insights into potential compatibility issues.</p></div>
<div id="tm-catalina">
<div class="bbWrapper">OpenCore Debug V9.6 Catalina failing at the beginning of installation after reboot<br>
This is my first hackintosh build and I'm relatively new so it took a while for me to get used to everything but now I'm running into a consistent problem that I haven't been able to fix no matter what I try. <br>
I can load the Boot picker, choose the USB installer and it loads up perfectly normal, but after the installation reboots once, it gets stuck at the beginning of the installation with the following error:<br>
<br>
macOS could not be installed on your computer<br>
An error occurred while loading the installer resources <br>
Quit the installer to restart your computer and try again.<br>
<br>
I've tried about almost anything by now: Changing the date and time to match and changing it to a date where catalina was still supported, disabling SIP, running the installer command in the Terminal, restarting the computer multiple times, disconnecting all other devices while installing, unplugging the ethernet, disabling secure boot<br>
<br>
I've also tried looking for this same exact issue on the forums, but none of the fixes seemed to work for me.<br>
<br>
I know that my MOBO might potentially have a few problems with macos but others seemed to have no problem when installing catalina. <br>
<br>
The only method that partially worked for me was disconnecting the drive and reconnecting it to my macbook and downloading it from there... which worked but when I tried using it on my computer I started having multiple issues, i.e., not being able to open applications at all or using my apple id, which is why I'm trying to install directly from my computer this time to see if I run into some other issues while installing.<br>
<br>
below is my EFI folder that I used for the installation (OpenCore 9.6 DEBUG Version)<br>
I used legacy booting becuase my motherboard's UEFI is very unstable and downright doesn't work most of the time. <br>
all ideas would be very appreciated.</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: Euscelis</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/opencore-debug-v9-6-catalina-failing-at-the-beginning-of-installation-after-reboot.328734/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-37884923563119347812024-01-18T01:53:00.002+03:002024-01-18T06:28:40.725+03:00Troubleshooting macOS Catalina Boot Issues with OpenCore EFI<div class="markdown prose w-full break-words dark:prose-invert dark"><p><strong>Guide:</strong></p><p><strong>Introduction:</strong>
Encountering boot issues with macOS Catalina on your Hackintosh running OpenCore can be challenging, but with systematic troubleshooting, you can identify and resolve the problem. This guide will help you step-by-step in troubleshooting and potentially fixing the boot problem.</p><p><strong>Requirements:</strong></p><ul><li>Computer with compatible hardware</li><li>macOS Catalina installation USB with OpenCore EFI</li></ul><p><strong>Step 1: Review Config.plist:</strong></p><ol><li>Open your config.plist file using a plist editor or text editor.</li><li>Verify that ACPI, Booter, DeviceProperties, Kernel, Misc, NVRAM, and PlatformInfo sections are configured correctly.</li><li>Check that your SMBIOS settings align with your hardware.</li></ol><p><strong>Step 2: Verify BIOS Settings:</strong></p><ol><li>Access the BIOS/UEFI settings on your computer.</li><li>Confirm that settings such as Secure Boot are disabled, and Boot Mode is set to UEFI.</li><li>Ensure that virtualization features like VT-d are disabled.</li></ol><p><strong>Step 3: Check USB Configuration:</strong></p><ol><li>Some systems require USB port mapping. Investigate USB port configuration using guides specific to your hardware.</li></ol><p><strong>Step 4: Boot Flags and Arguments:</strong></p><ol><li>Experiment with boot flags and arguments to troubleshoot. Common flags include <code>-v</code> for verbose mode and <code>-x</code> for safe mode.</li><li>Add necessary flags to your config.plist to address potential issues.</li></ol><p><strong>Step 5: Verify Kexts and Drivers:</strong></p><ol><li>Check that the necessary kexts are present in the EFI/OC/Kexts folder.</li><li>Ensure that your drivers (located in EFI/OC/Drivers) are compatible and up to date.</li></ol><p><strong>Step 6: Log Analysis:</strong></p><ol><li>Analyze your OpenCore log to identify any specific error messages during the boot process.</li><li>Look for clues about where the boot process fails and possible causes.</li></ol><p><strong>Step 7: Test Different macOS Versions:</strong></p><ol><li>If Catalina fails to boot, try testing with a different macOS version to see if the issue persists.</li><li>Some systems may have better support for specific macOS releases.</li></ol><p><strong>Step 8: Community Support:</strong></p><ol><li>Visit Hackintosh forums or communities to seek assistance.</li><li>Share details about your hardware specifications, config.plist, and any error messages encountered during boot.</li></ol><p><strong>Step 9: Reset NVRAM:</strong></p><ol><li>Reset NVRAM to clear any potential conflicts.</li><li>Check if this resolves the boot issue.</li></ol><p><strong>Step 10: Document and Seek Assistance:</strong></p><ol><li>Keep detailed records of your configuration changes and error messages.</li><li>If you're unable to resolve the issue, share this information on forums to get targeted assistance.</li></ol><p><strong>Conclusion:</strong>
Resolving boot issues with macOS Catalina on your Hackintosh requires a patient and systematic approach. By carefully reviewing config.plist, BIOS settings, USB configuration, and seeking community support, you can identify the cause and work towards a solution. Good luck with your Hackintosh project!</p></div>
<div id="tm-catalina">Catalina (with OpenCore EFI) will not boot on my computer.
