This is my first ever hackintosh experience and based on the challenges I experienced I would probably change a lot of stuff in this build starting with the motherboard which made me crazy and made me question every step I made building this setup.
I successfully managed to install Mojave 10.4.5 on my system using the vanilla installation guide on the right tab (with some extra help from other guides aimed around MSI motherboards specifically as they are not good OOB like Gigabyte and Asus Motherboards. The main problem that I phased was the BIOS and after days of trying a lot of different scenarios , at the end what worked is that I had to downgrade theBIOS to the 1st version.
So everything works except for the BCM94352Z that i replaced the existing intel chip with. I tried following this guide but it had no impact on the system.
also IGPU is not detected and reboot/restart is not working
I did not edit a single word in my config.plist because i really do not understand 100% how it works and I'm afraid to screw things up
I will leave a link to my EFI Folder and I would really appreciate any help to Fix those problems above
https://drive.google.com/open?id=1EPD8jQ8pIIf6BX5crxh_0BwaPNvgqZEC
[link] [comments]
Post a Comment