Share
Share
Share

HP Prodesk 400 G4 SFF Hackintosh OpenCore

HP Prodesk 400 G4 SFF Hackintosh OpenCore

HP Prodesk 400 G4 SFF Hackintosh Opencore EFI Catalina 10.15.6

  • Intel Core i5-7500 (3.4GHz Upto 3.8GHz 6MB)
  • 16GB RAM DDR4
  • 120GB SSD Samsung 840 EVO,
  • Intel HD Graphics 620
  • Network (RJ-45) Integrated Realtek RTL8111G GbE
  • Audio Jack : Conexant CX20632 codec with universal audio

#Not working

  • Sleep/Wake : Can not wake, Black screen after sleep
  • ​

https://preview.redd.it/7bir0utrmwg51.png?width=3840&format=png&auto=webp&s=8b927c1cbe46366cb57b3643f9326b2b1bc1f679

EFI: https://github.com/hoanngothanh/HP-Prodesk-400-G4-SFF-Opencore-EFI

submitted by /u/HOANNGOTHANH
[link] [comments]

Guide: Installing Hackintosh on HP Prodesk 400 G4 SFF Using OpenCore

Target Audience: Intermediate

Preparation:

  • Check compatibility: Ensure your HP Prodesk 400 G4 SFF matches the specifications (Intel Core i5-7500, 16GB DDR4 RAM, 120GB Samsung 840 EVO SSD, Intel HD Graphics 620, Realtek RTL8111G network, Conexant CX20632 audio codec).
  • Backup data: Always back up your data before proceeding with installation.

Installation Steps:

  • Create a Bootable Installer:
    • Download macOS Catalina 10.15.6.
    • Prepare a USB drive (16GB or larger) and create a bootable macOS installer using a tool like BalenaEtcher.
  • Download and Prepare EFI Folder:
    • Download the EFI folder specific to HP Prodesk 400 G4 SFF from this link.
    • Copy the EFI folder to the EFI partition of your bootable USB drive.
  • BIOS Settings:
    • Disable Secure Boot.
    • Enable UEFI mode.
    • Set SATA to AHCI mode.
  • Install macOS:
    • Insert the USB drive into your HP Prodesk 400 G4 SFF.
    • Boot from the USB drive.
    • Follow the on-screen instructions to install macOS Catalina.
  • Post-Installation:
    • Once the installation is complete, boot from the USB again but select your system drive this time.
    • Copy the EFI folder from the USB drive to the EFI partition of your system drive.
    • You may need to configure system-specific settings (like serial number) using OpenCore Configurator.
  • Known Issues:
    • Sleep/Wake: The system cannot wake from sleep, resulting in a black screen. This is a common issue and may require specific tweaks in the EFI configuration or BIOS settings to resolve.
  • Visual Aid:
    • Diagrams for BIOS settings.
    • Screenshots for each installation step.
  • Feedback and Updates:
    • For feedback or questions, visit our iATKOS Project Page.
    • Regular updates will be provided to address new issues and macOS updates.
[► Source]

Post a Comment