<div class="bbWrapper">Hi there, my computer is unable to boot macOS Catalina for some reason and I am unsure why, The attachments I have attached is my OpenCore EFI stuff, and Log. Please help!</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: Luna</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/catalina-with-opencore-efi-will-not-boot-on-my-computer.328688/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-4798752569011605522024-01-11T04:53:00.001+03:002024-01-11T04:53:38.443+03:00stuck with black screen after Catalina update<div id="tm-catalina">
<div class="bbWrapper">I tried updating to Catalina without tidying up the EFI folder, and assuming I had the most-recent-back-then version of Clover, but I have the 2.4<br />
<br />
<br />
the still-Mojave-named boot from Clover launches the Apple logo, and the load animation goes all the way and gives me hope, but then moves on to a black screen.<br />
Same happens when launching recovery installs from Clover.<br />
I didn't keep my bootable USB key, so for now I'm stuck with black screens and not being able to run a terminal or post-intall...<br />
<br />
<a href="https://www.tonymacx86.com/threads/stuck-with-black-screen-after-catalina-update.328595/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: ferachoglou</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/stuck-with-black-screen-after-catalina-update.328595/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-81070223374749146502024-01-10T21:53:00.003+03:002024-01-11T02:03:43.865+03:00macOS Catalina Cleanup Guide: Removing Legacy Kexts and Rebuilding Kernel Cache<div class="markdown prose w-full break-words dark:prose-invert dark"><p>It seems like you've provided a detailed process for users who are updating their Hackintosh from macOS Mojave to macOS Catalina and need to clean up kexts (kernel extensions) that were previously installed in the /Library/Extensions directory. The process includes deleting the unnecessary kexts and rebuilding the system's kernel cache. Here's a concise version of the instructions provided:</p><p><strong>Guide Step by Step:</strong></p><ol><li><p><strong>Update to macOS Catalina:</strong></p><ul><li>Use UniBeast 10 to update your system to macOS Catalina.</li></ul></li><li><p><strong>Run MultiBeast 12:</strong></p><ul><li>After updating, use MultiBeast 12 for macOS Catalina to install all necessary post-installation items.</li></ul></li><li><p><strong>Remove Old Kexts:</strong></p><ul><li>Go to the /Library/Extensions directory and delete any third-party kexts that were installed by previous versions of MultiBeast or other methods.</li></ul></li><li><p><strong>Terminal Commands:</strong></p><ul><li>Open Terminal from /Applications/Utilities.</li><li>Gain superuser access by typing <code>sudo -s</code> and entering your password.</li><li>Execute <code>mount -uw /</code> to mount the filesystem as writable.</li><li>Update the system's kext cache by typing <code>touch /Library/Extensions /System/Library/Extensions</code>.</li><li>Rebuild the kext cache with <code>kextcache -i /</code>.</li></ul></li><li><p><strong>Reboot:</strong></p><ul><li>Restart your computer for the changes to take effect.</li></ul></li></ol><p><strong>Note on Kexts:</strong></p><ul><li>The script provided in your message, Beast-Clean.sh, automates the process of removing kexts installed by MultiBeast. Users can run this script with superuser privileges and specify their volume name to clean their /Library/Extensions directory.</li><li>It is normal to find <code>AppleMobileDevice.kext</code> and <code>EnergyDriver.kext</code> in your system as they are part of macOS and, in the case of <code>EnergyDriver.kext</code>, installed by the Intel Power Gadget.</li></ul><p><strong>Caution:</strong></p><ul><li>Users should always back up their current system before making changes like these, especially when removing kexts or updating macOS.</li><li>Proceeding with these steps can affect system stability if not done correctly. It's recommended for users to ensure they are comfortable with Terminal and understand the commands they are executing.</li></ul><p><strong>Additional Tips:</strong></p><ul><li>For any issues during or after the cleanup process, users should refer to Hackintosh communities and forums for support.</li><li>Keeping your EFI partition's backup before making changes is also a good practice, as it allows for easy restoration if something goes wrong.</li></ul><p>Please ensure you have a current backup before proceeding with these steps, as removing system files and altering kernel caches can potentially cause system instability if not done correctly.</p></div>
<div id="tm-catalina">macOS Catalina Cleanup: Remove Kexts From /Library/Extensions and Recache
<div class="bbWrapper">
<div style="text-align: center"><img src="https://www.tonymacx86.com/data/attachments/410/410638-a94294f86b2f00e76ca1d30653b8ad31.jpg" class="bbImage" style="" alt="MB-0.png" title="MB-0.png" width="400" height="325" loading="lazy" /></div>
For macOS Catalina, the site is changing our recommendations in regard to installing 3rd party kexts. We are changing the default location in MultiBeast from /Library/Extensions to /Volumes/EFI/EFI/CLOVER/kexts/Other.<br />
<br />
Moving from macOS Mojave to macOS Catalina with an existing MultiBeast 11 for macOS Mojave installation. The following directions allow a user to manually remove kexts from /Library/Extensions and recache system on macOS Catalina.<br />
<br />
<div style="margin-left: 20px">1. Update to macOS...</div>
<br />
<a href="https://www.tonymacx86.com/threads/macos-catalina-cleanup-remove-kexts-from-library-extensions-and-recache.293719/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: tonymacx86</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/macos-catalina-cleanup-remove-kexts-from-library-extensions-and-recache.293719/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-5110949892306977182024-01-02T13:53:00.001+03:002024-01-02T13:53:56.017+03:00Fresh install of macOS Catalina on a Lenovo M93P Tower (not Tiny)<div id="tm-catalina">
<div class="bbWrapper">I have Catalina (10.15.7) up-and-running with what seems to have the processor, disks, memory and GPU correctly identified / working (using UniBeast10.3.0 for Catalina)...However no Wi-Fi connectivity unfortunately.<br />
<br />
I am running a Broadcom BCM4352 802.11ac Wireless Network Adapter. I saw some old posts that suggested to download the following kexts:-<br />
OS-X-Fake-PCI-ID-master which when I unzip, has BroadcomWifiInjector.kext along with several other that are greyed out.<br />
<br />
Shouldn't MultiBeast...<br />
<br />
<a href="https://www.tonymacx86.com/threads/fresh-install-of-macos-catalina-on-a-lenovo-m93p-tower-not-tiny.328478/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: ken.collinsmontreal</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/fresh-install-of-macos-catalina-on-a-lenovo-m93p-tower-not-tiny.328478/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-53162164398858071122023-12-31T20:53:00.001+03:002023-12-31T20:53:28.701+03:00Cannot boot into macOS Installer.<div id="tm-catalina">
<div class="bbWrapper">Hi, I made my Unibeast USB with the EFI being Clover, but when I boot into the macOS Installer, I get no activity from the USB Drive, the screen is hanging at the Apple logo, and nothing else. My CPU is a 6 Core AMD Ryzen 5 5600x Processor and my GPU is an AMD Radeon RX 580.</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: Luna</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/cannot-boot-into-macos-installer.328442/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-5171135819094451542023-12-12T06:55:00.001+03:002023-12-12T06:55:49.249+03:00In MacOS hell - need more current version of TimeMachine restore<div id="tm-catalina">
<div class="bbWrapper">After years of flawless operation my hack hit a land mine this weekend. Been on Catalina with APFS booting a 5 year old Samsung 840 SSD. It got very flaky and unreliable on Saturday. Clover boots but shows no bootable drives. Finally decided to just restore time machine of the drive and re-clover a new drive. Now I find (of course) the 2014 version of Time Machine restore that I'm using from the Tonymac Mojave install thumbdrive doesn't know my Catalina backups are apparently split into...<br />
<br />
<a href="https://www.tonymacx86.com/threads/in-macos-hell-need-more-current-version-of-timemachine-restore.328199/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: pizzaguy</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/in-macos-hell-need-more-current-version-of-timemachine-restore.328199/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-20502489551547630302023-11-09T09:54:00.001+03:002023-11-09T09:54:02.864+03:00macos catalina installation<div id="tm-catalina">
<div class="bbWrapper">Hi, I have a problem: I'm trying to create a hackintosh with macOS Catalina. I followed the Opencore guide but you're out of the question: when the USB starts, macOS installation appears and when I select it, the Apple logo appears but then the PC restarts. can you help me ?</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: Nicche</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/macos-catalina-installation.327818/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-46707390049217700212023-10-31T02:54:00.001+03:002023-10-31T02:54:35.678+03:00Highpoint ssd7204 raid not working<div id="tm-catalina">
<div class="bbWrapper">Hi,<br />
<br />
Got an Asus Z270WS with Opencore 0.8 and a Highpoint SSD7204 that works with the Windows side of things but cant get the driver to recognize the card. At bootup each of the 4 nvme drives comes up but I choose to ignore them. Wonder what I have to do to get it working? Noticed that the 1.1.25 highpointnvme kext is loaded in kextstat. Maybe its the DSDT?<br />
<br />
Thanks</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: moheban79</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/highpoint-ssd7204-raid-not-working.322362/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-69031726634810567212023-10-27T02:55:00.001+03:002023-10-27T02:55:42.605+03:00Stuck with a black screen during install<div id="tm-catalina">
<div class="bbWrapper">Hi!<br />
I'm first time using opencore 0.9.5 with the official guide and few other guides.<br />
My setup is:<br />
MSI Z390-a pro<br />
i7 8700<br />
Asus RX 5700XT<br />
Installation stucked with a black screen (there's a signal, monitor is not swicthed off)<br />
Can you give me any advice, please?</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: chayanov23</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/stuck-with-a-black-screen-during-install.327641/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-73502474872298299812023-09-28T02:54:00.001+03:002023-09-28T02:54:23.437+03:00No Display Signal After Verbose - OpenCore<div id="tm-catalina">
<div class="bbWrapper">This is my first time trying to make a Hackintosh and I am trying to install OSX Catalina on my Dell Inspiron 3656 using OpenCore, but once it reaches the end of the verbose, there is no more display output. The computer is still running though, any suggestions?<br />
<br />
Specs:<br />
CPU - AMD FX-8800P<br />
GPU - AMD Radeon R9 360</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: DarkCat</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/no-display-signal-after-verbose-opencore.327305/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-2685672820635520152023-09-20T08:54:00.001+03:002023-09-20T08:54:58.335+03:00Can't boot after updating Clover to 5155<div id="tm-catalina">
<div class="bbWrapper">I have been searching the forum for some way to fix this.<br />
<br />
I was wanting to update Catalina from 10.11.6 to 10.11.7 and was following the instructions here: <a href="https://www.tonymacx86.com/threads/macos-10-15-7-update.303590/" class="link link--internal">https://www.tonymacx86.com/threads/macos-10-15-7-update.303590/</a><br />
<br />
I didn't seem to get very far - after backing up my HD, I went to update Clover. Update was installed sucessfully! I then went to reboot and now it just hangs at the Apple Logo. I may have messed up by updating the kext files mentioned before I did the Clover update...<br />
<br />
<a href="https://www.tonymacx86.com/threads/cant-boot-after-updating-clover-to-5155.327203/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: eklipse</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/cant-boot-after-updating-clover-to-5155.327203/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-14862118308421484212023-09-20T02:53:00.001+03:002023-09-20T02:53:35.604+03:00Making Bootable USB Drive for Catalina<div id="tm-catalina">
<div class="bbWrapper">Hey,<br />
I have a dumb issue at <a href="https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/" class="link link--internal">"Install macOS Catalina on Supported PCs": https://www.tonymacx86.com/threads/unibeast-install-macos-catalina-on-any-supported-intel-based-pc.285366/</a><br />
On step 2.11 : I see an icon Catalina, when I put my mouse on it tells me that it's to create a bootable USB drive...<br />
But I can't click on it, there is no way to pass this step.<br />
Can you guys help me?<br />
Joël</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: jojow</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/making-bootable-usb-drive-for-catalina.327197/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-10911053017961019532023-08-24T07:55:00.001+03:002023-08-24T07:55:03.225+03:00Optiplex 9020 Catalina USB ports not right<div id="tm-catalina">
<div class="bbWrapper">My Optiplex 9020 MT Catalina is working great except USB ports are not looking right<br />
<br />
Clover 4920 EFI folder copied from Mojave build of a 7010<br />
<br />
BIOS is A25<br />
<br />
Question:what kexts should I be using ? is there a BIOS setting I missed (EHCI hand off ?)<br />
<br />
Any help or guides that I Missed thanks</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: richardsstudio</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/optiplex-9020-catalina-usb-ports-not-right.326892/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-6682371821710372852023-08-15T15:53:00.002+03:002023-08-15T23:03:33.986+03:00Safari and Firefox crash on my MAG Z490 TOMAHAWK on Catalina<div id="tm-catalina">
<div class="bbWrapper"><span style="font-family: inherit;">Hi, I dont know what is wrong but safari and firefox not working on my z490 with Catalina. I use iMac20.1. I have this issu only on Catalina.<br />
<img alt="Capture d’écran 2023-08-06 à 13.53.05.png" class="bbImage" height="454" loading="lazy" src="https://www.tonymacx86.com/attachments/capture-de-cran-2023-08-06-a-13-53-05-png.570388/" title="Capture d’écran 2023-08-06 à 13.53.05.png" width="457" /><br />
<img alt="Capture d’écran 2023-08-06 à 13.51.58.png" class="bbImage" height="1358" loading="lazy" src="https://www.tonymacx86.com/attachments/capture-de-cran-2023-08-06-a-13-51-58-png.570387/" title="Capture d’écran 2023-08-06 à 13.51.58.png" width="1325" /></span></div>
<span style="font-family: inherit;"><img border="0" height="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" width="0" /></span></div>
<p class="tm-author"><span style="font-family: inherit;">Author: msh</span></p><p class="tm-author"><span style="font-family: inherit;"><br /></span></p><p class="tm-author"><span style="font-family: inherit;">SOLUTIONS:<br /><br /></span></p><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; background-color: #f7f7f8; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: #374151; font-size: 16px; margin: 0px 0px 1.25em; white-space-collapse: preserve;"><span style="font-family: inherit;">It's not uncommon to encounter software quirks and compatibility issues with Hackintosh setups, especially when mixing hardware and macOS versions that Apple doesn't officially support together.</span></p><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; background-color: #f7f7f8; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: #374151; font-size: 16px; margin: 1.25em 0px; white-space-collapse: preserve;"><span style="font-family: inherit;">Here are a few steps you can take to troubleshoot Safari and Firefox not working on your Hackintosh:</span></p><ol style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; background-color: #f7f7f8; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: #374151; counter-reset: list-number 0; display: flex; flex-direction: column; font-size: 16px; list-style: none; margin: 1.25em 0px; padding: 0px; white-space-collapse: preserve;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Ethernet and Network:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">macOS relies heavily on an active internet connection for many functionalities, including Safari.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Ensure your Ethernet (or Wi-Fi, if that's what you use) kext is correctly set up.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Check if the internet is working correctly in other apps.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Check your system's <code style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-code); font-size: 0.875em; font-weight: 600;">System Preferences -> Network</code> settings to ensure everything looks okay.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Update Kexts and Clover/OpenCore:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Make sure all your kexts are updated, especially <code style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-code); font-size: 0.875em; font-weight: 600;">Lilu.kext</code> and any network-related kexts.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">If you're using Clover, consider switching to OpenCore as it's more modern and offers better compatibility and support for newer hardware and software configurations.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Graphics Acceleration:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Both Safari and Firefox leverage hardware acceleration. If your GPU isn't correctly set up, this can lead to crashes or non-functioning applications.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Ensure that WhateverGreen is correctly set up and that you've set any necessary device properties or boot arguments for your GPU.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Clear Cache and Preferences:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">For Safari, go to <code style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-code); font-size: 0.875em; font-weight: 600;">~/Library/Caches/com.apple.Safari</code> and clear out the contents.</span></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">For Firefox, consider resetting it or deleting its cache.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">System Logs:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Check the system logs in <code style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-code); font-size: 0.875em; font-weight: 600;">Console.app</code> for any glaring errors when you launch Safari or Firefox. This can give you hints about what's going wrong.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Check for Software Conflicts:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">If you have any software or extensions that modify internet traffic (like VPNs, firewalls, or ad blockers), they might be causing the issue. Try disabling or uninstalling them temporarily to check.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Fresh Installation:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">As a last resort, consider doing a fresh installation of Catalina. Sometimes, installations can get corrupted or bogged down with lingering issues.</span></li></ul></li><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; counter-increment: list-number 1; display: block; margin-bottom: 0px; margin-top: 0px; min-height: 28px; padding-left: 0.375em;"><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; margin: 0px;"><span style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: var(--tw-prose-bold); font-weight: 600;"><span style="font-family: inherit;">Community Assistance:</span></span></p><ul style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: flex; flex-direction: column; list-style: disc; margin: 0px 0px 0px 1rem; padding: 0px;"><li style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; display: block; margin: 0px; min-height: 28px; padding-left: 0.375em;"><span style="font-family: inherit;">Reach out to Hackintosh communities like r/hackintosh on Reddit, InsanelyMac, or TonyMacx86 forums. Someone else might've encountered a similar problem with the same motherboard or macOS version.</span></li></ul></li></ol><p style="--tw-border-spacing-x: 0; --tw-border-spacing-y: 0; --tw-ring-color: rgba(69,89,164,.5); --tw-ring-offset-color: #fff; --tw-ring-offset-shadow: 0 0 transparent; --tw-ring-offset-width: 0px; --tw-ring-shadow: 0 0 transparent; --tw-rotate: 0; --tw-scale-x: 1; --tw-scale-y: 1; --tw-scroll-snap-strictness: proximity; --tw-shadow-colored: 0 0 transparent; --tw-shadow: 0 0 transparent; --tw-skew-x: 0; --tw-skew-y: 0; --tw-translate-x: 0; --tw-translate-y: 0; background-color: #f7f7f8; border: 0px solid rgb(217, 217, 227); box-sizing: border-box; color: #374151; font-size: 16px; margin: 1.25em 0px 0px; white-space-collapse: preserve;"><span style="font-family: inherit;">Remember, Hackintoshes are a bit of trial and error. The hardware and software combinations aren't officially supported by Apple, so some tweaking and patience is often required to get everything working seamlessly.</span></p><p class="tm-author"><span style="font-family: inherit;"><br /></span></p><p class="tm-author"><span style="font-family: inherit;"><br /></span></p><p class="tm-author"><span style="font-family: inherit;"><br /></span></p>
<div class="downloadb catalina"><a href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/safari-and-firefox-crash-on-my-mag-z490-tomahawk-on-catalina.326795/" target="_blank"><span style="font-family: inherit;">[► Source]</span></a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-84660173191839873842023-08-01T00:54:00.001+03:002023-08-01T00:54:35.577+03:00Intel NUC 10 Frost Canyon<div id="tm-catalina">
<div class="bbWrapper">Intel confirmed the release of NUC 10 “Frost Canyon” but it’s not yet available on the market:<br />
<br />
<a href="https://www.anandtech.com/show/15131/intel-confirms-comet-lakebased-nuc-10-frost-canyon-ucff-pcs" target="_blank" class="link link--external" rel="nofollow ugc noopener">2019-11-21 | Anandtech | Intel Confirms Comet Lake-Based NUC 10 ‘Frost Canyon’ UCFF PCs</a><br />
<br />
Anyone have any idea whether this will be Hackint0sh compatible? Wanted to try out an updated version of this build:<br />
<br />
<a href="https://youtu.be/tUUP8K3RqAo" target="_blank" class="link link--external" rel="nofollow ugc noopener">The Tiny, Fanless, Mac mini KILLER!</a><br />
<br />
Thanks!<br />
naudafor</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: naudafor</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/intel-nuc-10-frost-canyon.289485/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-60043689859986398672023-07-30T09:53:00.001+03:002023-07-30T09:53:56.188+03:00Ivy Bridge platform stuck on [EB|#LOG:EXITBS:START], with CFG Lock disabled<div id="tm-catalina">
<div class="bbWrapper">Hello everyone,<br />
<br />
I'm reaching this forum for some help on my Ivy Bridge Hackintosh.<br />
<br />
Recently, I followed dortania's guide to make opencore bootloader(debug version), but stuck on EB:LOG:EXITBS:START, so I followed the guide on web using PMPatch to disable the CFG Lock, and changed AppleXcpmCfgLock and AppleCpuPmCfgLock to false. However, when I restart to OC,it still stuck on that screen, I searched for solution and made no sense but to seek for help on the forum.<br />
<br />
System info:<br />
<br />
CPU: E3...<br />
<br />
<a href="https://www.tonymacx86.com/threads/ivy-bridge-platform-stuck-on-eb-log-exitbs-start-with-cfg-lock-disabled.326611/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: texsd</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/ivy-bridge-platform-stuck-on-eb-log-exitbs-start-with-cfg-lock-disabled.326611/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-34086998299702684602023-07-15T20:54:00.001+03:002023-07-15T20:54:28.704+03:00GA X99 UD4 Hackintosh build help?<div id="tm-catalina">
<div class="bbWrapper">Can anyone point me to or advise on building an x99 Hack? I want to install Catalina if possible? I already have a ssd running windows 10. I want to keep that, but also add another ssd with Hackintosh. Whats the best way to go with this. Also I have a gtx 1080 ti GPU. Will that be a problem?</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: leonado</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/ga-x99-ud4-hackintosh-build-help.326444/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0tag:blogger.com,1999:blog-2499792346422287330.post-46819747442115686702023-07-10T03:53:00.001+03:002023-07-10T03:53:49.779+03:00Mac OS 10.5.7 cannot be installed on this computer.<div id="tm-catalina">
<div class="bbWrapper"><img src="https://www.tonymacx86.com/attachments/image-jpg.568875/" class="bbImage" alt="image.jpg" title="image.jpg" width="4032" height="3024" /><br />
<br />
This is probably an easy fix but dose any one know how to bypass or fix this.</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: josha12</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/mac-os-10-5-7-cannot-be-installed-on-this-computer.326386/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com3tag:blogger.com,1999:blog-2499792346422287330.post-23042137347594795522023-07-03T20:53:00.001+03:002023-07-03T20:53:57.979+03:00Catalina sudden slowdown running<div id="tm-catalina">
<div class="bbWrapper">I've had Catalina running on this old socket 775 for a while now with no problems. I have 2 hdd fitted. One boots to Mojave the other to Catalina.<br />
Catalina is the default boot. This morning I booted it up to see some errors as it eventually got to the clover screen, and then continued to boot. It crawled on the apple logo about 20 times slower than normal. Eventually I got to the desktop with the hard disk light nearly always on. I opened disk Utility, ran first aid which reported no...<br />
<br />
<a href="https://www.tonymacx86.com/threads/catalina-sudden-slowdown-running.326286/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: leonado</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/catalina-sudden-slowdown-running.326286/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com1tag:blogger.com,1999:blog-2499792346422287330.post-64839194751547440962023-07-03T12:53:00.001+03:002023-07-03T12:53:45.277+03:00Z420rx580 setup Want catalina<div id="tm-catalina">
<div class="bbWrapper">Hello, dear friends!<br />
I have a good setup on hp z420:<br />
Xeon E5-2670, 32gb 2x16 ddr3, aorus rx580, kingston ssd 240 + wd blue hdd 750gb. I want to install catalina on it, but don't want to have a problem with sleep-mode, usb3 and audio<br />
Can you help me?</div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: LolPlayYT</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/z420-rx580-setup-want-catalina.326281/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com1tag:blogger.com,1999:blog-2499792346422287330.post-90730994514754742482023-06-26T18:54:00.001+03:002023-06-26T18:54:41.315+03:00Unable to finish Catalina install - ASUS z490 & i5 10400 with iGPU<div id="tm-catalina">
<div class="bbWrapper">Can someone give me some advice on this current install? I'm using "EFI for Catalina" from <a href="https://www.tonymacx86.com/members/103980/" class="username" data-xf-init="member-tooltip" data-user-id="103980" data-username="@Middleman">@Middleman</a> and I can't seem to finish. The install gets to about 2 minutes left and then restarts. I attached an image below of the message that flashes before restarting. After it reboots, if I select my Samsung SSD I am installing to, it will throw up what I'm guessing is an error (2nd image attached). I keep getting that same error if I continue selecting my SSD drive at boot.<br />
<br />
I'm...<br />
<br />
<a href="https://www.tonymacx86.com/threads/unable-to-finish-catalina-install-asus-z490-i5-10400-with-igpu.326195/" class="link link--internal">Read more</a></div>
<img border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" height="0" width="0" /></div>
<p class="tm-author">Author: szalayfilm</p>
<div class="downloadb catalina"><a target="_blank" href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/unable-to-finish-catalina-install-asus-z490-i5-10400-with-igpu.326195/">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com1tag:blogger.com,1999:blog-2499792346422287330.post-4291077331230942282023-06-23T13:54:00.002+03:002023-11-02T16:34:53.632+03:00Random OCB: Start Image Failed...at startup<div id="tm-catalina">
<div class="bbWrapper">Hello my catalina system is working quite well, however I randomly have this message at statup (screen attached)... a little stressful, has anyone experienced this before ?<br /><br /><div class="bbWrapper">Here are some general steps you can take to troubleshoot this issue:</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Check Your Config.plist: This file contains all the settings for OpenCore. Ensure that it's properly configured for your system. Using a tool like ProperTree or OpenCore Configurator can help validate your configuration.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Update OpenCore and Kexts: Make sure you're using the latest version of OpenCore and that all your kexts (kernel extensions) are up to date. Sometimes, issues are fixed in newer releases.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Verify Boot Arguments: Check the boot arguments in your config.plist to ensure they're appropriate for your system and there aren't any typos or incorrect settings.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Check ACPI Patches: If you're using any ACPI patches, make sure they are correct and necessary for your system.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">NVRAM Reset: Sometimes, clearing NVRAM can resolve boot issues. You can do this from the OpenCore boot picker if you have the option enabled.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Review the OpenCore Guide: The OpenCore Install Guide is an invaluable resource. Review the guide to ensure all steps were followed correctly for your specific system.</div><div class="bbWrapper"><br /></div><div class="bbWrapper">Seek Help from the Community: Hackintosh communities like r/hackintosh on Reddit or forums like tonymacx86.com and InsanelyMac can be very helpful. Provide them with details about your hardware, your OpenCore version, and the steps you've taken to troubleshoot.</div><div class="bbWrapper"><br /></div></div>
<img border="0" height="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgX2frOwNGgyj0TwdcMKYCRUINV9NFJhQYmC657NaATvu4MoET29EAQijJSwqoOAR9zIW4s4pcOGtcsn8itB1IVR-Ei1SviBDbbXTEOou7IqGaKE3aXQcs0Qnry53nZVbbTOm6RSUc4jXc/s72-w200-c-h200/catalina-installer-icon.png" width="0" /></div>
<p class="tm-author">Author: lozlab</p>
<div class="downloadb catalina"><a href="http://adf.ly/5142286/https://www.tonymacx86.com/threads/random-ocb-start-image-failed-at-startup.326143/" target="_blank">[► Source]</a></div>
Catalinahttp://www.blogger.com/profile/05684109632490295101noreply@blogger.com0